Austin/ShellCrash
1
0
Fork 0
mirror of https://github.com/juewuy/ShellCrash.git synced 2024-11-15 19:22:54 +08:00
Code Issues Actions 1 Packages Projects Releases Wiki Activity
dev
ShellCrash/scripts/webget.sh
juewuy f481248a18 ~修复仅设置ip地址过滤时局域网过滤功能依然显示未启用的bug 
~修复使用自定义ip规则时，singbox内核启动报错的问题
~修复删除自定义ip规则时的报错问题
2024-11-02 19:02:38 +08:00

2553 lines
93 KiB
Bash
Raw Permalink Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

#!/bin/sh
# Copyright (C) Juewuy
error_down(){
echo -e "\033[33m请尝试切换至其他安装源后重新下载！\033[0m"
echo -e "或者参考 \033[32;4mhttps://juewuy.github.io/bdaz\033[0m 进行本地安装！"
sleep 1
}
dir_avail(){
df -h >/dev/null 2>&1 && h=$2
df $h $1 |awk '{ for(i=1;i<=NF;i++){ if(NR==1){ arr[i]=$i; }else{ arr[i]=arr[i]" "$i; } } } END{ for(i=1;i<=NF;i++){ print arr[i]; } }' |grep -E 'Ava|可用' |awk '{print $2}'
}
#导入订阅、配置文件相关
setrules(){ #自定义规则
set_rule_type(){
echo -----------------------------------------------
echo -e "\033[33m请选择规则类型\033[0m"
echo $rule_type | awk -F ' ' '{for(i=1;i<=NF;i++){print i" "$i}}'
echo -e " 0 返回上级菜单"
read -p "请输入对应数字 > " num
case $num in
0) ;;
[0-9]*)
if [ $num -gt $(echo $rule_type | awk -F " " '{print NF}') ];then
errornum
else
rule_type_set=$(echo $rule_type|cut -d' ' -f$num)
echo -----------------------------------------------
echo -e "\033[33m请输入规则语句，可以是域名、泛域名、IP网段或者其他匹配规则类型的内容\033[0m"
read -p "请输入对应规则 > " rule_state_set
[ -n "$rule_state_set" ] && set_group_type || errornum
fi
;;
*)
errornum
;;
esac
}
set_group_type(){
echo -----------------------------------------------
echo -e "\033[36m请选择具体规则\033[0m"
echo -e "\033[33m此处规则读取自现有配置文件，如果你后续更换配置文件时运行出错，请尝试重新添加\033[0m"
echo $rule_group | awk -F '#' '{for(i=1;i<=NF;i++){print i" "$i}}'
echo -e " 0 返回上级菜单"
read -p "请输入对应数字 > " num
case $num in
0) ;;
[0-9]*)
if [ $num -gt $(echo $rule_group | awk -F "#" '{print NF}') ];then
errornum
else
rule_group_set=$(echo $rule_group|cut -d'#' -f$num)
rule_all="- ${rule_type_set},${rule_state_set},${rule_group_set}"
[ -n "$(echo IP-CIDR SRC-IP-CIDR IP-CIDR6|grep "$rule_type_set")" ] && rule_all="${rule_all},no-resolve"
echo $rule_all >> $YAMLSDIR/rules.yaml
echo -----------------------------------------------
echo -e "\033[32m添加成功！\033[0m"
fi
;;
*)
errornum
;;
esac
}
del_rule_type(){
echo -e "输入对应数字即可移除相应规则:"
sed -i '/^ *$/d; /^#/d' $YAMLSDIR/rules.yaml
cat $YAMLSDIR/rules.yaml | grep -Ev '^#' | awk -F "#" '{print " "NR" "$1$2$3}'
echo -----------------------------------------------
echo -e " 0 返回上级菜单"
read -p "请输入对应数字 > " num
case $num in
0) ;;
'') ;;
*)
if [ "$num" -le "$(wc -l < $YAMLSDIR/rules.yaml)" ];then
sed -i "${num}d" $YAMLSDIR/rules.yaml
sleep 1
del_rule_type
else
errornum
fi
;;
esac
}
echo -----------------------------------------------
echo -e "\033[33m你可以在这里快捷管理自定义规则\033[0m"
echo -e "如需批量操作，请手动编辑：\033[36m $YAMLSDIR/rules.yaml\033[0m"
echo -e "\033[33msingbox和clash共用此处规则，可无缝切换！\033[0m"
echo -e "大量规则请尽量使用rule-set功能添加，\033[31m此处过量添加可能导致启动卡顿！\033[0m"
echo -----------------------------------------------
echo -e " 1 新增自定义规则"
echo -e " 2 移除自定义规则"
echo -e " 3 清空规则列表"
[ "$crashcore" = singbox -o "$crashcore" = singboxp ] || echo -e " 4 配置节点绕过: \033[36m$proxies_bypass\033[0m"
echo -e " 0 返回上级菜单"
read -p "请输入对应数字 > " num
case $num in
0)
;;
1)
rule_type="DOMAIN-SUFFIX DOMAIN-KEYWORD IP-CIDR SRC-IP-CIDR DST-PORT SRC-PORT GEOIP GEOSITE IP-CIDR6 DOMAIN"
rule_group="DIRECT#REJECT$(cat $YAMLSDIR/proxy-groups.yaml $YAMLSDIR/config.yaml 2>/dev/null | grep -Ev '^#' | grep -o '\- name:.*' | sed 's/- name: /#/g' | tr -d '\n')"
set_rule_type
setrules
;;
2)
echo -----------------------------------------------
if [ -s $YAMLSDIR/rules.yaml ];then
del_rule_type
else
echo -e "请先添加自定义规则！"
sleep 1
fi
setrules
;;
3)
read -p "确认清空全部自定义规则？(1/0) > " res
[ "$res" = "1" ] && sed -i '/^\s*[^#]/d' $YAMLSDIR/rules.yaml
setrules
;;
4)
echo -----------------------------------------------
if [ "$proxies_bypass" = "未启用" ];then
echo -e "\033[33m本功能会自动将当前配置文件中的节点域名或IP设置为直连规则以防止出现双重流量！\033[0m"
echo -e "\033[33m请确保下游设备使用的节点与ShellCrash中使用的节点相同，否则无法生效！\033[0m"
read -p "启用节点绕过？(1/0) > " res
[ "$res" = "1" ] && proxies_bypass=已启用
else
proxies_bypass=未启用
fi
setconfig proxies_bypass $proxies_bypass
sleep 1
setrules
;;
*)
errornum
;;
esac
}
setgroups(){ #自定义clash策略组
set_group_type(){
echo -----------------------------------------------
echo -e "\033[33m注意策略组名称必须和【自定义规则】或【自定义节点】功能中指定的策略组一致！\033[0m"
echo -e "\033[33m建议先创建策略组，之后可在【自定义规则】或【自定义节点】功能中智能指定\033[0m"
echo -e "\033[33m如需在当前策略组下添加节点，请手动编辑$YAMLSDIR/proxy-groups.yaml\033[0m"
read -p "请输入自定义策略组名称(不支持纯数字且不要包含特殊字符！) > " new_group_name
echo -----------------------------------------------
echo -e "\033[32m请选择策略组【$new_group_name】的类型！\033[0m"
echo $group_type_cn | awk '{for(i=1;i<=NF;i++){print i" "$i}}'
read -p "请输入对应数字 > " num
new_group_type=$(echo $group_type | awk '{print $'"$num"'}')
if [ "$num" = "1" ];then
unset new_group_url interval
else
read -p "请输入测速地址，回车则默认使用https://www.gstatic.com/generate_204 > " new_group_url
[ -z "$new_group_url" ] && new_group_url=https://www.gstatic.com/generate_204
new_group_url="url: '$new_group_url'"
interval="interval: 300"
fi
set_group_add
#添加自定义策略组
cat >> $YAMLSDIR/proxy-groups.yaml <<EOF
- name: $new_group_name
type: $new_group_type
$new_group_url
$interval
proxies:
- DIRECT
EOF
sed -i "/^ *$/d" $YAMLSDIR/proxy-groups.yaml
echo -----------------------------------------------
echo -e "\033[32m添加成功！\033[0m"
}
set_group_add(){
echo -----------------------------------------------
echo -e "\033[36m请选择想要将本策略添加到的策略组\033[0m"
echo -e "\033[32m如需添加到多个策略组，请一次性输入多个数字并用空格隔开\033[0m"
echo -----------------------------------------------
echo $proxy_group | awk -F '#' '{for(i=1;i<=NF;i++){print i" "$i}}'
echo -----------------------------------------------
echo -e " 0 跳过添加"
read -p "请输入对应数字(多个用空格隔开) > " char
case $char in
0) ;;
*)
for num in $char;do
rule_group_set=$(echo $proxy_group|cut -d'#' -f$num)
rule_group_add="${rule_group_add}#${rule_group_set}"
done
if [ -n "$rule_group_add" ];then
new_group_name="$new_group_name$rule_group_add"
unset rule_group_add
else
errornum
fi
;;
esac
}
echo -----------------------------------------------
echo -e "\033[33m你可以在这里快捷管理自定义策略组\033[0m"
echo -e "\033[36m如需修改或批量操作，请手动编辑：$YAMLSDIR/proxy-groups.yaml\033[0m"
echo -----------------------------------------------
echo -e " 1 添加自定义策略组"
echo -e " 2 查看自定义策略组"
echo -e " 3 清空自定义策略组"
echo -e " 0 返回上级菜单"
read -p "请输入对应数字 > " num
case $num in
0)
;;
1)
group_type="select url-test fallback load-balance"
group_type_cn="手动选择 自动选择 故障转移 负载均衡"
proxy_group="$(cat $YAMLSDIR/proxy-groups.yaml $YAMLSDIR/config.yaml 2>/dev/null | sed "/#自定义策略组开始/,/#自定义策略组结束/d" | grep -Ev '^#' | grep -o '\- name:.*' | sed 's/#.*//' | sed 's/- name: /#/g' | tr -d '\n' | sed 's/#//')"
set_group_type
setgroups
;;
2)
echo -----------------------------------------------
cat $YAMLSDIR/proxy-groups.yaml
setgroups
;;
3)
read -p "确认清空全部自定义策略组？(1/0) > " res
[ "$res" = "1" ] && echo '#用于添加自定义策略组' > $YAMLSDIR/proxy-groups.yaml
setgroups
;;
*)
errornum
;;
esac
}
setproxies(){ #自定义clash节点
set_proxy_type(){
echo -----------------------------------------------
echo -e "\033[33m注意节点格式必须是单行,不包括括号,name:必须写在最前,例如：\033[0m"
echo -e "\033[36m【name: \"test\", server: 192.168.1.1, port: 12345, type: socks5, udp: true】\033[0m"
echo -e "更多写法请参考：\033[32m https://juewuy.github.io/ \033[0m"
read -p "请输入节点 > " proxy_state_set
if [ -n "$(echo $proxy_state_set | grep "#" )" ];then
echo -e "\033[33m绝对禁止包含【#】号！！！\033[0m"
elif [ -n "$(echo $proxy_state_set | grep -E "^name:" )" ];then
set_group_add
else
errornum
fi
}
set_group_add(){
echo -----------------------------------------------
echo -e "\033[36m请选择想要将节点添加到的策略组\033[0m"
echo -e "\033[32m如需添加到多个策略组，请一次性输入多个数字并用空格隔开\033[0m"
echo -e "\033[33m如需自定义策略组，请先使用【管理自定义策略组功能】添加\033[0m"
echo -----------------------------------------------
echo $proxy_group | awk -F '#' '{for(i=1;i<=NF;i++){print i" "$i}}'
echo -----------------------------------------------
echo -e " 0 返回上级菜单"
read -p "请输入对应数字(多个用空格隔开) > " char
case $char in
0) ;;
*)
for num in $char;do
rule_group_set=$(echo $proxy_group|cut -d'#' -f$num)
rule_group_add="${rule_group_add}#${rule_group_set}"
done
if [ -n "$rule_group_add" ];then
echo "- {$proxy_state_set}$rule_group_add" >> $YAMLSDIR/proxies.yaml
echo -----------------------------------------------
echo -e "\033[32m添加成功！\033[0m"
unset rule_group_add
else
errornum
fi
;;
esac
}
echo -----------------------------------------------
echo -e "\033[33m你可以在这里快捷管理自定义节点\033[0m"
echo -e "\033[36m如需批量操作，请手动编辑：$YAMLSDIR/proxies.yaml\033[0m"
echo -----------------------------------------------
echo -e " 1 添加自定义节点"
echo -e " 2 管理自定义节点"
echo -e " 3 清空自定义节点"
echo -e " 4 配置节点绕过: \033[36m$proxies_bypass\033[0m"
echo -e " 0 返回上级菜单"
read -p "请输入对应数字 > " num
case $num in
0)
;;
1)
proxy_type="DOMAIN-SUFFIX DOMAIN-KEYWORD IP-CIDR SRC-IP-CIDR DST-PORT SRC-PORT GEOIP GEOSITE IP-CIDR6 DOMAIN MATCH"
proxy_group="$(cat $YAMLSDIR/proxy-groups.yaml $YAMLSDIR/config.yaml 2>/dev/null | sed "/#自定义策略组开始/,/#自定义策略组结束/d" | grep -Ev '^#' | grep -o '\- name:.*' | sed 's/#.*//' | sed 's/- name: /#/g' | tr -d '\n' | sed 's/#//')"
set_proxy_type
setproxies
;;
2)
echo -----------------------------------------------
sed -i '/^ *$/d' $YAMLSDIR/proxies.yaml 2>/dev/null
if [ -s $YAMLSDIR/proxies.yaml ];then
echo -e "当前已添加的自定义节点为:"
cat $YAMLSDIR/proxies.yaml | grep -Ev '^#' | awk -F '[,,}]' '{print NR, $1, $NF}' | sed 's/- {//g'
echo -----------------------------------------------
echo -e "\033[33m输入节点对应数字可以移除对应节点\033[0m"
read -p "请输入对应数字 > " num
if [ $num -le $(cat $YAMLSDIR/proxies.yaml | grep -Ev '^#' | wc -l) ];then
