#!/bin/sh
# Copyright (C) Juewuy

echo "***********************************************"
echo "**                 欢迎使用                  **"
echo "**             Clash for Miwifi              **"
echo "**                             by  Juewuy    **"
echo "***********************************************"

getconfig(){
#版本号
clashfm=0.8.0
#更新服务器地址
update_url="https://juewuy.xyz/clash"
#文件路径
ccfg=$clashdir/mark
yaml=$clashdir/config.yaml
#检查标识文件
if [ ! -f "$ccfg" ]; then
echo mark文件不存在，正在创建！
cat >$ccfg<<EOF
#标识clash运行状态的文件，不明勿动！
EOF
fi
source $ccfg
#获取自启状态
#if [ $auto_start = true ] > /dev/null 2>&1; then 
if [ -f /etc/rc.d/*clash ]; then 
auto="\033[32m已设置开机启动！\033[0m"
auto1="禁用clash开机启动"
else
auto="\033[31m未设置开机启动！\033[0m"
auto1="允许clash开机启动"
fi
#获取运行模式
if [ ! -n "$redir_mod" ]; then
sed -i "2i\redir_mod=Redir模式" $ccfg
redir_mod=Redir模式
fi
#获取运行状态
status=`ps |grep -w 'clash -d'|grep -v grep|wc -l`
if [[ $status -gt 0 ]];then
run="\033[32m正在运行（$redir_mod）\033[0m"
uid=`ps |grep -w 'clash -d'|grep -v grep|awk '{print $1}'`
VmRSS=`cat /proc/$uid/status|grep -w VmRSS|awk '{print $2,$3}'`
  #获取运行时长
  if [ "$start_time" > 0 ] > /dev/null 2>&1; then 
  time=$((`date +%s`-$start_time))
  day=$(($time/86400))
    if [[ $day != 0 ]]; then 
    day=$day天
    else
    day=""
    fi
  time=`date -u -d @${time} +"%-H小时%-M分%-S秒"`
  fi
else
run="\033[31m没有运行（$redir_mod）\033[0m"
fi
#输出状态
echo -----------------------------------------------
echo -e "Clash服务"$run"，"$auto""
if [ $status -gt 0 ];then
echo -e "当前内存占用：\033[44m"$VmRSS"\033[0m，已运行：\033[46;30m"$day"\033[44;37m"$time"\033[0m"
fi
#安装clash核心
if [ ! -f $clashdir/clash ];then
echo -e "\033[31m没有找到核心文件，请先下载clash核心！\033[0m"
source $clashdir/getdate.sh
getcore
fi
}
clashstart(){

/etc/init.d/clash start
sleep 1
status=`ps |grep -w 'clash -d'|grep -v grep|wc -l`
	if [[ $status -gt 0 ]];then
		echo -----------------------------------------------
		echo -e "\033[32mclash服务已启动！\033[0m"
		echo -e "可以使用\033[30;47m http://clash.razord.top \033[0m管理clash内置规则"
		host=$(ubus call network.interface.lan status | grep \"address\" | grep -oE '[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}';)
		echo -e "Host地址:\033[30;46m $host \033[0m端口:\033[30;46m 9999 \033[0m"
	else
		echo -----------------------------------------------
		echo -e "\033[31mclash服务启动失败！请检查配置文件！\033[0m"
	fi
}
clashlink(){
#获取订阅规则
if [ ! -n "$rule_link" ]; then
sed -i '/rule_link=*/'d $ccfg
sed -i "4i\rule_link=1" $ccfg
rule_link=1
fi
#获取后端服务器地址
if [ ! -n "$server_link" ]; then
sed -i '/server_link=*/'d $ccfg
sed -i "5i\server_link=1" $ccfg
server_link=1
fi
echo -----------------------------------------------
echo -e "\033[44m 实验性功能，遇问题请加TG群反馈：\033[42;30m t.me/clashfm \033[0m"
echo -e "\033[32m 欢迎使用订阅功能！\033[0m"
echo -e 1 输入节点/订阅链接
echo -e 2 输入完整clash规则链接
echo -e 3 选取代理规则模版
echo -e 4 选择配置生成服务器
echo -e 5 还原配置文件
echo -e 6 手动更新订阅
echo -e 7 设置自动更新（未完成）
echo -e 0 返回上级菜单
read -p "请输入对应数字 > " num
if [ -z $num ];then
  echo -----------------------------------------------
  echo -e "\033[31m请输入正确的数字！\033[0m"
  clashsh
elif [[ $num == 1 ]];then
  if [ -n "$Url" ];then
    echo -----------------------------------------------
    echo -e "\033[33m检测到已记录的订阅链接：\033[0m"
    echo -e "\033[4;32m$Url\033[0m"
    echo -----------------------------------------------
	read -p "清空链接/追加导入？[1/0] > " res
	  if [ "$res" = '1' ]; then
      Url=""
	  echo -----------------------------------------------
	  echo -e "\033[31m链接已清空！\033[0m"
	  fi
  fi
  source $clashdir/getdate.sh
  getlink
  
