ShellCrash/scripts/init.sh

#!/bin/sh
# Copyright (C) Juewuy

version=1.7.1

setdir(){
	dir_avail(){
		df -h $1 |awk '{ for(i=1;i<=NF;i++){ if(NR==1){ arr[i]=$i; }else{ arr[i]=arr[i]" "$i; } } } END{ for(i=1;i<=NF;i++){ print arr[i]; } }' |grep Ava |awk '{print $2}'
	}
	set_usb_dir(){
		echo -e "请选择安装目录"
		du -hL /mnt | awk '{print " "NR" "$2"  "$1}'
		read -p "请输入相应数字 > " num
		dir=$(du -hL /mnt | awk '{print $2}' | sed -n "$num"p)
		if [ -z "$dir" ];then
			echo -e "\033[31m输入错误！请重新设置！\033[0m"
			set_usb_dir
		fi
	}
echo -----------------------------------------------
if [ -n "$systype" ];then
	[ "$systype" = "Padavan" ] && dir=/etc/storage
	[ "$systype" = "mi_snapshot" ] && {
		echo -e "\033[33m检测到当前设备为小米官方系统，请选择安装位置\033[0m"	
		echo -e " 1 安装到/data目录(推荐，支持软固化功能)"
		echo -e " 2 安装到USB设备(支持软固化功能)"
		[ "$(dir_avail /etc)" != 0 ] && echo -e " 3 安装到/etc目录(不推荐)"
		echo -e " 0 退出安装"
		echo -----------------------------------------------
		read -p "请输入相应数字 > " num
		case "$num" in 
		1)
			dir=/data
			;;
		2)
			set_usb_dir ;;
		3)
			if [ "$(dir_avail /etc)" != 0 ];then
				dir=/etc
				systype=""
			else
				echo -e "\033[31m你的设备不支持安装到/etc目录，已改为安装到/data\033[0m"	
				dir=data
			fi
			;;
		*)
			exit 1 ;;
		esac
	}
	[ "$systype" = "asusrouter" ] && {
		echo -e "\033[33m检测到当前设备为华硕固件，请选择安装方式\033[0m"	
		echo -e " 1 基于USB设备安装(通用，须插入\033[31m任意\033[0mUSB设备)"
		echo -e " 2 基于自启脚本安装(仅支持梅林及部分官改固件)"
		echo -e " 0 退出安装"
		echo -----------------------------------------------
		read -p "请输入相应数字 > " num
		case "$num" in 
		1)
			read -p "将脚本安装到USB存储/系统闪存？(1/0) > " res
			[ "$res" = "1" ] && set_usb_dir || dir=/jffs
			usb_status=1
			;;
		2)
			echo -e "如无法正常开机启动，请重新使用USB方式安装！"
			sleep 2
			dir=/jffs ;;
		*)
			exit 1 ;;
		esac
	}
else
	echo -e "\033[33m安装ShellClash至少需要预留约1MB的磁盘空间\033[0m"	
	echo -e " 1 在\033[32m/etc目录\033[0m下安装(适合root用户)"
	echo -e " 2 在\033[32m/usr/share目录\033[0m下安装(适合Linux系统)"
	echo -e " 3 在\033[32m当前用户目录\033[0m下安装(适合非root用户)"
	echo -e " 4 在\033[32m外置存储\033[0m中安装"
	echo -e " 5 手动设置安装目录"
	echo -e " 0 退出安装"
	echo -----------------------------------------------
	read -p "请输入相应数字 > " num
	#设置目录
	if [ -z $num ];then
		echo 安装已取消
		exit 1;
	elif [ "$num" = "1" ];then
		dir=/etc
	elif [ "$num" = "2" ];then
		dir=/usr/share
	elif [ "$num" = "3" ];then
		dir=~/.local/share
		mkdir -p ~/.config/systemd/user
	elif [ "$num" = "4" ];then
		set_usb_dir
	elif [ "$num" = "5" ];then
		echo -----------------------------------------------
		echo '可用路径 剩余空间:'
		df -h | awk '{print $6,$4}'| sed 1d 
		echo '路径是必须带 / 的格式，注意写入虚拟内存(/tmp,/opt,/sys...)的文件会在重启后消失！！！'
		read -p "请输入自定义路径 > " dir
		if [ -z "$dir" ];then
			echo -e "\033[31m路径错误！请重新设置！\033[0m"
			setdir
		fi
	else
		echo 安装已取消！！！
		exit 1;
	fi
fi

if [ ! -w $dir ];then
	echo -e "\033[31m没有$dir目录写入权限！请重新设置！\033[0m" && sleep 1 && setdir
else
	echo -e "目标目录\033[32m$dir\033[0m空间剩余：$(dir_avail $dir)"
	read -p "确认安装？(1/0) > " res
	[ "$res" = "1" ] && clashdir=$dir/clash || setdir
fi
}
setconfig(){
	#参数1代表变量名，参数2代表变量值,参数3即文件路径
	[ -z "$3" ] && configpath=$clashdir/mark || configpath=$3
	[ -n "$(grep -E "^${1}=" $configpath)" ] && sed -i "s#^${1}=\(.*\)#${1}=${2}#g" $configpath || echo "${1}=${2}" >> $configpath
}