sed -i "$num{/^\s*[^#]/d}" $YAMLSDIR/proxies.yaml
else
errornum
fi
else
echo -e "请先添加自定义节点！"
sleep 1
fi
setproxies
;;
3)
read -p "确认清空全部自定义节点？(1/0) > " res
[ "$res" = "1" ] && sed -i '/^\s*[^#]/d' $YAMLSDIR/proxies.yaml 2>/dev/null
setproxies
;;
4)
echo -----------------------------------------------
if [ "$proxies_bypass" = "未启用" ];then
echo -e "\033[33m本功能会自动将当前配置文件中的节点域名或IP设置为直连规则以防止出现双重流量！\033[0m"
echo -e "\033[33m请确保下游设备使用的节点与ShellCrash中使用的节点相同，否则无法生效！\033[0m"
read -p "启用节点绕过？(1/0) > " res
[ "$res" = "1" ] && proxies_bypass=已启用
else
proxies_bypass=未启用
fi
setconfig proxies_bypass $proxies_bypass
sleep 1
setrules
;;
*)
errornum
;;
esac
}
gen_clash_providers(){ #生成clash的providers配置文件
gen_clash_providers_txt(){
if [ -n "$(echo $2|grep -E '^./')" ];then
local type=file
local path=$2
local download_url=
else
local type=http
local path="./providers/${1}.yaml"
local download_url=$2
fi
cat >> $TMPDIR/providers/providers.yaml <<EOF
${1}:
type: $type
url: "$download_url"
path: "$path"
interval: 43200
health-check:
enable: true
lazy: true
url: "https://www.gstatic.com/generate_204"
interval: 600
EOF
[ "$crashcore" = 'meta' ] && {
[ "$skip_cert" != "未开启" ] && skip_cert_verify='skip-cert-verify: true'
cat >> $TMPDIR/providers/providers.yaml <<EOF
override:
udp: true
$skip_cert_verify
EOF
}
}
if [ -z "$(grep "provider_temp_${coretype}" ${CRASHDIR}/configs/ShellCrash.cfg)" ];then
provider_temp_file=$(sed -n "1 p" ${CRASHDIR}/configs/${coretype}_providers.list | awk '{print $2}')
else
provider_temp_file=$(grep "provider_temp_${coretype}" ${CRASHDIR}/configs/ShellCrash.cfg | awk -F '=' '{print $2}')
fi
echo -----------------------------------------------
if [ -s ${provider_temp_file} ];then
ln -sf ${provider_temp_file} ${TMPDIR}/provider_temp_file
else
echo -e "\033[33m正在获取在线模版！\033[0m"
${CRASHDIR}/start.sh get_bin ${TMPDIR}/provider_temp_file rules/${coretype}_providers/${provider_temp_file}
[ -z "$(grep -o 'rules' ${TMPDIR}/provider_temp_file)" ] && {
echo -e "\033[31m下载失败，请尝试更换安装源！\033[0m"
setserver
setproviders
}
fi
#生成proxy_providers模块
mkdir -p ${TMPDIR}/providers
#预创建文件并写入对应文件头
echo 'proxy-providers:' > ${TMPDIR}/providers/providers.yaml
#切割模版文件
sed -n '/^proxy-groups:/,/^[a-z]/ { /^rule/d; p; }' ${TMPDIR}/provider_temp_file > ${TMPDIR}/providers/proxy-groups.yaml
sed -n '/^rule/,$p' ${TMPDIR}/provider_temp_file > ${TMPDIR}/providers/rules.yaml
rm -rf ${TMPDIR}/provider_temp_file
#生成providers模块
if [ -n "$2" ];then
gen_clash_providers_txt $1 $2
providers_tags=$1
echo ' - {name: '${1}', type: url-test, tolerance: 100, lazy: true, use: ['${1}']}' >> ${TMPDIR}/providers/proxy-groups.yaml
else
providers_tags=''
while read line;do
tag=$(echo $line | awk '{print $1}')
url=$(echo $line | awk '{print $2}')
providers_tags=$(echo "$providers_tags, $tag" | sed 's/^, //')
gen_clash_providers_txt $tag $url
echo ' - {name: '${tag}', type: url-test, tolerance: 100, lazy: true, use: ['${tag}']}' >> ${TMPDIR}/providers/proxy-groups.yaml
done < ${CRASHDIR}/configs/providers.cfg
fi
#修饰模版文件并合并
sed -i "s/{providers_tags}/$providers_tags/g" ${TMPDIR}/providers/proxy-groups.yaml
cut -c 1- ${TMPDIR}/providers/providers.yaml ${TMPDIR}/providers/proxy-groups.yaml ${TMPDIR}/providers/rules.yaml > ${TMPDIR}/config.yaml
rm -rf ${TMPDIR}/providers
#调用内核测试
${CRASHDIR}/start.sh core_check && ${TMPDIR}/CrashCore -t -d ${BINDIR} -f ${TMPDIR}/config.yaml
if [ "$?" = 0 ];then
echo -e "\033[32m配置文件生成成功！\033[0m"
mv -f ${TMPDIR}/config.yaml ${CRASHDIR}/yamls/config.yaml
read -p "是否立即启动/重启服务？(1/0) > " res
[ "$res" = 1 ] && {
start_core && $CRASHDIR/start.sh cronset '更新订阅'
exit
}
else
rm -rf ${TMPDIR}/CrashCore
rm -rf ${TMPDIR}/config.yaml
echo -e "\033[31m生成配置文件出错，请仔细检查输入！\033[0m"
fi
}
gen_singbox_providers(){ #生成singbox的providers配置文件
gen_singbox_providers_txt(){
if [ -n "$(echo $2|grep -E '^./')" ];then
cat >> ${TMPDIR}/providers/providers.json <<EOF
{
"tag": "${1}",
"type": "local",
"healthcheck_url": "https://www.gstatic.com/generate_204",
"healthcheck_interval": "10m",
"path": "${2}"
},
EOF
else
cat >> ${TMPDIR}/providers/providers.json <<EOF
{
"tag": "${1}",
"type": "remote",
"healthcheck_url": "https://www.gstatic.com/generate_204",
"healthcheck_interval": "10m",
"download_url": "${2}",
"path": "./providers/${1}.yaml",
"download_ua": "clash.meta",
"download_interval": "24h",
"download_detour": "DIRECT"
},
EOF
fi
}
if [ -z "$(grep "provider_temp_${coretype}" ${CRASHDIR}/configs/ShellCrash.cfg)" ];then
provider_temp_file=$(sed -n "1 p" ${CRASHDIR}/configs/${coretype}_providers.list | awk '{print $2}')
else
provider_temp_file=$(grep "provider_temp_${coretype}" ${CRASHDIR}/configs/ShellCrash.cfg | awk -F '=' '{print $2}')
fi
echo -----------------------------------------------
if [ -s ${provider_temp_file} ];then
ln -sf ${provider_temp_file} ${TMPDIR}/provider_temp_file
else
echo -e "\033[33m正在获取在线模版！\033[0m"
${CRASHDIR}/start.sh get_bin ${TMPDIR}/provider_temp_file rules/${coretype}_providers/${provider_temp_file}
[ -z "$(grep -o 'route' ${TMPDIR}/provider_temp_file)" ] && {
echo -e "\033[31m下载失败，请尝试更换安装源！\033[0m"
setserver
setproviders
}
fi
#生成outbound_providers模块
mkdir -p ${TMPDIR}/providers
#预创建文件并写入对应文件头
cat > ${TMPDIR}/providers/providers.json <<EOF
{
"outbound_providers": [
EOF
cat > ${TMPDIR}/providers/outbounds_add.json <<EOF
{
"outbounds": [
EOF
#单独指定节点时使用特殊方式
if [ -n "$2" ];then
gen_singbox_providers_txt $1 $2
providers_tags=\"$1\"
echo '{ "tag": "'${1}'", "type": "urltest", "tolerance": 100, "providers": "'${1}'", "includes": ".*" },' >> ${TMPDIR}/providers/outbounds_add.json
else
providers_tags=''
while read line;do
tag=$(echo $line | awk '{print $1}')
url=$(echo $line | awk '{print $2}')
providers_tags=$(echo "$providers_tags, \"$tag\"" | sed 's/^, //')
gen_singbox_providers_txt $tag $url
echo '{ "tag": "'${tag}'", "type": "urltest", "tolerance": 100, "providers": "'${tag}'", "includes": ".*" },' >> ${TMPDIR}/providers/outbounds_add.json
done < ${CRASHDIR}/configs/providers.cfg
fi
#修复文件格式
sed -i '$s/},/}]}/' ${TMPDIR}/providers/outbounds_add.json
sed -i '$s/},/}]}/' ${TMPDIR}/providers/providers.json
#使用模版生成outbounds和rules模块
cat ${TMPDIR}/provider_temp_file | sed "s/{providers_tags}/$providers_tags/g" >> ${TMPDIR}/providers/outbounds.json
rm -rf ${TMPDIR}/provider_temp_file
#调用内核测试
${CRASHDIR}/start.sh core_check && ${TMPDIR}/CrashCore merge ${TMPDIR}/config.json -C ${TMPDIR}/providers
if [ "$?" = 0 ];then
echo -e "\033[32m配置文件生成成功！\033[0m"
mv -f ${TMPDIR}/config.json ${CRASHDIR}/jsons/config.json
rm -rf ${TMPDIR}/providers
read -p "是否立即启动/重启服务？(1/0) > " res
[ "$res" = 1 ] && {
start_core && $CRASHDIR/start.sh cronset '更新订阅'
exit
}
else
echo -e "\033[31m生成配置文件出错，请仔细检查输入！\033[0m"
rm -rf ${TMPDIR}/CrashCore
rm -rf ${TMPDIR}/providers
fi
}
setproviders(){ #自定义providers
#获取模版名称
if [ -z "$(grep "provider_temp_${coretype}" ${CRASHDIR}/configs/ShellCrash.cfg)" ];then
provider_temp_des=$(sed -n "1 p" ${CRASHDIR}/configs/${coretype}_providers.list | awk '{print $1}')
else
provider_temp_file=$(grep "provider_temp_${coretype}" ${CRASHDIR}/configs/ShellCrash.cfg | awk -F '=' '{print $2}')
provider_temp_des=$(grep "$provider_temp_file" ${CRASHDIR}/configs/${coretype}_providers.list | awk '{print $1}')
[ -z "$provider_temp_des" ] && provider_temp_des=$provider_temp_file
fi
echo -----------------------------------------------
echo -e "\033[33m你可以在这里快捷管理与生成自定义的providers提供者\033[0m"
echo -e "\033[36m支持在线及本地的Yaml格式配置导入\033[0m"
echo -e "\033[33msingboxp内核暂不支持跳过证书验证功能\033[0m"
[ -s $CRASHDIR/configs/providers.cfg ] && {
echo -----------------------------------------------
echo -e "\033[36m输入对应数字可管理providers提供者\033[0m"
cat $CRASHDIR/configs/providers.cfg | awk -F "#" '{print " "NR" "$1" "$2}'
}
echo -----------------------------------------------
echo -e " a \033[36m添加\033[0mproviders提供者"
echo -e " b \033[32m生成\033[0m基于providers的配置文件"
echo -e " c 选择\033[33m规则模版\033[0m \033[32m$provider_temp_des\033[0m"
echo -e " d \033[31m清空\033[0mproviders列表"
echo -e " e \033[33m清理\033[0mproviders目录"
echo -e " 0 返回上级菜单"
read -p "请输入对应数字 > " num
case $num in
0)
;;
[1-9]|[1-9][0-9])
provider_name=$(sed -n "$num p" $CRASHDIR/configs/providers.cfg | awk '{print $1}')
provider_url=$(sed -n "$num p" $CRASHDIR/configs/providers.cfg | awk '{print $2}')
if [ -z "$provider_name" ];then
errornum
else
echo -----------------------------------------------
echo -e " 1 修改代理提供者：\033[36m$provider_name\033[0m"
echo -e " 2 修改链接地址：\033[32m$provider_url\033[0m"
echo -e " 3 生成\033[33m仅包含此提供者\033[0m的配置文件"
echo -e " 4 \033[31m移除此提供者\033[0m"
echo -----------------------------------------------
echo -e " 0 返回上级菜单"
read -p "请选择需要执行的操作 > " num
case "$num" in
0)
;;
1)
read -p "请输入代理提供者的名称或者代称(如有多个提供者不可重复) > " name
if [ -n "$name" ] && [ -z "$(grep "$name" $CRASHDIR/configs/providers.cfg)" ];then
sed -i "s|$provider_name $provider_url|$name $provider_url|" $CRASHDIR/configs/providers.cfg
else
echo -e "\033[31m输入错误，请重新输入！\033[0m"
fi
;;
2)
read -p "请输入providers订阅地址或本地相对路径 > " link
if [ -n "$(echo $link | grep -E '.*\..*|^\./')" ] && [ -z "$(grep "$link" $CRASHDIR/configs/providers.cfg)" ];then
link=$(echo $link | sed 's/\&/\\\&/g') #特殊字符添加转义
sed -i "s|$provider_name $provider_url|$provider_name $link|" $CRASHDIR/configs/providers.cfg
else
echo -e "\033[31m输入错误，请重新输入！\033[0m"
fi
;;
3)
gen_${coretype}_providers $provider_name $provider_url
;;
4)
sed -i "/^$provider_name /d" $CRASHDIR/configs/providers.cfg
;;
*)
errornum
;;
esac
sleep 1
fi
setproviders
;;
a)
echo -----------------------------------------------
echo -e "支持填写在线的\033[32mYClash订阅地址\033[0m或者\033[32m本地Clash配置文件\033[0m"