elif [[ $num == 2 ]];then
  if [ -n "$Url" ];then
    echo -----------------------------------------------
    echo -e "\033[33m检测到已记录的订阅链接：\033[0m"
    echo -e "\033[4;32m$Url\033[0m"
    echo -----------------------------------------------
	read -p "清空链接/追加导入？[1/0] > " res
	  if [ "$res" = '1' ]; then
      Url=""
	  echo -----------------------------------------------
	  echo -e "\033[31m链接已清空！\033[0m"
	  fi
  fi
  source $clashdir/getdate.sh
  getlink2
elif [[ $num == 3 ]];then
  echo -----------------------------------------------
  echo -e "\033[44m 实验性功能，遇问题请加TG群反馈：\033[42;30m t.me/clashfm \033[0m"
  echo 当前使用规则为：$rule_link
  echo 1 ACL4SSR默认通用版（推荐）
  echo 2 ACL4SSR精简全能版（推荐）
  echo 3 ACL4SSR通用版去广告加强
  echo 4 ACL4SSR精简版去广告加强
  echo 5 ACL4SSR通用版无去广告
  echo 0 返回上级菜单
  read -p "请输入对应数字 > " num
    if [ -z $num ];then
	  echo -----------------------------------------------
	  echo -e "\033[31m请输入正确的数字！\033[0m"
	  clashlink
	else
	  #将对应标记值写入mark
	  sed -i '/rule_link*/'d $ccfg
      sed -i "4i\rule_link="$num"" $ccfg	
	  echo -----------------------------------------------	  
	  echo -e "\033[32m设置成功！返回上级菜单！\033[0m"
	  clashlink
	fi
elif [[ $num == 4 ]];then
  echo -----------------------------------------------
  echo -e "\033[44m 实验性功能，遇问题请加TG群反馈：\033[42;30m t.me/clashfm \033[0m"
  echo 当前使用后端为：$server_link
  echo 1 subconverter-web.now.sh
  echo 2 subconverter.herokuapp.com
  echo 3 subcon.py6.pw
  echo 4 api.dler.io
  echo 5 api.wcc.best
  echo 6 skapi.cool
  echo 7 subconvert.dreamcloud.pw
  echo 0 返回上级菜单
  read -p "请输入对应数字 > " num
    if [ -z $num ];then
	  echo -----------------------------------------------
	  echo -e "\033[31m请输入正确的数字！\033[0m"
	  clashlink
	else
	  if [[ $num == 0 ]];then
	  clashlink
	  fi
	  #将对应标记值写入mark
	  sed -i '/server_link*/'d $ccfg
      sed -i "4i\server_link="$num"" $ccfg		
      echo -----------------------------------------------	  
	  echo -e "\033[32m设置成功！返回上级菜单！\033[0m"
	  clashlink
	fi
elif [[ $num == 5 ]];then
  yamlbak=$yaml.bak
  if [ ! -f "$yaml".bak ];then
  echo -----------------------------------------------
  echo -e "\033[31m没有找到配置文件的备份！\033[0m"
  else
  echo -----------------------------------------------
  echo -e 备份文件共有"\033[32m`wc -l < $yamlbak`\033[0m"行内容，当前文件共有"\033[32m`wc -l < $yaml`\033[0m"行内容
  read -p "确认还原配置文件？此操作不可逆！[1/0] > " res
	if [ "$res" = '1' ]; then
	mv $yamlbak $yaml
    echo -----------------------------------------------
	echo -e "\033[32m配置文件已还原！请手动重启clash服务！\033[0m"
	else 
    echo -----------------------------------------------
	echo -e "\033[31m操作已取消！返回上级菜单！\033[0m"
	fi
  fi
  clashsh
elif [[ $num == 6 ]];then
  if [ ! -n "$Url" ];then
    echo -----------------------------------------------
    echo 没有找到你的订阅链接！请先输入链接！
  clashlink
  else
    echo -----------------------------------------------
    echo -----------------------------------------------
    echo -e "\033[33m当前系统记录的订阅链接为：\033[0m"
    echo -e "\033[4;32m$Url\033[0m"
    echo -----------------------------------------------
	read -p "确认更新配置文件？[1/0] > " res
	  if [ "$res" = '1' ]; then
	  source $clashdir/getdate.sh
      getyaml
	  fi
	  clashlink
  fi
elif [[ $num == 0 ]];then
  clashsh
else
  echo -----------------------------------------------
  echo -e "\033[31m请输入正确的数字！\033[0m"
  exit;
fi
}
clashadv(){
#获取高级配置
if [ ! -n "$skip_cert" ]; then
sed -i "2i\skip_cert=已开启" $ccfg
skip_cert=已开启
fi
if [ ! -n "$common_ports" ]; then
sed -i "2i\common_ports=未开启" $ccfg
common_ports=未开启
fi
if [ ! -n "$dns_mod" ]; then
sed -i "2i\dns_mod=redir_host" $ccfg
dns_mod=redir_host
fi
#
echo -----------------------------------------------
echo -e "\033[33m欢迎使用高级模式菜单：\033[0m"
echo -e "\033[32m修改配置后请手动重启clash服务！\033[0m"
echo -e "1 切换运行模式:     \033[32m$redir_mod\033[0m"
echo -e "2 切换DNS运行模式： \033[32m$dns_mod\033[0m"
echo -e "3 跳过本地证书验证：\033[32m$skip_cert\033[0m ————解决节点证书验证错误"
echo -e "4 只代理常用端口：  \033[32m$common_ports\033[0m ————用于屏蔽P2P流量"
echo -e "9 重启clash服务"
echo -e "0 返回上级菜单 \033[0m"
read -p "请输入对应数字 > " num
if [[ $num -le 9 ]] > /dev/null 2>&1; then 
  if [[ $num == 0 ]]; then
    clashsh
  