$clashdir/start.sh stop 2>/dev/null #防止进程冲突
#特殊固件识别及标记
[ -f "/etc/storage/started_script.sh" ] && {
	systype=Padavan #老毛子固件
	initdir='/etc/storage/started_script.sh'
	}
[ -d "/jffs" ] && {
	systype=asusrouter #华硕固件
	[ -f "/jffs/.asusrouter" ] && initdir='/jffs/.asusrouter'
	[ -d "/jffs/scripts" ] && initdir='/jffs/scripts/nat-start' 
	}
[ -f "/data/etc/crontabs/root" ] && systype=mi_snapshot #小米设备

#检查环境变量
[ -z "$clashdir" -a -d /tmp/SC_tmp ] && {
	setdir
}
#移动文件
mkdir -p $clashdir
mv -f /tmp/SC_tmp/* $clashdir 2>/dev/null

#初始化
[ -f "$clashdir/mark" ] || echo '#ShellClash配置文件，不明勿动！' > $clashdir/mark
#本地安装跳过新手引导
[ -z "$url" ] && setconfig userguide 1
#判断系统类型写入不同的启动文件
if [ -f /etc/rc.common ];then
		#设为init.d方式启动
		cp -f $clashdir/clashservice /etc/init.d/clash
		chmod 755 /etc/init.d/clash
else
	[ "$(pidof systemd)" = 1 ] && [ -w /etc/systemd/system ] && sysdir=/etc/systemd/system
	[ "$(pidof systemd)" = 1 ] && [ -w /usr/lib/systemd/system ] && sysdir=/usr/lib/systemd/system
	if [ -n "$sysdir" ];then
		#设为systemd方式启动
		mv -f $clashdir/clash.service $sysdir/clash.service 2>/dev/null
		sed -i "s%/etc/clash%$clashdir%g" $sysdir/clash.service
		systemctl daemon-reload
	else
		#设为保守模式启动
		setconfig start_old 已开启
	fi
fi
#修饰文件及版本号
type bash &>/dev/null && shtype=bash || shtype=sh 
sed -i "s|/bin/sh|/bin/$shtype|" $clashdir/start.sh
chmod 755 $clashdir/start.sh
setconfig versionsh_l $version
#设置更新地址
[ -n "$url" ] && setconfig update_url $url
#设置环境变量
[ -w /opt/etc/profile ] && profile=/opt/etc/profile
[ -w /jffs/configs/profile.add ] && profile=/jffs/configs/profile.add
[ -w ~/.bashrc ] && profile=~/.bashrc
[ -w /etc/profile ] && profile=/etc/profile
if [ -n "$profile" ];then
	sed -i '/alias clash=*/'d $profile
	echo "alias clash=\"$shtype $clashdir/clash.sh\"" >> $profile #设置快捷命令环境变量
	sed -i '/export clashdir=*/'d $profile
	echo "export clashdir=\"$clashdir\"" >> $profile #设置clash路径环境变量
	source $profile &>/dev/null
	#适配zsh环境变量
	[ -n "$(ls -l /bin/sh|grep -oE 'zsh')" ] && [ -z "$(cat ~/.zshrc 2>/dev/null|grep clashdir)" ] && { 
		echo "alias clash=\"$shtype $clashdir/clash.sh\"" >> ~/.zshrc
		echo "export clashdir=\"$clashdir\"" >> ~/.zshrc
		source ~/.zshrc &>/dev/null
	}
else
	echo -e "\033[33m无法写入环境变量！请检查安装权限！\033[0m"
	exit 1
fi
#梅林/Padavan额外设置
[ -n "$initdir" ] && {
	sed -i '/ShellClash初始化/'d $initdir
	touch $initdir
	echo "$clashdir/start.sh init #ShellClash初始化脚本" >> $initdir
	chmod a+rx $initdir 2>/dev/null
	setconfig initdir $initdir
	}
#小米镜像化OpenWrt额外设置
if [ "$systype" = "mi_snapshot" ];then
	chmod 755 $clashdir/misnap_init.sh
	uci set firewall.ShellClash=include
	uci set firewall.ShellClash.type='script'
	uci set firewall.ShellClash.path='/data/clash/misnap_init.sh'
	uci set firewall.ShellClash.enabled='1'
	uci commit firewall
	setconfig systype $systype
else
	rm -rf $clashdir/misnap_init.sh
fi
#华硕USB启动额外设置
[ "$usb_status" = "1" ]	&& {
	echo "$clashdir/start.sh init #ShellClash初始化脚本" > $clashdir/asus_usb_mount.sh
	nvram set script_usbmount="$clashdir/asus_usb_mount.sh"
	nvram commit
}
#删除临时文件
rm -rf /tmp/*lash*gz
rm -rf /tmp/SC_tmp

sleep 1
echo -e "\033[32m脚本初始化完成,请输入\033[30;47m clash \033[0;33m命令开始使用！\033[0m"