echo -e "本地配置文件请放在\033[32m$CRASHDIR\033[0m目录下，并填写相对路径如【\033[32m./providers/test.yaml\033[0m】"
echo -----------------------------------------------
read -p "请输入providers订阅地址或本地相对路径 > " link
[ -n "$(echo $link | grep -E '.*\..*|^\./')" ] && {
read -p "请输入代理提供者的名称或者代号(不可重复) > " name
[ -n "$name" ] && [ -z "$(grep "name" $CRASHDIR/configs/providers.cfg)" ] && {
echo -----------------------------------------------
echo -e "代理提供者：\033[36m$name\033[0m"
echo -e "链接地址/路径：\033[32m$link\033[0m"
read -p "确认添加？(1/0) > " res
[ "$res" = 1 ] && {
echo "$name $link" >> $CRASHDIR/configs/providers.cfg
echo -e "\033[32mproviders已添加！\033[0m"
}
}
}
[ "$?" != 0 ] && echo -e "\033[31m操作已取消！\033[0m"
sleep 1
setproviders
;;
b)
echo -----------------------------------------------
if [ -s $CRASHDIR/configs/providers.cfg ];then
echo -e "\033[33msingboxp与mihomo内核的providers配置文件不互通！\033[0m"
echo -----------------------------------------------
read -p "确认生成${coretype}配置文件？(1/0) > " res
[ "$res" = "1" ] && {
gen_${coretype}_providers
}
else
echo -e "\033[31m你还未添加providers提供者，请先添加！\033[0m"
sleep 1
fi
setproviders
;;
c)
echo -----------------------------------------------
echo -e "当前规则模版为：\033[32m$provider_temp_des\033[0m"
echo -e "\033[33m请选择在线模版：\033[0m"
echo -----------------------------------------------
cat ${CRASHDIR}/configs/${coretype}_providers.list | awk '{print " "NR" "$1}'
echo -----------------------------------------------
echo -e " a 使用\033[36m本地模版\033[0m"
echo -----------------------------------------------
read -p "请输入对应字母或数字 > " num
case $num in
0)
;;
a)
read -p "请输入模版的路径(绝对路径) > " dir
if [ -s $dir ];then
provider_temp_file=$dir
setconfig provider_temp_${coretype} $provider_temp_file
echo -e "\033[32m设置成功！\033[0m"
else
echo -e "\033[31m输入错误，找不到对应模版文件！\033[0m"
fi
sleep 1
;;
*)
provider_temp_file=$(sed -n "$num p" ${CRASHDIR}/configs/${coretype}_providers.list 2>/dev/null | awk '{print $2}')
if [ -z "$provider_temp_file" ];then
errornum
else
setconfig provider_temp_${coretype} $provider_temp_file
fi
;;
esac
setproviders
;;
d)
read -p "确认清空全部providers提供者？(1/0) > " res
[ "$res" = "1" ] && rm -rf $CRASHDIR/configs/providers.cfg
setproviders
;;
e)
echo -e "\033[33m将清空 $CRASHDIR/providers 目录下所有内容\033[0m"
read -p "是否继续？(1/0) > " res
[ "$res" = "1" ] && rm -rf $CRASHDIR/providers
setproviders
;;
*)
errornum
;;
esac
}
set_clash_adv(){ #自定义clash高级规则
[ ! -f $YAMLSDIR/user.yaml ] && cat > $YAMLSDIR/user.yaml <<EOF
#用于编写自定义设定(可参考https://lancellc.gitbook.io/clash/clash-config-file/general 或 https://docs.metacubex.one/function/general)
#端口之类请在脚本中修改，否则不会加载
#port: 7890
EOF
[ ! -f $YAMLSDIR/others.yaml ] && cat > $YAMLSDIR/others.yaml <<EOF
#用于编写自定义的锚点、入站、proxy-providers、sub-rules、rule-set、script等功能
#可参考 https://github.com/MetaCubeX/Clash.Meta/blob/Meta/docs/config.yaml 或 https://lancellc.gitbook.io/clash/clash-config-file/an-example-configuration-file
#此处内容会被添加在配置文件的“proxy-group：”模块的末尾与“rules：”模块之前的位置
#例如：
#proxy-providers:
#rule-providers:
#sub-rules:
#tunnels:
#script:
#listeners:
EOF
echo -----------------------------------------------
echo -e "\033[32m已经创建自定义设定文件：$YAMLSDIR/user.yaml ！\033[0m"
echo -e "\033[33m可用于编写自定义的DNS，等功能\033[0m"
echo -----------------------------------------------
echo -e "\033[32m已经创建自定义功能文件：$YAMLSDIR/others.yaml ！\033[0m"
echo -e "\033[33m可用于编写自定义的锚点、入站、proxy-providers、sub-rules、rule-set、script等功能\033[0m"
echo -----------------------------------------------
echo -e "Windows下请\n使用\033[33mWinSCP软件\033[0m进行编辑！\033[0m"
echo -e "MacOS下请\n使用\033[33mSecureFX软件\033[0m进行编辑！\033[0m"
echo -e "Linux本机可\n使用\033[33mvim\033[0m进行编辑(路由设备可能不显示中文请勿使用)！\033[0m"
}
set_singbox_adv(){ #自定义singbox配置文件
echo -----------------------------------------------
echo -e "singbox配置文件中，支持自定义的模块有：\033[0m"
echo -e "\033[36mlog dns ntp inbounds outbounds outbound_providers route experimental\033[0m"
echo -e "将相应json文件放入\033[33m$JSONSDIR\033[0m目录后即可在启动时加载"
echo -----------------------------------------------
echo -e "使用前请务必参考配置教程:\033[32;4m https://juewuy.github.io/nWTjEpkSK \033[0m"
}
override(){ #配置文件覆写
[ -z "$rule_link" ] && rule_link=1
[ -z "$server_link" ] && server_link=1
echo -----------------------------------------------
echo -e "\033[30;47m 欢迎使用配置文件覆写功能！\033[0m"
echo -----------------------------------------------
echo -e " 1 自定义\033[32m端口及秘钥\033[0m"
echo -e " 2 管理\033[36m自定义规则\033[0m"
[ "$crashcore" = singbox -o "$crashcore" = singboxp ] || {
echo -e " 3 管理\033[33m自定义节点\033[0m"
echo -e " 4 管理\033[36m自定义策略组\033[0m"
}
echo -e " 5 \033[32m自定义\033[0m高级功能"
[ "$disoverride" != 1 ] && echo -e " 9 \033[33m禁用\033[0m配置文件覆写"
echo -----------------------------------------------
[ "$inuserguide" = 1 ] || echo -e " 0 返回上级菜单"
read -p "请输入对应数字 > " num
case "$num" in
0)
;;
1)
if [ -n "$(pidof CrashCore)" ];then
echo -----------------------------------------------
echo -e "\033[33m检测到服务正在运行，需要先停止服务！\033[0m"
read -p "是否停止服务？(1/0) > " res
if [ "$res" = "1" ];then
${CRASHDIR}/start.sh stop
setport
fi
else
setport
fi
override
;;
2)
setrules
override
;;
3)
setproxies
override
;;
4)
setgroups
override
;;
5)
[ "$crashcore" = singbox -o "$crashcore" = singboxp ] && set_singbox_adv || set_clash_adv
sleep 3
override
;;
9)
echo -----------------------------------------------
echo -e "\033[33m此功能可能会导致严重问题！启用后脚本中大部分功能都将禁用！！！\033[0m"
echo -e "如果你不是非常了解$crashcore的运行机制，切勿开启！\033[0m"
echo -e "\033[33m继续后如出现任何问题，请务必自行解决，一切提问恕不受理！\033[0m"
echo -----------------------------------------------
sleep 2
read -p "我确认遇到问题可以自行解决[1/0] > " res
[ "$res" = '1' ] && {
disoverride=1
setconfig disoverride $disoverride
echo -----------------------------------------------
echo -e "\033[32m设置成功！\033[0m"
}
override
;;
*)
errornum
;;
esac
}
gen_link_config(){ #选择在线规则
echo -----------------------------------------------
echo 当前使用规则为：$(grep -aE '^5' ${CRASHDIR}/configs/servers.list | sed -n ""$rule_link"p" | awk '{print $2}')
grep -aE '^5' ${CRASHDIR}/configs/servers.list | awk '{print " "NR" "$2$4}'
echo -----------------------------------------------
echo 0 返回上级菜单
read -p "请输入对应数字 > " num
totalnum=$(grep -acE '^5' ${CRASHDIR}/configs/servers.list )
if [ -z "$num" ] || [ "$num" -gt "$totalnum" ];then
errornum
elif [ "$num" = 0 ];then
echo
elif [ "$num" -le "$totalnum" ];then
#将对应标记值写入配置
rule_link=$num
setconfig rule_link $rule_link
echo -----------------------------------------------
echo -e "\033[32m设置成功！返回上级菜单\033[0m"
fi
}
gen_link_server(){ #选择在线服务器
echo -----------------------------------------------
echo -e "\033[36m以下为互联网采集的第三方服务器，具体安全性请自行斟酌！\033[0m"
echo -e "\033[32m感谢以下作者的无私奉献！！！\033[0m"
echo 当前使用后端为：$(grep -aE '^3|^4' ${CRASHDIR}/configs/servers.list | sed -n ""$server_link"p" | awk '{print $3}')
grep -aE '^3|^4' ${CRASHDIR}/configs/servers.list | awk '{print " "NR" "$3" "$2}'
echo -----------------------------------------------
echo 0 返回上级菜单
read -p "请输入对应数字 > " num
totalnum=$(grep -acE '^3|^4' ${CRASHDIR}/configs/servers.list )
if [ -z "$num" ] || [ "$num" -gt "$totalnum" ];then
errornum
elif [ "$num" = 0 ];then
echo
elif [ "$num" -le "$totalnum" ];then
#将对应标记值写入配置
server_link=$num
setconfig server_link $server_link
echo -----------------------------------------------
echo -e "\033[32m设置成功！返回上级菜单\033[0m"
fi
}
gen_link_flt(){ #在线生成节点过滤
[ -z "$exclude" ] && exclude="未设置"
echo -----------------------------------------------
echo -e "\033[33m当前过滤关键字：\033[47;30m$exclude\033[0m"
echo -----------------------------------------------
echo -e "\033[33m匹配关键字的节点会在导入时被【屏蔽】！！！\033[0m"
echo -e "多个关键字可以用\033[30;47m | \033[0m号分隔"
echo -e "\033[32m支持正则表达式\033[0m，空格请使用\033[30;47m + \033[0m号替代"
echo -----------------------------------------------
echo -e " 000 \033[31m删除\033[0m关键字"
echo -e " 回车 取消输入并返回上级菜单"
echo -----------------------------------------------
read -p "请输入关键字 > " exclude
if [ "$exclude" = '000' ]; then
echo -----------------------------------------------
exclude=''
echo -e "\033[31m 已删除节点过滤关键字！！！\033[0m"
fi
setconfig exclude \'$exclude\'
}
gen_link_ele(){ #在线生成节点筛选
[ -z "$include" ] && include="未设置"
echo -----------------------------------------------
echo -e "\033[33m当前筛选关键字：\033[47;30m$include\033[0m"
echo -----------------------------------------------
echo -e "\033[33m仅有匹配关键字的节点才会被【导入】！！！\033[0m"
echo -e "多个关键字可以用\033[30;47m | \033[0m号分隔"
echo -e "\033[32m支持正则表达式\033[0m，空格请使用\033[30;47m + \033[0m号替代"
echo -----------------------------------------------
echo -e " 000 \033[31m删除\033[0m关键字"
echo -e " 回车 取消输入并返回上级菜单"
echo -----------------------------------------------
read -p "请输入关键字 > " include
if [ "$include" = '000' ]; then
echo -----------------------------------------------
include=''
echo -e "\033[31m 已删除节点匹配关键字！！！\033[0m"
fi
setconfig include \'$include\'
}
get_core_config(){ #调用工具下载
${CRASHDIR}/start.sh get_core_config
if [ "$?" = 0 ];then
if [ "$inuserguide" != 1 ];then
read -p "是否启动服务以使配置文件生效？(1/0) > " res
[ "$res" = 1 ] && start_core || main_menu
exit;
fi
fi
}
gen_core_config_link(){ #在线生成工具
echo -----------------------------------------------
echo -e "\033[30;47m 欢迎使用在线生成配置文件功能！\033[0m"
echo -----------------------------------------------
#设置输入循环
i=1
while [ $i -le 99 ]
do
echo -----------------------------------------------
echo -e "\033[33m本功能依赖第三方在线subconverter服务实现，脚本本身不提供任何代理服务！\033[0m"
echo -e "\033[31m严禁使用本脚本从事任何非法活动，否则一切后果请自负！\033[0m"
echo -----------------------------------------------
echo -e "支持批量(<=99)导入订阅链接、分享链接"
echo -----------------------------------------------
echo -e " 1 \033[36m开始生成配置文件\033[0m（原文件将被备份）"
echo -e " 2 设置\033[31m节点过滤\033[0m关键字 \033[47;30m$exclude\033[0m"