  elif [[ $num == 1 ]]; then
    echo -----------------------------------------------
    echo -e "当前代理模式为：\033[47;30m $redir_mod \033[0m"
	echo -e "\033[33m切换模式后需要手动重启clash服务以生效！\033[0m"
	echo "1 Tun模式：  支持UDP转发且延迟低"
	echo "             但CPU及内存占用更高"
	echo "             适合外服游戏用户"
	echo "2 Redir模式：CPU以及内存占用较低"
	echo "             但不支持UDP流量转发"
	echo "             日常使用推荐此模式"
	echo 0 返回上级菜单 
	read -p "请输入对应数字 > " num	
	if [[ $num == 0 ]]; then
		clashadv
	elif [[ $num == 1 ]]; then
		redir_mod=Tun模式
	elif [[ $num == 2 ]]; then
		redir_mod=Redir模式
	else
		echo -----------------------------------------------
		echo -e "\033[31m请输入正确的数字！\033[0m"
		clashadv
	fi
	sed -i '/redir_mod*/'d $ccfg
	sed -i "1i\redir_mod=$redir_mod" $ccfg
	echo -----------------------------------------------	
	echo -e "\033[33m已设为 $redir_mod ！！\033[0m"
	clashadv
	  
  elif [[ $num == 2 ]]; then
    echo -----------------------------------------------
    echo -e "当前DNS运行模式为：\033[47;30m $dns_mod \033[0m"
	echo -e "\033[33m切换模式后需要手动重启clash服务以生效！\033[0m"
	echo "1 fake-ip模式：   响应速度更快"
	echo "                  但可能和部分软件有冲突"
	echo "2 redir_host模式：使用稳定，兼容性好"
	echo "                  响应速度略慢"
	echo 0 返回上级菜单 
	read -p "请输入对应数字 > " num
	if [[ $num == 0 ]]; then
		clashadv
	elif [[ $num == 1 ]]; then
		dns_mod='fake-ip'
	elif [[ $num == 2 ]]; then
		dns_mod='redir_host'
	else
		echo -----------------------------------------------
		echo -e "\033[31m请输入正确的数字！\033[0m"
		clashadv
	fi
	sed -i '/dns_mod*/'d $ccfg
	sed -i "1i\dns_mod=$dns_mod" $ccfg
	echo -----------------------------------------------	
	echo -e "\033[33m已设为 $dns_mod 模式！！\033[0m"
	clashadv
	