echo -e " 3 设置\033[32m节点筛选\033[0m关键字 \033[47;30m$include\033[0m"
echo -e " 4 选取在线\033[33m配置规则模版\033[0m"
echo -e " 5 \033[0m选取在线生成服务器\033[0m"
echo -e " 0 \033[31m撤销输入并返回上级菜单\033[0m"
echo -----------------------------------------------
read -p "请直接输入第${i}个链接或对应数字选项 > " link
link=$(echo $link | sed 's/\&/%26/g') #处理分隔符
test=$(echo $link | grep "://")
link=`echo ${link/\#*/''}` #删除链接附带的注释内容
link=`echo ${link/\ \(*\)/''}` #删除恶心的超链接内容
link=`echo ${link/*\&url\=/""}` #将完整链接还原成单一链接
link=`echo ${link/\&config\=*/""}` #将完整链接还原成单一链接
if [ -n "$test" ];then
if [ -z "$Url_link" ];then
Url_link="$link"
else
Url_link="$Url_link"\|"$link"
fi
i=$((i+1))
elif [ "$link" = '1' ]; then
if [ -n "$Url_link" ];then
i=100
#将用户链接写入配置
setconfig Https
setconfig Url \'$Url_link\'
#获取在线yaml文件
get_core_config
else
echo -----------------------------------------------
echo -e "\033[31m请先输入订阅或分享链接！\033[0m"
sleep 1
fi
elif [ "$link" = '2' ]; then
gen_link_flt
elif [ "$link" = '3' ]; then
gen_link_ele
elif [ "$link" = '4' ]; then
gen_link_config
elif [ "$link" = '5' ]; then
gen_link_server
elif [ "$link" = 0 ];then
Url_link=""
i=100
else
echo -----------------------------------------------
echo -e "\033[31m请输入正确的链接或者数字！\033[0m"
sleep 1
fi
done
}
set_core_config_link(){ #直接导入配置
echo -----------------------------------------------
echo -e "\033[32m仅限导入完整的配置文件链接！！！\033[0m"
echo -----------------------------------------------
echo -e "\033[33m有流媒体需求，请使用\033[32m6-1在线生成配置文件功能！！！\033[0m"
echo -e "\033[33m如不了解机制，请使用\033[32m6-1在线生成配置文件功能！！！\033[0m"
echo -e "\033[33m如遇任何问题，请使用\033[32m6-1在线生成配置文件功能！！！\033[0m"
echo -e "\033[31m此功能可能会导致部分节点无法连接或者规则覆盖不完整！！！\033[0m"
echo -----------------------------------------------
echo -e "\033[33m0 返回上级菜单\033[0m"
echo -----------------------------------------------
read -p "请输入完整链接 > " link
test=$(echo $link | grep -iE "tp.*://" )
link=`echo ${link/\ \(*\)/''}` #删除恶心的超链接内容
link=`echo ${link//\&/\\\&}` #处理分隔符
if [ -n "$link" -a -n "$test" ];then
echo -----------------------------------------------
echo -e 请检查输入的链接是否正确：
echo -e "\033[4;32m$link\033[0m"
read -p "确认导入配置文件？原配置文件将被备份![1/0] > " res
if [ "$res" = '1' ]; then
#将用户链接写入配置
sed -i '/Url=*/'d $CFG_PATH
setconfig Https \'$link\'
setconfig Url
#获取在线yaml文件
get_core_config
else
set_core_config_link
fi
elif [ "$link" = 0 ];then
i=
else
echo -----------------------------------------------
echo -e "\033[31m请输入正确的配置文件链接地址！！！\033[0m"
echo -e "\033[33m仅支持http、https、ftp以及ftps链接！\033[0m"
sleep 1
set_core_config_link
fi
}
set_core_config(){ #配置文件功能
[ -z "$rule_link" ] && rule_link=1
[ -z "$server_link" ] && server_link=1
[ "$crashcore" = singbox -o "$crashcore" = singboxp ] && config_path=${JSONSDIR}/config.json || config_path=${YAMLSDIR}/config.yaml
echo -----------------------------------------------
echo -e "\033[30;47m ShellCrash配置文件管理\033[0m"
echo -----------------------------------------------
echo -e " 1 在线\033[32m生成$crashcore配置文件\033[0m"
if [ -f "$CRASHDIR"/v2b_api.sh ];then
echo -e " 2 登录\033[33m获取订阅(推荐！)\033[0m"
else
echo -e " 2 在线\033[33m获取完整配置文件\033[0m"
fi
echo -e " 3 本地\033[32m生成providers配置文件\033[0m"
echo -e " 4 本地\033[33m上传完整配置文件\033[0m"
echo -e " 5 设置\033[36m自动更新\033[0m"
echo -e " 6 \033[32m自定义\033[0m配置文件"
echo -e " 7 \033[33m更新\033[0m配置文件"
echo -e " 8 \033[36m还原\033[0m配置文件"
echo -----------------------------------------------
[ "$inuserguide" = 1 ] || echo -e " 0 返回上级菜单"
read -p "请输入对应数字 > " num
case "$num" in
0)
;;
1)
if [ -n "$Url" ];then
echo -----------------------------------------------
echo -e "\033[33m检测到已记录的链接内容：\033[0m"
echo -e "\033[4;32m$Url\033[0m"
echo -----------------------------------------------
read -p "清空链接/追加导入？[1/0] > " res
if [ "$res" = '1' ]; then
Url_link=""
echo -----------------------------------------------
echo -e "\033[31m链接已清空！\033[0m"
else
Url_link=$Url
fi
fi
gen_core_config_link
;;
2)
if [ -f "$CRASHDIR"/v2b_api.sh ];then
. "$CRASHDIR"/v2b_api.sh
set_core_config
else
echo -----------------------------------------------
echo -e "\033[33m此功能可能会导致一些bug！！！\033[0m"
echo -e "强烈建议你使用\033[32m在线生成配置文件功能！\033[0m"
echo -e "\033[33m继续后如出现任何问题，请务必自行解决，一切提问恕不受理！\033[0m"
echo -----------------------------------------------
sleep 1
read -p "我确认遇到问题可以自行解决[1/0] > " res
if [ "$res" = '1' ]; then
set_core_config_link
else
echo -----------------------------------------------
echo -e "\033[32m正在跳转……\033[0m"
sleep 1
gen_core_config_link
fi
fi
;;
3)
if [ "$crashcore" = meta -o "$crashcore" = clashpre ];then
coretype=clash
setproviders
elif [ "$crashcore" = singboxp ];then
coretype=singbox
setproviders
else
echo -e "\033[33msingbox官方内核及Clash基础内核不支持此功能，请先更换内核！\033[0m"
sleep 1
checkupdate && setcore
fi
set_core_config
;;
4)
echo -----------------------------------------------
echo -e "\033[33m请将本地配置文件上传到/tmp目录并重命名为config.yaml或者config.json\033[0m"
echo -e "\033[32m之后重新运行本脚本即可自动弹出导入提示！\033[0m"
exit
;;
5)
source ${CRASHDIR}/task/task.sh && task_menu
set_core_config
;;
6)
checkcfg=$(cat $CFG_PATH)
override
if [ -n "$PID" ];then
checkcfg_new=$(cat $CFG_PATH)
[ "$checkcfg" != "$checkcfg_new" ] && checkrestart
fi
;;
7)
if [ -z "$Url" -a -z "$Https" ];then
echo -----------------------------------------------
echo -e "\033[31m没有找到你的配置文件/订阅链接！请先输入链接！\033[0m"
sleep 1
set_core_config
else
echo -----------------------------------------------
echo -e "\033[33m当前系统记录的链接为：\033[0m"
echo -e "\033[4;32m$Url$Https\033[0m"
echo -----------------------------------------------
read -p "确认更新配置文件？[1/0] > " res
if [ "$res" = '1' ]; then
get_core_config
else
set_core_config
fi
fi
;;
8)
if [ ! -f ${config_path}.bak ];then
echo -----------------------------------------------
echo -e "\033[31m没有找到配置文件的备份！\033[0m"
set_core_config
else
echo -----------------------------------------------
echo -e 备份文件共有"\033[32m`wc -l < ${config_path}.bak`\033[0m"行内容，当前文件共有"\033[32m`wc -l < ${config_path}`\033[0m"行内容
read -p "确认还原配置文件？此操作不可逆！[1/0] > " res
if [ "$res" = '1' ]; then
mv ${config_path}.bak ${config_path}
echo -----------------------------------------------
echo -e "\033[32m配置文件已还原！请手动重启服务！\033[0m"
sleep 1
else
echo -----------------------------------------------
echo -e "\033[31m操作已取消！返回上级菜单！\033[0m"
set_core_config
fi
fi
;;
*)
errornum
esac
}
#下载更新相关
getscripts(){ #更新脚本文件
${CRASHDIR}/start.sh get_bin ${TMPDIR}/update.tar.gz bin/clashfm.tar.gz
if [ "$?" != "0" ];then
echo -e "\033[33m文件下载失败！\033[0m"
error_down
else
${CRASHDIR}/start.sh stop 2>/dev/null
#解压
echo -----------------------------------------------
echo 开始解压文件！
mkdir -p ${CRASHDIR} > /dev/null
tar -zxf "${TMPDIR}/update.tar.gz" ${tar_para} -C ${CRASHDIR}/
if [ $? -ne 0 ];then
echo -e "\033[33m文件解压失败！\033[0m"
error_down
else
source ${CRASHDIR}/init.sh >/dev/null
echo -e "\033[32m脚本更新成功！\033[0m"
fi
fi
rm -rf ${TMPDIR}/update.tar.gz
exit
}
setscripts(){
echo -----------------------------------------------
echo -e "当前脚本版本为：\033[33m $versionsh_l \033[0m"
echo -e "最新脚本版本为：\033[32m $version_new \033[0m"
echo -e "注意更新时会停止服务！"
echo -----------------------------------------------
read -p "是否更新脚本？[1/0] > " res
if [ "$res" = '1' ]; then
#下载更新
getscripts
#提示
echo -----------------------------------------------
echo -e "\033[32m管理脚本更新成功!\033[0m"
echo -----------------------------------------------
exit;
fi
}
getcpucore(){ #自动获取内核架构
cputype=$(uname -ms | tr ' ' '_' | tr '[A-Z]' '[a-z]')
[ -n "$(echo $cputype | grep -E "linux.*armv.*")" ] && cpucore="armv5"
[ -n "$(echo $cputype | grep -E "linux.*armv7.*")" ] && [ -n "$(cat /proc/cpuinfo | grep vfp)" ] && [ ! -d /jffs ] && cpucore="armv7"
[ -n "$(echo $cputype | grep -E "linux.*aarch64.*|linux.*armv8.*")" ] && cpucore="arm64"
[ -n "$(echo $cputype | grep -E "linux.*86.*")" ] && cpucore="386"
[ -n "$(echo $cputype | grep -E "linux.*86_64.*")" ] && cpucore="amd64"
if [ -n "$(echo $cputype | grep -E "linux.*mips.*")" ];then
mipstype=$(echo -n I | hexdump -o 2>/dev/null | awk '{ print substr($2,6,1); exit}') #通过判断大小端判断mips或mipsle
[ "$mipstype" = "0" ] && cpucore="mips-softfloat" || cpucore="mipsle-softfloat"
fi
[ -n "$cpucore" ] && setconfig cpucore $cpucore
}
setcpucore(){ #手动设置内核架构
cpucore_list="armv5 armv7 arm64 386 amd64 mipsle-softfloat mipsle-hardfloat mips-softfloat"
echo -----------------------------------------------
echo -e "\033[31m仅适合脚本无法正确识别核心或核心无法正常运行时使用！\033[0m"
echo -e "当前可供在线下载的处理器架构为："
echo $cpucore_list | awk -F " " '{for(i=1;i<=NF;i++) {print i" "$i }}'
echo -e "不知道如何获取核心版本？请参考：\033[36;4mhttps://juewuy.github.io/bdaz\033[0m"
echo -----------------------------------------------
read -p "请输入对应数字 > " num
[ -n "$num" ] && setcpucore=$(echo $cpucore_list | awk '{print $"'"$num"'"}' )
if [ -z "$setcpucore" ];then
echo -e "\033[31m请输入正确的处理器架构！\033[0m"
sleep 1
cpucore=""
else
cpucore=$setcpucore
setconfig cpucore $cpucore
fi
}
setcoretype(){ #手动指定内核类型
[ "$crashcore" = singbox -o "$crashcore" = singboxp ] && core_old=singbox || core_old=clash
echo -e "\033[33m请确认该自定义内核的类型：\033[0m"
echo -e " 1 Clash基础内核"
echo -e " 2 Clash-Premium内核"
echo -e " 3 Clash-Meta内核"
echo -e " 4 Sing-Box内核"
echo -e " 5 Sing-Box-Puer内核"
read -p "请输入对应数字 > " num
case "$num" in
2) crashcore=clashpre ;;
3) crashcore=meta ;;
4) crashcore=singbox ;;
5) crashcore=singboxp ;;
*) crashcore=clash ;;
esac
[ "$crashcore" = singbox -o "$crashcore" = singboxp ] && core_new=singbox || core_new=clash
}
switch_core(){ #clash与singbox内核切换
#singbox和clash内核切换时提示是否保留文件
[ "$core_new" != "$core_old" ] && {
[ "$dns_mod" = "redir_host" ] && [ "$core_old" = "clash" ] && setconfig dns_mod mix #singbox自动切换dns
[ "$dns_mod" = "mix" ] && [ "$core_old" = "singbox" ] && setconfig dns_mod fake-ip #singbox自动切换dns
echo -e "\033[33m已从$core_old内核切换至$core_new内核\033[0m"
echo -e "\033[33m二者Geo数据库及yaml/json配置文件不通用\033[0m"
read -p "是否保留相关数据库文件？(1/0) > " res
[ "$res" = '0' ] && [ "$core_old" = "clash" ] && {
rm -rf ${CRASHDIR}/Country.mmdb
rm -rf ${CRASHDIR}/GeoSite.dat
setconfig Country_v
setconfig cn_mini_v
setconfig geosite_v
}
[ "$res" = '0' ] && [ "$core_old" = "singbox" ] && {
rm -rf ${CRASHDIR}/geoip.db
rm -rf ${CRASHDIR}/geosite.db
setconfig geoip_cn_v
setconfig geosite_cn_v
}
}
if [ "$crashcore" = singbox -o "$crashcore" = singboxp ];then
COMMAND='"$TMPDIR/CrashCore run -D $BINDIR -C $TMPDIR/jsons"'
else
COMMAND='"$TMPDIR/CrashCore -d $BINDIR -f $TMPDIR/config.yaml"'
fi
setconfig COMMAND "$COMMAND" ${CRASHDIR}/configs/command.env && source ${CRASHDIR}/configs/command.env
}
getcore(){ #下载内核文件
[ -z "$crashcore" ] && crashcore=singbox
[ -z "$cpucore" ] && getcpucore
[ "$crashcore" = singbox -o "$crashcore" = singboxp ] && core_new=singbox || core_new=clash
#获取在线内核文件
echo -----------------------------------------------
echo 正在在线获取$crashcore核心文件……
if [ -n "$custcorelink" ];then
zip_type=$(echo $custcorelink | grep -oE 'tar.gz$')
[ -z "$zip_type" ] && zip_type=$(echo $custcorelink | grep -oE 'gz$')
if [ -n "$zip_type" ];then
${CRASHDIR}/start.sh webget ${TMPDIR}/core_new.${zip_type} "$custcorelink"
else
echo -e "\033[31m链接不是以.tar.gz或.gz结尾！下载已取消！\033[0m"
exit
fi
else
${CRASHDIR}/start.sh get_bin ${TMPDIR}/core_new.tar.gz bin/${crashcore}/${core_new}-linux-${cpucore}.tar.gz
fi
if [ "$?" = "1" ];then
echo -e "\033[31m核心文件下载失败！\033[0m"
rm -rf ${TMPDIR}/core_new.tar.gz
[ -z "$custcorelink" ] && error_down
else
[ -n "$(pidof CrashCore)" ] && ${CRASHDIR}/start.sh stop #停止内核服务防止内存不足
[ -f ${TMPDIR}/core_new.tar.gz ] && {
mkdir -p ${TMPDIR}/core_tmp
[ "$BINDIR" = "$TMPDIR" ] && rm -rf ${TMPDIR}/CrashCore #小闪存模式防止空间不足
tar -zxf "${TMPDIR}/core_new.tar.gz" ${tar_para} -C ${TMPDIR}/core_tmp/
for file in $(find ${TMPDIR}/core_tmp 2>/dev/null);do
[ -f $file ] && [ -n "$(echo $file | sed 's#.*/##' | grep -iE '(CrashCore|sing|meta|mihomo|clash|premium)')" ] && mv -f $file ${TMPDIR}/core_new
done
rm -rf ${TMPDIR}/core_tmp
}
[ -f ${TMPDIR}/core_new.gz ] && gunzip ${TMPDIR}/core_new.gz && rm -rf ${TMPDIR}/core_new.gz
chmod +x ${TMPDIR}/core_new
[ "$crashcore" = unknow ] && setcoretype
if [ "$crashcore" = singbox -o "$crashcore" = singboxp ];then
core_v=$(${TMPDIR}/core_new version 2>/dev/null | grep version | awk '{print $3}')
else
core_v=$(${TMPDIR}/core_new -v 2>/dev/null | head -n 1 | sed 's/ linux.*//;s/.* //')
fi
if [ -z "$core_v" ];then
echo -e "\033[31m核心文件下载成功但校验失败！请尝试手动指定CPU版本\033[0m"
rm -rf ${TMPDIR}/core_new
rm -rf ${TMPDIR}/core_new.tar.gz
setcpucore
else
echo -e "\033[32m$crashcore核心下载成功！\033[0m"
sleep 1
mv -f ${TMPDIR}/core_new ${TMPDIR}/CrashCore
if [ -f ${TMPDIR}/core_new.tar.gz ];then
mv -f ${TMPDIR}/core_new.tar.gz ${BINDIR}/CrashCore.tar.gz
else
tar -zcf ${BINDIR}/CrashCore.tar.gz ${tar_para} -C ${TMPDIR} CrashCore
fi
setconfig crashcore $crashcore
setconfig core_v $core_v
setconfig custcorelink $custcorelink
switch_core
fi
fi
}
setcustcore(){ #自定义内核
checkcustcore(){
[ "$api_tag" = "latest" ] && api_url=latest || api_url="tags/$api_tag"
#通过githubapi获取内核信息
echo -e "\033[32m正在获取内核文件链接！\033[0m"
${CRASHDIR}/start.sh webget ${TMPDIR}/github_api https://api.github.com/repos/${project}/releases/${api_url}
if [ "$?" = 0 ];then
release_tag=$(cat ${TMPDIR}/github_api | grep '"tag_name":' | awk -F '"' '{print $4}')
release_date=$(cat ${TMPDIR}/github_api | grep '"published_at":' | awk -F '"' '{print $4}')
[ -n "$(echo $cpucore | grep mips)" ] && cpu_type=mips || cpu_type=$cpucore
cat ${TMPDIR}/github_api | grep "browser_download_url" | grep -oE "https://github.com/${project}/releases/download.*linux.*${cpu_type}.*\.gz\"$" | sed 's/"//' > ${TMPDIR}/core.list
rm -rf ${TMPDIR}/github_api
#
if [ -s ${TMPDIR}/core.list ];then
echo -----------------------------------------------
echo -e "内核版本：\033[36m$release_tag\033[0m"
echo -e "发布时间：\033[32m$release_date\033[0m"
echo -----------------------------------------------
echo -e "\033[33m请确认内核信息并选择：\033[0m"
cat ${TMPDIR}/core.list | grep -oE "$release_tag.*" | sed 's|.*/||' | awk '{print " "NR" "$1}'
echo -e " 0 返回上级菜单"
echo -----------------------------------------------
read -p "请输入对应数字 > " num
case "$num" in
0)
setcustcore
;;
[1-9]|[1-9][0-9])
if [ "$num" -le "$(wc -l < ${TMPDIR}/core.list)" ];then
custcorelink=$(sed -n "$num"p ${TMPDIR}/core.list)
getcore
else
errornum
fi
;;
*)
errornum
;;
esac
else
echo -e "\033[31m找不到可用内核，可能是作者没有编译相关CPU架构版本的内核文件！\033[0m"
sleep 1
fi
else
echo -e "\033[31m查找失败，请尽量在服务启动后再使用本功能！\033[0m"
sleep 1
fi
rm -rf ${TMPDIR}/core.list
}
[ -z "$cpucore" ] && getcpucore
echo -----------------------------------------------
echo -e "\033[36m此处内核通常源自互联网采集，此处致谢各位开发者！\033[0m"
echo -e "\033[33m自定义内核未经过完整适配，使用出现问题请自行解决！\033[0m"
echo -e "\033[31m自定义内核已适配定时任务，但不支持小闪存模式！\033[0m"
echo -e "\033[32m如遇到网络错误请先启动ShellCrash服务！\033[0m"
[ -n "$custcore" ] && {
echo -----------------------------------------------
echo -e "当前内核为：\033[36m$custcore\033[0m"
}
echo -----------------------------------------------
echo -e "\033[33m请选择需要使用的核心！\033[0m"
echo -e "1 \033[36mMetaCubeX/mihomo\033[32m@release\033[0m版本内核"
echo -e "2 \033[36mMetaCubeX/mihomo\033[32m@alpha\033[0m版本内核"
echo -e "3 \033[36myaling888/clash\033[32m@release\033[0m版本内核"
echo -e "4 \033[36mSagerNet/sing-box\033[32m@release\033[0m版本内核"
echo -e "5 \033[36mPuerNya/sing-box\033[0m内核(with_gvisor,with_wireguard)"
echo -e "6 \033[36mSagerNet/sing-box\033[32m@1.7.8\033[0m版本内核(不支持rule-set)"
echo -e "7 Premium-2023.08.17内核(已停止维护)"
echo -e "a \033[33m自定义内核链接 \033[0m"
echo -----------------------------------------------
read -p "请输入对应数字 > " num
case "$num" in
1)
project=MetaCubeX/mihomo
api_tag=latest
crashcore=meta
checkcustcore
;;
2)
project=MetaCubeX/mihomo
api_tag=Prerelease-Alpha
crashcore=meta
checkcustcore
;;
3)
project=yaling888/clash
api_tag=latest
crashcore=clashpre
checkcustcore
;;
4)
project=SagerNet/sing-box
api_tag=latest
crashcore=singbox
checkcustcore
;;
5)
project=juewuy/ShellCrash
api_tag=singbox_core_PuerNya
crashcore=singboxp
checkcustcore
;;
6)
project=SagerNet/sing-box
api_tag=v1.7.8
crashcore=singbox
checkcustcore
;;
7)
project=juewuy/ShellCrash
api_tag=clash.premium.latest
crashcore=clashpre
checkcustcore
;;
a)
read -p "请输入自定义内核的链接地址(必须是以.tar.gz或.gz结尾的压缩文件) > " link
[ -n "$link" ] && custcorelink="$link"
crashcore=unknow
getcore
;;
*)
errornum
;;
esac
}
setcore(){ #内核选择菜单
#获取核心及版本信息
[ -z "$crashcore" ] && crashcore="unknow"
[ ! -f ${CRASHDIR}/CrashCore.tar.gz ] && crashcore="未安装核心"
[ "$crashcore" = singbox -o "$crashcore" = singboxp ] && core_old=singbox || core_old=clash
[ -n "$custcorelink" ] && custcore="$(echo $custcorelink | sed 's#.*github.com##; s#/releases/download/#@#; s#-linux.*$##')"
###
echo -----------------------------------------------
[ -z "$cpucore" ] && getcpucore
echo -e "当前内核：\033[42;30m $crashcore \033[47;30m$core_v\033[0m"
echo -e "当前系统处理器架构：\033[32m $cpucore \033[0m"
echo -e "\033[33m请选择需要使用的核心版本！\033[0m"
echo -e "\033[36m如需本地上传，请将二进制文件上传至 /tmp 目录后重新运行crash命令\033[0m"
echo -----------------------------------------------
echo -e "1 \033[43;30m Clash \033[0m： \033[32m占用低\033[0m"
echo -e " >>\033[32m$clash_v \033[33m不支持Tun、Rule-set等\033[0m"
echo -e " 说明文档： \033[36;4mhttps://lancellc.gitbook.io\033[0m"
echo -e "2 \033[43;30m SingBox \033[0m： \033[32m支持全面占用低\033[0m"
echo -e " >>\033[32m$singbox_v \033[33m不支持providers\033[0m"
echo -e " 说明文档： \033[36;4mhttps://sing-box.sagernet.org\033[0m"
echo -e "3 \033[43;30m Meta \033[0m： \033[32m多功能，支持全面\033[0m"
echo -e " >>\033[32m$meta_v \033[33m占用略高，GeoSite可能不兼容华硕固件\033[0m"
echo -e " 说明文档： \033[36;4mhttps://wiki.metacubex.one\033[0m"
echo -e "4 \033[43;30m SingBoxP \033[0m： \033[32m支持ssr、providers、dns并发……\033[0m"
echo -e " >>\033[32m$singboxp_v \033[33mPuerNya分支版本\033[0m"
echo -e " 说明文档： \033[36;4mhttps://sing-boxp.dustinwin.top\033[0m"
echo -----------------------------------------------
echo -e "5 \033[36m自定义内核\033[0m $custcore"
echo -----------------------------------------------
echo "9 手动指定处理器架构"
echo -----------------------------------------------
echo 0 返回上级菜单
read -p "请输入对应数字 > " num
case "$num" in
0)
;;
1)
crashcore=clash
custcorelink=''
getcore
;;
2)
crashcore=singbox
custcorelink=''
getcore
;;
3)
[ -d "/jffs" ] && {
echo -e "\033[31mMeta内核使用的GeoSite.dat数据库在华硕设备存在被系统误删的问题，可能无法使用!\033[0m"
sleep 3
}
crashcore=meta
custcorelink=''
getcore
;;
4)
crashcore=singboxp
custcorelink=''
getcore
;;
5)
setcustcore
setcore
;;
9)
setcpucore
;;
*)
errornum
;;
esac
}
getgeo(){ #下载Geo文件
#生成链接
echo -----------------------------------------------
echo 正在从服务器获取数据库文件…………
${CRASHDIR}/start.sh get_bin ${TMPDIR}/$geoname bin/geodata/$geotype
if [ "$?" = "1" ];then
echo -----------------------------------------------
echo -e "\033[31m文件下载失败！\033[0m"
error_down
else
mv -f ${TMPDIR}/$geoname ${BINDIR}/$geoname
echo -----------------------------------------------
echo -e "\033[32m$geotype数据库文件下载成功！\033[0m"
#全球版GeoIP和精简版CN-IP数据库不共存
[ "$geoname" = "Country.mmdb" ] && {
setconfig Country_v
setconfig cn_mini_v
}
geo_v="$(echo $geotype | awk -F "." '{print $1}')_v"
setconfig $geo_v $GeoIP_v
fi
sleep 1
}
setcustgeo(){ #下载自定义数据库文件
getcustgeo(){
echo -----------------------------------------------
echo 正在获取数据库文件…………
${CRASHDIR}/start.sh webget ${TMPDIR}/$geoname $custgeolink
if [ "$?" = "1" ];then
echo -----------------------------------------------
echo -e "\033[31m文件下载失败！\033[0m"
error_down
else
mv -f ${TMPDIR}/$geoname ${BINDIR}/$geoname
echo -----------------------------------------------