  elif [[ $num == 3 ]]; then	
	sed -i '/skip_cert*/'d $ccfg
	echo -----------------------------------------------
	if [ "$skip_cert" = "未开启" ] > /dev/null 2>&1; then 
		sed -i "1i\skip_cert=已开启" $ccfg
		echo -e "\033[33m已设为开启跳过本地证书验证！！\033[0m"
		skip_cert=已开启
	else
		/etc/init.d/clash enable
		sed -i "1i\skip_cert=未开启" $ccfg
		echo -e "\033[33m已设为禁止跳过本地证书验证！！\033[0m"
		skip_cert=未开启
	fi
	clashadv
	
  elif [[ $num == 4 ]]; then	
	sed -i '/common_ports*/'d $ccfg
	echo -----------------------------------------------
	if [ "$common_ports" = "未开启" ] > /dev/null 2>&1; then 
		sed -i "1i\common_ports=已开启" $ccfg
		echo -e "\033[33m已设为仅代理（22,53,587,465,995,993,143,80,443）等常用端口！！\033[0m"
		common_ports=已开启
	else
		/etc/init.d/clash enable
		sed -i "1i\common_ports=未开启" $ccfg
		echo -e "\033[33m已设为代理全部端口！！\033[0m"
		common_ports=未开启
	fi
	clashadv  
  elif [[ $num == 9 ]]; then	
	if [ $status -gt 0 ];then
		echo -----------------------------------------------
		/etc/init.d/clash stop
		echo -e "\033[31mClash服务已停止！\033[0m"
	fi
	clashstart
	clashsh
  else
    echo -e "\033[31m暂未支持的选项！\033[0m"
    clashadv
  fi
else
  echo -----------------------------------------------
  echo -e "\033[31m请输入正确的数字！\033[0m"
  clashsh
fi
exit;
}
update(){
echo -----------------------------------------------
echo -e "\033[33m欢迎使用更新功能：\033[0m"
echo -e "感谢：\033[32mClash \033[0m作者\033[36m Dreamacro\033[0m 项目地址：\033[32mhttps://github.com/Dreamacro/clash\033[0m"
echo -e "感谢：\033[32mClashR \033[0m作者\033[36m BROBIRD\033[0m 项目地址：\033[32mhttps://github.com/BROBIRD/clash\033[0m"
echo -e "感谢：\033[32mtun2socks \033[0m作者\033[36m eycorsican\033[0m 项目地址：\033[32mhttps://github.com/eycorsican/go-tun2socks\033[0m"
echo -e "感谢：\033[32m更多的帮助过我的人！\033[0m"
echo -----------------------------------------------
echo 1 更新管理脚本
echo 2 更新\替换clash核心文件
echo 3 更新GeoIP数据库（施工中）
echo 9 卸载clash
echo 0 返回上级菜单 
read -p "请输入对应数字 > " num
if [[ $num -le 9 ]] > /dev/null 2>&1; then 
  if [[ $num == 0 ]]; then
    clashsh
	
  elif [[ $num == 1 ]]; then	
	source $clashdir/getdate.sh
	getsh	
	
  elif [[ $num == 2 ]]; then	
	source $clashdir/getdate.sh
	getcore

  elif [[ $num == 3 ]]; then	
	source $clashdir/getdate.sh
	getgeo
	
  elif [[ $num == 9 ]]; then
    read -p "确认卸载clash？（警告：该操作不可逆！）[1/0] " res
	if [ "$res" = '1' ]; then
    /etc/init.d/clash disable
    /etc/init.d/clash stop
    rm -rf $clashdir
    rm -rf /etc/init.d/clash
    rm -rf $csh
	sed -i '/alias clash=*/'d /etc/profile
	sed -i '/export clashdir=*/'d /etc/profile
    echo 已卸载clash相关文件！
	fi
    exit;
  else
    echo -e "\033[31m暂未支持的选项！\033[0m"
    update
  fi
else
  echo -----------------------------------------------
  echo -e "\033[31m请输入正确的数字！\033[0m"
  clashsh
fi
exit;
}
clashsh(){
#############################
getconfig
#############################
echo -e " 1 \033[32m启动/重启\033[0mclash服务"
echo -e " 2 clash\033[33m高级设置\033[0m"
echo -e " 3 \033[31m停止\033[0mclash服务"
echo -e " 4 $auto1"
echo -e " 5 设置定时任务（施工中）"
echo -e " 6 导入\033[32m节点/订阅\033[0m链接"
echo -e " 8 \033[36m测试菜单\033[0m"
echo -e " 9 \033[32m更新\033[0m脚本及相关文件"
echo -e " 0 \033[35m退出\033[0m脚本"
read -p "请输入对应数字 > " num
if [[ $num -le 9 ]] > /dev/null 2>&1; then 
  if [[ $num == 0 ]]; then
	exit;
  