echo -e "\033[32m$geotype数据库文件下载成功！\033[0m"
fi
sleep 1
}
checkcustgeo(){
[ "$api_tag" = "latest" ] && api_url=latest || api_url="tags/$api_tag"
[ ! -s ${TMPDIR}/geo.list ] && {
echo -e "\033[32m正在查找可更新的数据库文件！\033[0m"
${CRASHDIR}/start.sh webget ${TMPDIR}/github_api https://api.github.com/repos/${project}/releases/${api_url}
release_tag=$(cat ${TMPDIR}/github_api | grep '"tag_name":' | awk -F '"' '{print $4}')
cat ${TMPDIR}/github_api | grep "browser_download_url" | grep -oE 'releases/download.*' | grep -oiE 'geosite.*\.dat"$|country.*\.mmdb"$|geosite.*\.db"$|geoip.*\.db"$' | sed 's/"//' > ${TMPDIR}/geo.list
rm -rf ${TMPDIR}/github_api
}
if [ -s ${TMPDIR}/geo.list ];then
echo -e "请选择需要更新的数据库文件："
echo -----------------------------------------------
cat ${TMPDIR}/geo.list | awk '{print " "NR" "$1}'
echo -e " 0 返回上级菜单"
echo -----------------------------------------------
read -p "请输入对应数字 > " num
case "$num" in
0)
;;
[1-99])
if [ "$num" -le "$(wc -l < ${TMPDIR}/geo.list)" ];then
geotype=$(sed -n "$num"p ${TMPDIR}/geo.list)
[ -n "$(echo $geotype | grep -oiE 'GeoSite.*dat')" ] && geoname=GeoSite.dat
[ -n "$(echo $geotype | grep -oiE 'Country.*mmdb')" ] && geoname=Country.mmdb
[ -n "$(echo $geotype | grep -oiE 'geosite.*db')" ] && geoname=geosite.db
[ -n "$(echo $geotype | grep -oiE 'geoip.*db')" ] && geoname=geoip.db
custgeolink=https://github.com/${project}/releases/download/${release_tag}/${geotype}
getcustgeo
checkcustgeo
else
errornum
fi
;;
*)
errornum
;;
esac
else
echo -e "\033[31m查找失败，请尽量在服务启动后再使用本功能！\033[0m"
sleep 1
fi
}
rm -rf ${TMPDIR}/geo.list
echo -----------------------------------------------
echo -e "\033[36m此处数据库均源自互联网采集，此处致谢各位开发者！\033[0m"
echo -e "\033[32m请点击或复制链接前往项目页面查看具体说明！\033[0m"
echo -e "\033[31m自定义数据库不支持定时任务及小闪存模式！\033[0m"
echo -e "\033[33m如遇到网络错误请先启动ShellCrash服务！\033[0m"
echo -e "\033[0m请选择需要更新的数据库项目来源：\033[0m"
echo -----------------------------------------------
echo -e " 1 \033[36;4mhttps://github.com/MetaCubeX/meta-rules-dat\033[0m (Clash及SingBox)"
echo -e " 2 \033[36;4mhttps://github.com/DustinWin/ruleset_geodata\033[0m (仅限Clash)"
echo -e " 3 \033[36;4mhttps://github.com/DustinWin/ruleset_geodata\033[0m (仅限SingBox)"
echo -e " 4 \033[36;4mhttps://github.com/lyc8503/sing-box-rules\033[0m (仅限SingBox)"
echo -e " 5 \033[36;4mhttps://github.com/Loyalsoldier/geoip\033[0m (仅限Clash-GeoIP)"
echo -----------------------------------------------
echo -e " 9 \033[33m自定义数据库链接 \033[0m"
echo -e " 0 返回上级菜单"
read -p "请输入对应数字 > " num
case "$num" in
0)
;;
1)
project=MetaCubeX/meta-rules-dat
api_tag=latest
checkcustgeo
setcustgeo
;;
2)
project=DustinWin/ruleset_geodata
api_tag=clash
checkcustgeo
setcustgeo
;;
3)
project=DustinWin/ruleset_geodata
api_tag=sing-box
checkcustgeo
setcustgeo
;;
4)
project=lyc8503/sing-box-rules
api_tag=latest
checkcustgeo
setcustgeo
;;
5)
project=Loyalsoldier/geoip
api_tag=latest
checkcustgeo
setcustgeo
;;
9)
read -p "请输入自定义数据库的链接地址 > " link
[ -n "$link" ] && custgeolink="$link"
getgeo
setcustgeo
;;
*)
errornum
;;
esac
}
setgeo(){ #数据库选择菜单
source $CFG_PATH > /dev/null
[ -n "$cn_mini_v" ] && geo_type_des=精简版 || geo_type_des=全球版
echo -----------------------------------------------
echo -e "\033[36m请选择需要更新的Geo/CN数据库文件：\033[0m"
echo -e "\033[36m全球版GeoIP和精简版CN-IP数据库不共存\033[0m"
echo -e "\033[36mClash内核和SingBox内核的数据库文件不通用\033[0m"
echo -e "在线数据库最新版本：\033[32m$GeoIP_v\033[0m"
echo -----------------------------------------------
[ "$cn_ip_route" = "已开启" ] && {
echo -e " 1 CN-IP绕过文件(约0.1mb) \033[33m$china_ip_list_v\033[0m"
echo -e " 2 CN-IPV6绕过文件(约30kb) \033[33m$china_ipv6_list_v\033[0m"
}
[ -z "$(echo "$crashcore" | grep sing)" ] && {
echo -e " 3 Clash全球版GeoIP数据库(约6mb) \033[33m$Country_v\033[0m"
echo -e " 4 Clash精简版GeoIP_cn数据库(约0.1mb) \033[33m$cn_mini_v\033[0m"
echo -e " 5 Meta完整版GeoSite数据库(约5mb) \033[33m$geosite_v\033[0m"
}
[ -n "$(echo "$crashcore" | grep sing)" ] && {
echo -e " 6 SingBox精简版GeoIP_cn数据库(约0.3mb) \033[33m$geoip_cn_v\033[0m"
echo -e " 7 SingBox精简版GeoSite数据库(约0.8mb) \033[33m$geosite_cn_v\033[0m"
echo -e " 8 Rule_Set_geoip_cn数据库(约0.1mb) \033[33m$srs_geoip_cn_v\033[0m"
echo -e " 9 Rule_Set_geosite_cn数据库(约0.1mb) \033[33m$srs_geosite_cn_v\033[0m"
}
echo -----------------------------------------------
echo -e " a \033[32m自定义数据库文件\033[0m"
echo -e " b \033[31m清理数据库文件\033[0m"
echo " 0 返回上级菜单"
echo -----------------------------------------------
read -p "请输入对应数字 > " num
case "$num" in
0)
;;
1)
geotype=china_ip_list.txt
geoname=cn_ip.txt
getgeo
setgeo
;;
2)
geotype=china_ipv6_list.txt
geoname=cn_ipv6.txt
getgeo
setgeo
;;
3)
geotype=Country.mmdb
geoname=Country.mmdb
getgeo
setgeo
;;
4)
geotype=cn_mini.mmdb
geoname=Country.mmdb
getgeo
setgeo
;;
5)
geotype=geosite.dat
geoname=GeoSite.dat
getgeo
setgeo
;;
6)
geotype=geoip_cn.db
geoname=geoip.db
getgeo
setgeo
;;
7)
geotype=geosite_cn.db
geoname=geosite.db
getgeo
setgeo
;;
8)
geotype=srs_geoip_cn.srs
geoname=geoip-cn.srs
getgeo
setgeo
;;
9)
geotype=srs_geosite_cn.srs
geoname=geosite-cn.srs
getgeo
setgeo
;;
a)
setcustgeo
setgeo
;;
b)
echo -----------------------------------------------
echo -e "\033[33m这将清理$CRASHDIR目录下所有数据库文件！\033[0m"
echo -e "\033[36m清理后启动服务即可自动下载所需文件~\033[0m"
echo -----------------------------------------------
read -p "确认清理？[1/0] > " res
[ "$res" = '1' ] && {
for file in cn_ip.txt cn_ipv6.txt Country.mmdb GeoSite.dat geoip.db geosite.db ;do
rm -rf $CRASHDIR/$file
done
for var in Country_v cn_mini_v china_ip_list_v china_ipv6_list_v geosite_v geoip_cn_v geosite_cn_v ;do
setconfig $var
done
rm -rf $CRASHDIR/*.srs
echo -e "\033[33m所有数据库文件均已清理！\033[0m"
sleep 1
}
setgeo
;;
*)
errornum
;;
esac
}
getdb(){ #下载Dashboard文件
dblink="${update_url}/"
echo -----------------------------------------------
echo 正在连接服务器获取安装文件…………
${CRASHDIR}/start.sh get_bin ${TMPDIR}/clashdb.tar.gz bin/dashboard/${db_type}.tar.gz
if [ "$?" = "1" ];then
echo -----------------------------------------------
echo -e "\033[31m文件下载失败！\033[0m"
echo -----------------------------------------------
error_down
setdb
else
echo -e "\033[33m下载成功，正在解压文件！\033[0m"
mkdir -p $dbdir > /dev/null
tar -zxf "${TMPDIR}/clashdb.tar.gz" ${tar_para} -C $dbdir > /dev/null
[ $? -ne 0 ] && echo "文件解压失败！" && rm -rf ${TMPDIR}/clashfm.tar.gz && exit 1
#修改默认host和端口
if [ "$db_type" = "clashdb" -o "$db_type" = "meta_db" -o "$db_type" = "meta_xd" ];then
sed -i "s/127.0.0.1/${host}/g" $dbdir/assets/*.js
sed -i "s/9090/${db_port}/g" $dbdir/assets/*.js
else
sed -i "s/127.0.0.1:9090/${host}:${db_port}/g" $dbdir/*.html
#sed -i "s/7892/${db_port}/g" $dbdir/app*.js
fi
#写入配置文件
setconfig hostdir \'$hostdir\'
echo -----------------------------------------------
echo -e "\033[32m面板安装成功！\033[0m"
rm -rf ${TMPDIR}/clashdb.tar.gz
fi
sleep 1
}
setdb(){
dbdir(){
if [ -f /www/clash/CNAME -o -f ${CRASHDIR}/ui/CNAME ];then
echo -----------------------------------------------
echo -e "\033[31m检测到您已经安装过本地面板了！\033[0m"
echo -----------------------------------------------
read -p "是否覆盖安装？[1/0] > " res
if [ "$res" = 1 ]; then
rm -rf ${BINDIR}/ui
[ -f /www/clash/CNAME ] && rm -rf /www/clash && dbdir=/www/clash
[ -f ${CRASHDIR}/ui/CNAME ] && rm -rf ${CRASHDIR}/ui && dbdir=${CRASHDIR}/ui
getdb
else
setdb
echo -e "\033[33m安装已取消！\033[0m"
fi
elif [ -w /www -a -n "$(pidof nginx)" ];then
echo -----------------------------------------------
echo -e "请选择面板\033[33m安装目录：\033[0m"
echo -----------------------------------------------
echo -e " 1 在${CRASHDIR}/ui目录安装"
echo -e " 2 在/www/clash目录安装"
echo -----------------------------------------------
echo " 0 返回上级菜单"
read -p "请输入对应数字 > " num
if [ "$num" = '1' ]; then
dbdir=${CRASHDIR}/ui
hostdir=":$db_port/ui"
getdb
elif [ "$num" = '2' ]; then
dbdir=/www/clash
hostdir='/clash'
getdb
else
setdb
echo -e "\033[33m安装已取消！\033[0m"
fi
else
dbdir=${CRASHDIR}/ui
hostdir=":$db_port/ui"
getdb
fi
}
echo -----------------------------------------------
echo -e "\033[36m安装本地版dashboard管理面板\033[0m"
echo -e "\033[32m打开管理面板的速度更快且更稳定\033[0m"
echo -----------------------------------------------
echo -e "请选择面板\033[33m安装类型：\033[0m"
echo -----------------------------------------------
echo -e " 1 安装\033[32mYacd面板\033[0m(约1.1mb)"
echo -e " 2 安装\033[32mYacd-Meta魔改面板\033[0m(约1.5mb)"
echo -e " 3 安装\033[32mMetaXD面板\033[0m(约1.5mb)"
[ "$crashcore" != singbox ] && {
echo -e " 4 安装\033[32m基础面板\033[0m(约500kb)"
echo -e " 5 安装\033[32mMeta基础面板\033[0m(约800kb)"
}
echo -e " 9 卸载\033[33m本地面板\033[0m"
echo " 0 返回上级菜单"
read -p "请输入对应数字 > " num
case "$num" in
0) ;;
1)
db_type=yacd
dbdir
;;
2)
db_type=meta_yacd
dbdir
;;
3)
db_type=meta_xd
dbdir
;;
4)
db_type=clashdb
dbdir
;;
5)
db_type=meta_db
dbdir
;;
9)
read -p "确认卸载本地面板？(1/0) > " res
if [ "$res" = 1 ];then
rm -rf /www/clash
rm -rf ${CRASHDIR}/ui
rm -rf ${BINDIR}/ui
echo -----------------------------------------------
echo -e "\033[31m面板已经卸载！\033[0m"
sleep 1
fi
;;
*)
errornum
;;
esac
}
getcrt(){ #下载根证书文件
echo -----------------------------------------------
echo 正在连接服务器获取安装文件…………
${CRASHDIR}/start.sh get_bin ${TMPDIR}/ca-certificates.crt bin/fix/ca-certificates.crt
if [ "$?" = "1" ];then
echo -----------------------------------------------
echo -e "\033[31m文件下载失败！\033[0m"
error_down
else
echo -----------------------------------------------
[ "$systype" = 'mi_snapshot' ] && cp -f ${TMPDIR}/ca-certificates.crt $CRASHDIR/tools #镜像化设备特殊处理
[ -f $openssldir/certs ] && rm -rf $openssldir/certs #如果certs不是目录而是文件则删除并创建目录
mkdir -p $openssldir/certs
mv -f ${TMPDIR}/ca-certificates.crt $crtdir
${CRASHDIR}/start.sh webget /dev/null https://baidu.com echooff rediron skipceroff
if [ "$?" = "1" ];then
export CURL_CA_BUNDLE=$crtdir
echo "export CURL_CA_BUNDLE=$crtdir" >> /etc/profile
fi
echo -e "\033[32m证书安装成功！\033[0m"
sleep 1
fi
}
setcrt(){
openssldir="$(openssl version -d 2>&1 | awk -F '"' '{print $2}')"
if [ -d "$openssldir/certs/" ];then
crtdir="$openssldir/certs/ca-certificates.crt"
else
crtdir="/etc/ssl/certs/ca-certificates.crt"
fi
if [ -n "$openssldir" ];then
echo -----------------------------------------------
echo -e "\033[36m安装/更新本地根证书文件(ca-certificates.crt)\033[0m"
echo -e "\033[33m用于解决证书校验错误，x509报错等问题\033[0m"
echo -e "\033[31m无上述问题的设备请勿使用！\033[0m"
echo -----------------------------------------------
[ -f "$crtdir" ] && echo -e "\033[33m检测到系统已经存在根证书文件($crtdir)了！\033[0m\n-----------------------------------------------"
read -p "是否覆盖更新？(1/0) > " res
if [ -z "$res" ];then
errornum
elif [ "$res" = '0' ]; then
i=
elif [ "$res" = '1' ]; then
getcrt
else
errornum
fi
else
echo -----------------------------------------------
echo -e "\033[33m设备可能尚未安装openssl，无法安装证书文件！\033[0m"
sleep 1
fi
}
#安装源
setserver(){
[ -z "$release_type" ] && release_name=未指定
[ -n "$release_type" ] && release_name=${release_type}'(回退)'
[ "$release_type" = stable ] && release_name=稳定版
[ "$release_type" = master ] && release_name=公测版
[ "$release_type" = dev ] && release_name=开发版
[ -n "$url_id" ] && url_name=$(grep "$url_id" ${CRASHDIR}/configs/servers.list 2>/dev/null | awk '{print $2}') || url_name=$update_url
saveserver(){
#写入配置文件
setconfig update_url \'$update_url\'
setconfig url_id $url_id
setconfig release_type $release_type
echo -----------------------------------------------
echo -e "\033[32m源地址切换成功！\033[0m"
}
echo -----------------------------------------------
echo -e "\033[30;47m切换ShellCrash版本及更新源地址\033[0m"
echo -e "当前版本：\033[4;33m$release_name\033[0m 当前源：\033[4;32m$url_name\033[0m"
echo -----------------------------------------------
grep -E "^1|$release_name" ${CRASHDIR}/configs/servers.list | awk '{print " "NR" "$2}'
echo -----------------------------------------------
echo -e " a 切换至\033[32m稳定版-stable\033[0m"
echo -e " b 切换至\033[36m公测版-master\033[0m"
echo -e " c 切换至\033[33m开发版-dev\033[0m"
echo -----------------------------------------------
echo -e " d 自定义源地址(用于本地源或自建源)"
echo -e " e \033[31m版本回退\033[0m"
echo -e " 0 返回上级菜单"
echo -----------------------------------------------
read -p "请输入对应字母或数字 > " num
case $num in
0)
checkupdate=false
;;
[1-99])
url_id_new=$(grep -E "^1|$release_name" ${CRASHDIR}/configs/servers.list | sed -n ""$num"p" | awk '{print $1}')
if [ -z "$url_id_new" ];then
errornum
sleep 1
setserver
elif [ "$url_id_new" -ge 200 ];then
update_url=$(grep -E "^1|$release_name" ${CRASHDIR}/configs/servers.list | sed -n ""$num"p" | awk '{print $3}')
url_id=''
saveserver
else
url_id=$url_id_new
update_url=''
saveserver
fi
unset url_id_new
;;
a)
release_type=stable
[ -z "$url_id" ] && url_id=101
saveserver
setserver
;;
b)
release_type=master
[ -z "$url_id" ] && url_id=101
saveserver
setserver
;;
c)
echo -----------------------------------------------
echo -e "\033[33m开发版未经过妥善测试，可能依然存在大量bug！！！\033[0m"
echo -e "\033[36m如果你没有足够的耐心或者测试经验，切勿使用此版本！\033[0m"
echo -e "请务必加入我们的讨论组：\033[32;4mhttps://t.me/ShellClash\033[0m"
read -p "是否依然切换到开发版？(1/0) > " res
if [ "$res" = 1 ];then
release_type=dev
[ -z "$url_id" ] && url_id=101
saveserver
fi
setserver
;;
d)
echo -----------------------------------------------
read -p "请输入个人源路径 > " update_url
if [ -z "$update_url" ];then
echo -----------------------------------------------
echo -e "\033[31m取消输入，返回上级菜单\033[0m"
else
url_id=''
release_type=''
saveserver
fi
;;
e)
echo -----------------------------------------------
if [ -n "$url_id" ] && [ "$url_id" -lt 200 ];then
echo -ne "\033[32m正在获取版本信息！\033[0m\r"
${CRASHDIR}/start.sh get_bin ${TMPDIR}/release_version bin/release_version
if [ "$?" = "0" ];then
echo -e "\033[31m请选择想要回退至的稳定版版本：\033[0m"
cat ${TMPDIR}/release_version | awk '{print " "NR" "$1}'
echo -e " 0 返回上级菜单"
read -p "请输入对应数字 > " num
if [ -z "$num" -o "$num" = 0 ]; then
setserver
elif [ $num -le $(cat ${TMPDIR}/release_version 2>/dev/null | awk 'END{print NR}') ]; then
release_type=$(cat ${TMPDIR}/release_version | awk '{print $1}' | sed -n "$num"p)
update_url=''
saveserver
else
echo -----------------------------------------------
errornum
sleep 1
setserver
fi
else
echo -----------------------------------------------
echo -e "\033[31m版本回退信息获取失败，请尝试更换其他安装源！\033[0m"
sleep 1
setserver
fi
rm -rf ${TMPDIR}/release_version
else
echo -e "\033[31m当前源不支持版本回退，请尝试更换其他安装源！\033[0m"
sleep 1
setserver
fi
;;
*)
errornum
;;
esac
}
#检查更新
checkupdate(){
${CRASHDIR}/start.sh get_bin ${TMPDIR}/version_new bin/version echooff
[ "$?" = "0" ] && version_new=$(cat ${TMPDIR}/version_new | grep -oE 'versionsh=.*' | awk -F'=' '{ print $2 }')
if [ -n "$version_new" ];then
source ${TMPDIR}/version_new 2>/dev/null
else
echo -e "\033[31m检查更新失败！请尝试切换其他安装源！\033[0m"
setserver
[ "$checkupdate" = false ] || checkupdate
fi
rm -rf ${TMPDIR}/version_new
}
update(){
echo -----------------------------------------------
echo -ne "\033[32m正在检查更新！\033[0m\r"
checkupdate
[ -z "$core_v" ] && core_v=$crashcore
core_v_new=$(eval echo \$${crashcore}_v)
echo -e "\033[30;47m欢迎使用更新功能：\033[0m"
echo -----------------------------------------------
echo -e "当前目录(\033[32m${CRASHDIR}\033[0m)剩余空间：\033[36m$(dir_avail ${CRASHDIR} -h)\033[0m"
[ "$(dir_avail ${CRASHDIR})" -le 5120 ] && [ "$CRASHDIR" = "$BINDIR" ] && {
echo -e "\033[33m当前目录剩余空间较低，建议开启小闪存模式！\033[0m"
sleep 1
}
echo -----------------------------------------------
echo -e " 1 更新\033[36m管理脚本 \033[33m$versionsh_l\033[0m > \033[32m$version_new \033[36m$release_type\033[0m"
echo -e " 2 切换\033[33m内核文件 \033[33m$core_v\033[0m > \033[32m$core_v_new\033[0m"
echo -e " 3 更新\033[32m数据库文件\033[0m > \033[32m$GeoIP_v\033[0m"
echo -e " 4 安装本地\033[35mDashboard\033[0m面板"
echo -e " 5 安装/更新本地\033[33m根证书文件\033[0m"
echo -e " 6 查看\033[32mPAC\033[0m自动代理配置"
echo -----------------------------------------------
echo -e " 7 切换\033[36m安装源\033[0m及\033[36m安装版本\033[0m"
echo -e " 8 \033[32m配置自动更新\033[0m"
echo -e " 9 \033[31m卸载ShellCrash\033[0m"
echo -----------------------------------------------
echo -e "99 \033[36m鸣谢！\033[0m"
echo -----------------------------------------------
echo -e " 0 返回上级菜单"
echo -----------------------------------------------
read -p "请输入对应数字 > " num
if [ -z "$num" ]; then
errornum
elif [ "$num" = 0 ]; then
i=
elif [ "$num" = 1 ]; then
setscripts
elif [ "$num" = 2 ]; then
setcore
update
elif [ "$num" = 3 ]; then
setgeo
update
elif [ "$num" = 4 ]; then
setdb
update
elif [ "$num" = 5 ]; then
setcrt
update
elif [ "$num" = 6 ]; then
echo -----------------------------------------------
echo -e "PAC配置链接为：\033[30;47m http://$host:$db_port/ui/pac \033[0m"
echo -e "PAC的使用教程请参考：\033[4;32mhttps://juewuy.github.io/ehRUeewcv\033[0m"
sleep 2
update
elif [ "$num" = 7 ]; then
setserver
update
elif [ "$num" = 8 ]; then
source ${CRASHDIR}/task/task.sh && task_add
update
elif [ "$num" = 9 ]; then
uninstall
exit
elif [ "$num" = 99 ]; then
echo -----------------------------------------------
echo -e "感谢：\033[32mClash项目 \033[0m作者\033[36m Dreamacro\033[0m"
echo -e "感谢：\033[32msing-box项目 \033[0m作者\033[36m SagerNet\033[0m 项目地址：\033[32mhttps://github.com/SagerNet/sing-box\033[0m"
echo -e "感谢：\033[32mMetaCubeX项目 \033[0m作者\033[36m MetaCubeX\033[0m 项目地址：\033[32mhttps://github.com/MetaCubeX\033[0m"
echo -e "感谢：\033[32mYACD面板项目 \033[0m作者\033[36m haishanh\033[0m 项目地址：\033[32mhttps://github.com/haishanh/yacd\033[0m"
echo -e "感谢：\033[32mSubconverter \033[0m作者\033[36m tindy2013\033[0m 项目地址：\033[32mhttps://github.com/tindy2013/subconverter\033[0m"
echo -e "感谢：\033[32msing-box分支项目 \033[0m作者\033[36m PuerNya\033[0m 项目地址：\033[32mhttps://github.com/PuerNya/sing-box\033[0m"
echo -e "感谢：\033[32mDustinWin相关项目 \033[0m作者\033[36m DustinWin\033[0m 作者地址：\033[32mhttps://github.com/DustinWin\033[0m"
echo -----------------------------------------------
echo -e "特别感谢：\033[36m所有帮助及赞助过此项目的同仁们！\033[0m"
echo -----------------------------------------------
sleep 2
update
else
errornum
fi
}
#新手引导
userguide(){
forwhat(){
echo -----------------------------------------------
echo -e "\033[30;46m 欢迎使用ShellCrash新手引导！ \033[0m"
echo -----------------------------------------------
echo -e "\033[33m请先选择你的使用环境： \033[0m"
echo -e "\033[0m(你之后依然可以在设置中更改各种配置)\033[0m"
echo -----------------------------------------------
echo -e " 1 \033[32m路由设备配置局域网透明代理\033[0m"
echo -e " 2 \033[36mLinux设备仅配置本机代理\033[0m"
[ -f "$CFG_PATH.bak" ] && echo -e " 3 \033[33m还原之前备份的设置\033[0m"
echo -----------------------------------------------
read -p "请输入对应数字 > " num
if [ -z "$num" ] || [ "$num" -gt 4 ];then
errornum
forwhat
elif [ "$num" = 1 ];then
#设置运行模式
redir_mod="Redir模式"
setconfig redir_mod "$redir_mod"
#自动识别IPV6
[ -n "$(ip a 2>&1 | grep -w 'inet6' | grep -E 'global' | sed 's/.*inet6.//g' | sed 's/scope.*$//g')" ] && {
setconfig ipv6_redir 已开启
setconfig ipv6_support 已开启
setconfig ipv6_dns 已开启
}
#设置开机启动
[ -f /etc/rc.common -a "$(cat /proc/1/comm)" = "procd" ] && /etc/init.d/shellcrash enable
ckcmd systemctl && [ "$(cat /proc/1/comm)" = "systemd" ] && systemctl enable shellcrash.service > /dev/null 2>&1
rm -rf ${CRASHDIR}/.dis_startup
autostart=enable
#检测IP转发
if [ "$(cat /proc/sys/net/ipv4/ip_forward)" = "0" ];then
echo -----------------------------------------------
echo -e "\033[33m检测到你的设备尚未开启ip转发，局域网设备将无法正常连接网络，是否立即开启？\033[0m"
read -p "是否开启？(1/0) > " res
[ "$res" = 1 ] && {
echo 'net.ipv4.ip_forward = 1' >> /etc/sysctl.conf
sysctl -w net.ipv4.ip_forward=1
} && echo "已成功开启ipv4转发，如未正常开启，请手动重启设备！" || echo "开启失败！请自行谷歌查找当前设备的开启方法！"
fi
elif [ "$num" = 2 ];then
setconfig redir_mod "Redir模式"