  elif [[ $num == 1 ]]; then
	if [ ! -f "$yaml" ];then
		echo -----------------------------------------------
		echo -e "\033[31m没有找到配置文件，请先导入节点/订阅链接！\033[0m"
		clashlink
	fi
    if [ $status -gt 0 ];then
		echo -----------------------------------------------
		/etc/init.d/clash stop > /dev/null 2>&1
		echo -e "\033[31mClash服务已停止！\033[0m"
	fi
	clashstart
	clashsh
  
  elif [[ $num == 2 ]]; then
	clashadv

  elif [[ $num == 3 ]]; then
		/etc/init.d/clash stop > /dev/null 2>&1
		echo -----------------------------------------------
		echo -e "\033[31mClash服务已停止！\033[0m"
		echo -----------------------------------------------
		exit;

  elif [[ $num == 4 ]]; then
		echo -----------------------------------------------
		if [ "$auto1" = "允许clash开机启动" ]; then 
			/etc/init.d/clash enable
			echo -e "\033[32m已设置Clash开机启动！\033[0m"
		else
			/etc/init.d/clash disable
			echo -e "\033[33m已禁止Clash开机启动！\033[0m"
		fi
		clashsh

  elif [[ $num == 5 ]]; then
echo -----------------------------------------------
echo -e "\033[31m正在施工中，敬请期待！\033[0m"
echo -e "\033[32m正在施工中，敬请期待！\033[0m"
echo -e "\033[33m正在施工中，敬请期待！\033[0m"
echo -e "\033[34m正在施工中，敬请期待！\033[0m"
echo -e "\033[35m正在施工中，敬请期待！\033[0m"
echo -e "\033[36m正在施工中，敬请期待！\033[0m"
  clashsh
    
  elif [[ $num == 6 ]]; then
	clashlink

  elif [[ $num == 8 ]]; then
	echo -----------------------------------------------
	echo -e "\033[31m这里是测试命令菜单\033[0m"
	echo 1 不能正常运行时，手动运行clash查看报错信息：
	echo 2 查看系统53端口占用 
	echo 3 测试ssl加密（aes-128-gcm）跑分
	echo 4 查看iptables端口转发详情
	echo 5 查看config.yaml前40行
	echo 6 测试代理服务器连通性
	echo 0 返回上级目录！
	read -p "请输入对应数字 > " num
	if [[ $num == 0 ]]; then
		clashsh
	elif [[ $num == 1 ]]; then
		echo -e "\033[31m如有报错请截图后到TG群询问！！！\033[0m"
		$clashdir/clash -d $clashdir & { sleep 3 ; kill $! & }
		echo -e "\033[31m如有报错请截图后到TG群询问！！！\033[0m"
		exit;
	elif [[ $num == 2 ]]; then
		echo -----------------------------------------------
		netstat -ntulp |grep 53
		echo -----------------------------------------------
		exit;
	elif [[ $num == 3 ]]; then
		echo -----------------------------------------------
		openssl speed -multi 4 -evp aes-128-gcm
		echo -----------------------------------------------
		exit;
	elif [[ $num == 4 ]]; then
		echo -----------------------------------------------
		iptables  -t nat  -L PREROUTING --line-numbers
		echo -----------------------------------------------
		exit;
	elif [[ $num == 5 ]]; then
		echo -----------------------------------------------
		sed -n '1,40p' $yaml
		echo -----------------------------------------------
		exit;
	elif [[ $num == 6 ]]; then
		echo 注意：测试结果不保证一定准确！
		delay=`curl -kx socks5://127.0.0.1:7891 -o /dev/null -s -w '%{time_starttransfer}' 'https://google.tw' & { sleep 3 ; kill $! & }` > /dev/null 2>&1
		delay=`echo |awk "{print $delay*1000}"` > /dev/null 2>&1
		echo -----------------------------------------------
		if [ `echo ${#delay}` -gt 1 ];then
			echo -e "\033[32m连接成功！响应时间为："$delay" ms\033[0m"
		else
			echo -e "\033[31m连接超时！请重试或检查节点配置！\033[0m"
		fi
		clashsh
	else
		echo -----------------------------------------------
		echo -e "\033[31m请输入正确的数字！\033[0m"
		clashsh
	fi

  elif [[ $num == 9 ]]; then
	update
	
  else
	echo -----------------------------------------------
	echo -e "\033[31m请输入正确的数字！\033[0m"
  fi
  exit 1
else
	echo -----------------------------------------------
	echo -e "\033[31m请输入正确的数字！\033[0m"
fi
exit 1
}
clashsh