setconfig crashcore "clash"
setconfig common_ports "未开启"
setconfig firewall_area '2'
elif [ "$num" = 3 ];then
mv -f $CFG_PATH.bak $CFG_PATH
echo -e "\033[32m脚本设置已还原！\033[0m"
echo -e "\033[33m请重新启动脚本！\033[0m"
exit 0
fi
}
forwhat
#检测小内存模式
dir_size=$(dir_avail ${CRASHDIR})
if [ "$dir_size" -lt 10240 ];then
echo -----------------------------------------------
echo -e "\033[33m检测到你的安装目录空间不足10M，是否开启小闪存模式？\033[0m"
echo -e "\033[0m开启后核心及数据库文件将被下载到内存中，这将占用一部分内存空间\033[0m"
echo -e "\033[0m每次开机后首次运行服务时都会自动的重新下载相关文件\033[0m"
echo -----------------------------------------------
read -p "是否开启？(1/0) > " res
[ "$res" = 1 ] && {
BINDIR=/tmp/ShellCrash
setconfig BINDIR /tmp/ShellCrash ${CRASHDIR}/configs/command.env
}
fi
#检测及下载根证书
openssldir="$(openssl version -d 2>&1 | awk -F '"' '{print $2}')"
[ ! -d "$openssldir/certs" ] && openssldir=/etc/ssl
if [ -d $openssldir/certs -a ! -f $openssldir/certs/ca-certificates.crt ];then
echo -----------------------------------------------
echo -e "\033[33m当前设备未找到根证书文件\033[0m"
echo -----------------------------------------------
read -p "是否下载并安装根证书？(1/0) > " res
[ "$res" = 1 ] && checkupdate && getcrt
fi
#设置加密DNS
if [ -s $openssldir/certs/ca-certificates.crt ];then
dns_nameserver='https://223.5.5.5/dns-query, https://doh.pub/dns-query, tls://dns.rubyfish.cn:853'
dns_fallback='https://1.0.0.1/dns-query, https://8.8.4.4/dns-query, https://doh.opendns.com/dns-query'
setconfig dns_nameserver \'"$dns_nameserver"\'
setconfig dns_fallback \'"$dns_fallback"\'
fi
#开启公网访问
sethost(){
read -p "请输入你的公网IP地址 > " host
echo $host | grep -oE '[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}'
if [ -z "$host" ];then
echo -e "\033[31m请输入正确的IP地址！\033[0m"
sethost
fi
}
if ckcmd systemctl;then
echo -----------------------------------------------
echo -e "\033[32m是否开启公网访问Dashboard面板及socks服务？\033[0m"
echo -e "注意当前设备必须有公网IP才能从公网正常访问"
echo -e "\033[31m此功能会增加暴露风险请谨慎使用！\033[0m"
echo -e "vps设备可能还需要额外在服务商后台开启相关端口"
read -p "现在开启？(1/0) > " res
if [ "$res" = 1 ];then
read -p "请先设置面板访问秘钥 > " secret
read -p "请先修改Socks服务端口(1-65535) > " mix_port
read -p "请先设置Socks服务密码(账号默认为crash) > " sec
[ -z "$sec" ] && authentication=crash:$sec
host=$(curl ip.sb 2>/dev/null | grep -oE '[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}')
if [ -z "$host" ];then
sethost
fi
public_support=已开启
setconfig secret $secret
setconfig mix_port $mix_port
setconfig host $host
setconfig public_support $public_support
setconfig authentication \'$authentication\'
fi
fi
#启用推荐的自动任务配置
source ${CRASHDIR}/task/task.sh && task_recom
#小米设备软固化
if [ "$systype" = "mi_snapshot" ];then
echo -----------------------------------------------
echo -e "\033[33m检测到为小米路由设备，启用软固化可防止路由升级后丢失SSH\033[0m"
read -p "是否启用软固化功能？(1/0) > " res
[ "$res" = 1 ] && autoSSH
fi
#提示导入订阅或者配置文件
[ ! -s $CRASHDIR/yamls/config.yaml -a ! -s $CRASHDIR/jsons/config.json ] && {
echo -----------------------------------------------
echo -e "\033[32m是否导入配置文件？\033[0m(这是运行前的最后一步)"
echo -e "\033[0m你必须拥有一份配置文件才能运行服务！\033[0m"
echo -----------------------------------------------
read -p "现在开始导入？(1/0) > " res
[ "$res" = 1 ] && inuserguide=1 && {
if [ -f "$CRASHDIR"/v2b_api.sh ];then
. "$CRASHDIR"/v2b_api.sh
else
set_core_config
fi
set_core_config
inuserguide=""
}
}
#回到主界面
echo -----------------------------------------------
echo -e "\033[36m很好！现在只需要执行启动就可以愉快的使用了！\033[0m"
echo -----------------------------------------------
read -p "立即启动服务？(1/0) > " res
[ "$res" = 1 ] && start_core && sleep 2
main_menu
}
#测试菜单
debug(){
[ "$crashcore" = singbox -o "$crashcore" = singboxp ] && config_tmp=$TMPDIR/jsons || config_tmp=$TMPDIR/config.yaml
echo -----------------------------------------------
echo -e "\033[36m注意：Debug运行均会停止原本的内核服务\033[0m"
echo -e "后台运行日志地址：\033[32m$TMPDIR/debug.log\033[0m"
echo -e "如长时间运行后台监测，日志等级推荐error！防止文件过大！"
echo -e "你也可以通过：\033[33mcrash -s debug 'warning'\033[0m 命令使用其他日志等级"
echo -----------------------------------------------
echo -e " 1 仅测试\033[32m$config_tmp\033[0m配置文件可用性"
echo -e " 2 前台运行\033[32m$config_tmp\033[0m配置文件,不配置防火墙劫持(\033[33m使用Ctrl+C手动停止\033[0m)"
echo -e " 3 后台运行完整启动流程,并配置防火墙劫持,日志等级:\033[31merror\033[0m"
echo -e " 4 后台运行完整启动流程,并配置防火墙劫持,日志等级:\033[32minfo\033[0m"
echo -e " 5 后台运行完整启动流程,并配置防火墙劫持,日志等级:\033[33mdebug\033[0m"
echo -e " 6 后台运行完整启动流程,并配置防火墙劫持,且将错误日志打印到闪存：\033[32m$CRASHDIR/debug.log\033[0m"
echo -----------------------------------------------
echo -e " 8 后台运行完整启动流程,输出执行错误并查找上下文,之后关闭进程"
[ -s $TMPDIR/jsons/inbounds.json ] && echo -e " 9 将\033[32m$config_tmp\033[0m下json文件合并为$TMPDIR/debug.json"
echo -----------------------------------------------
echo " 0 返回上级目录！"
read -p "请输入对应数字 > " num
case "$num" in
0) ;;
1)
$CRASHDIR/start.sh stop
$CRASHDIR/start.sh bfstart
if [ "$crashcore" = singbox -o "$crashcore" = singboxp ] ;then
$TMPDIR/CrashCore run -D $BINDIR -C $TMPDIR/jsons &
{ sleep 4 ; kill $! >/dev/null 2>&1 & }
wait
else
${TMPDIR}/CrashCore -t -d ${BINDIR} -f ${TMPDIR}/config.yaml
fi
rm -rf ${TMPDIR}/CrashCore
echo -----------------------------------------------
exit
;;
2)
$CRASHDIR/start.sh stop
$CRASHDIR/start.sh bfstart
$COMMAND
rm -rf ${TMPDIR}/CrashCore
echo -----------------------------------------------
exit
;;
3)
$CRASHDIR/start.sh debug error
main_menu
;;
4)
$CRASHDIR/start.sh debug info
main_menu
;;
5)
$CRASHDIR/start.sh debug debug
main_menu
;;
6)
echo -e "频繁写入闪存会导致闪存寿命降低，如非遇到会导致设备死机或重启的bug，请勿使用此功能！"
read -p "是否继续？(1/0) > " res
[ "$res" = 1 ] && $CRASHDIR/start.sh debug debug flash
main_menu
;;
8)
$0 -d
main_menu
;;
9)
${CRASHDIR}/start.sh core_check && $TMPDIR/CrashCore merge $TMPDIR/debug.json -C $TMPDIR/jsons && echo -e "\033[32m合并成功！\033[0m"
rm -rf ${TMPDIR}/CrashCore
main_menu
;;
*)
errornum
;;
esac
}
testcommand(){
[ "$crashcore" = singbox -o "$crashcore" = singboxp ] && config_path=${JSONSDIR}/config.json || config_path=${YAMLSDIR}/config.yaml
echo -----------------------------------------------
echo -e "\033[30;47m这里是测试命令菜单\033[0m"
echo -e "\033[33m如遇问题尽量运行相应命令后截图提交issue或TG讨论组\033[0m"
echo -----------------------------------------------
echo " 1 Debug模式运行内核"
echo " 2 查看系统DNS端口(:53)占用 "
echo " 3 测试ssl加密(aes-128-gcm)跑分"
echo " 4 查看ShellCrash相关路由规则"
echo " 5 查看内核配置文件前40行"
echo " 6 测试代理服务器连通性(google.tw)"
echo -----------------------------------------------
echo " 0 返回上级目录！"
read -p "请输入对应数字 > " num
if [ -z "$num" ]; then
errornum
main_menu
elif [ "$num" = 0 ]; then
main_menu
elif [ "$num" = 1 ]; then
debug
testcommand
elif [ "$num" = 2 ]; then
echo -----------------------------------------------
netstat -ntulp |grep 53
echo -----------------------------------------------
echo -e "可以使用\033[44m netstat -ntulp |grep xxx \033[0m来查询任意(xxx)端口"
exit;
elif [ "$num" = 3 ]; then
echo -----------------------------------------------
openssl speed -multi 4 -evp aes-128-gcm
echo -----------------------------------------------
exit;
elif [ "$num" = 4 ]; then
if [ "$firewall_mod" = "nftables" ];then
nft list table inet shellcrash
else
[ "$firewall_area" = 1 -o "$firewall_area" = 3 -o "$firewall_area" = 5 -o "$vm_redir" = "已开启" ] && {
echo ----------------Redir+DNS---------------------
iptables -t nat -L PREROUTING --line-numbers
iptables -t nat -L shellcrash_dns --line-numbers
[ -n "$(echo $redir_mod | grep -E 'Redir模式|混合模式')" ] && iptables -t nat -L shellcrash --line-numbers
[ -n "$(echo $redir_mod | grep -E 'Tproxy模式|混合模式|Tun模式')" ] && {
echo ----------------Tun/Tproxy-------------------
iptables -t mangle -L PREROUTING --line-numbers
iptables -t mangle -L shellcrash_mark --line-numbers
}
}
[ "$firewall_area" = 2 -o "$firewall_area" = 3 ] && {
echo -------------OUTPUT-Redir+DNS----------------
iptables -t nat -L OUTPUT --line-numbers
iptables -t nat -L shellcrash_dns_out --line-numbers
[ -n "$(echo $redir_mod | grep -E 'Redir模式|混合模式')" ] && iptables -t nat -L shellcrash_out --line-numbers
[ -n "$(echo $redir_mod | grep -E 'Tproxy模式|混合模式|Tun模式')" ] && {
echo ------------OUTPUT-Tun/Tproxy---------------
iptables -t mangle -L OUTPUT --line-numbers
iptables -t mangle -L shellcrash_mark_out --line-numbers
}
}
[ "$ipv6_redir" = "已开启" ] && {
[ "$firewall_area" = 1 -o "$firewall_area" = 3 ] && {
ip6tables -t nat -L >/dev/null 2>&1 && {
echo -------------IPV6-Redir+DNS-------------------
ip6tables -t nat -L PREROUTING --line-numbers
ip6tables -t nat -L shellcrashv6_dns --line-numbers
[ -n "$(echo $redir_mod | grep -E 'Redir模式|混合模式')" ] && ip6tables -t nat -L shellcrashv6 --line-numbers
}
[ -n "$(echo $redir_mod | grep -E 'Tproxy模式|混合模式|Tun模式')" ] && {
echo -------------IPV6-Tun/Tproxy------------------
ip6tables -t mangle -L PREROUTING --line-numbers
ip6tables -t mangle -L shellcrashv6_mark --line-numbers
}
}
}
[ "$vm_redir" = "已开启" ] && {
echo -------------vm-Redir-------------------
iptables -t nat -L shellcrash_vm --line-numbers
iptables -t nat -L shellcrash_vm_dns --line-numbers
}
fi
exit;
elif [ "$num" = 5 ]; then
echo -----------------------------------------------
sed -n '1,40p' ${config_path}
echo -----------------------------------------------
exit;
elif [ "$num" = 6 ]; then
echo "注意：依赖curl(不支持wget)，且测试结果不保证一定准确！"
delay=`curl -kx ${authentication}@127.0.0.1:$mix_port -o /dev/null -s -w '%{time_starttransfer}' 'https://google.tw' & { sleep 3 ; kill $! >/dev/null 2>&1 & }` > /dev/null 2>&1
delay=`echo |awk "{print $delay*1000}"` > /dev/null 2>&1
echo -----------------------------------------------
if [ `echo ${#delay}` -gt 1 ];then
echo -e "\033[32m连接成功！响应时间为："$delay" ms\033[0m"
else
echo -e "\033[31m连接超时！请重试或检查节点配置！\033[0m"
fi
main_menu
else
errornum
main_menu
fi
}
case "$1" in
*)
$1
;;
esac
Reference in New Issue View Git Blame Copy Permalink