diff --git a/bin/yacd.tar.gz b/bin/yacd.tar.gz
new file mode 100644
index 0000000..252e909
Binary files /dev/null and b/bin/yacd.tar.gz differ
diff --git a/scripts/clash.sh b/scripts/clash.sh
index dda12c2..ab7d610 100644
--- a/scripts/clash.sh
+++ b/scripts/clash.sh
@@ -16,10 +16,13 @@ fi
 ccfg=$clashdir/mark
 yaml=$clashdir/config.yaml
 #检查/读取标识文件
-[ ! -f $ccfg ]&& echo '#标识clash运行状态的文件，不明勿动！' >> $ccfg
+[ ! -f $ccfg ] && echo '#标识clash运行状态的文件，不明勿动！' > $ccfg
 source $ccfg
 #检查mac地址记录
 [ ! -f $clashdir/mac ] && touch $clashdir/mac
+#dashboard目录位置
+[ -d /www/clash ] && dbdir=/www/clash && hostdir=/clash
+[ -d $clashdir/ui ] && dbdir=$clashdir/ui && hostdir=":$db_port/ui"
 #开机自启相关
 if [ -f /etc/rc.common ];then
 	if [ -n "$(find /etc/rc.d -name '*clash')" ];then
@@ -86,22 +89,6 @@ if [ -n "$PID" ];then
 fi
 echo -e "TG群：\033[36;4mhttps://t.me/clashfm\033[0m"
 echo -----------------------------------------------
-#检查clash核心
-if [ ! -f $clashdir/clash ];then
-	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-	echo -e "\033[31m没有找到核心文件，请先下载clash核心！\033[0m"
-	checkupdate
-	source $clashdir/getdate.sh
-	getcore
-fi
-#检查GeoIP数据库
-if [ ! -f $clashdir/Country.mmdb ];then
-	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-	echo -e "\033[31m没有找到GeoIP数据库文件，请下载数据库文件！\033[0m"
-	checkupdate
-	source $clashdir/getdate.sh
-	getgeo
-fi
 #检查定时任务配置文件
 if [ -z "$cronpath" ];then
 	[ -d /etc/crontabs/ ] && cronpath="/etc/crontabs/root"
@@ -110,14 +97,19 @@ if [ -z "$cronpath" ];then
 	[ -d /etc/storage/cron/crontabs ] && cronpath="/etc/storage/cron/crontabs/admin"
 	[ -n "$cronpath" ] && sed -i "1i\cronpath=\'$cronpath\'" $ccfg
 fi
+#检查新手引导
+if [ -z "$userguide" ];then
+	read -p "检测到首次运行，是否启动新手引导？(1/0) > " res
+	echo -----------------------------------------------
+	sed -i "1i\userguide=1" $ccfg
+	[ "$res" = 1 ] && source $clashdir/getdate.sh && userguide
+fi
 }
 start_over(){
 	[ $? -eq 1 ] && exit
 	echo -e "\033[32mclash服务已启动！\033[0m"
-	if [ -d /www/clash ];then
-		echo -e "请使用\033[30;47m http://$host/clash \033[0m管理内置规则"
-	elif [ -d $clashdir/ui  ];then
-		echo -e "请使用\033[30;47m http://$host:$db_port/ui \033[0m管理内置规则"
+	if [ -n "$dbdir" ];then
+		echo -e "请使用\033[30;47m http://$host$dbdir \033[0m管理内置规则"
 	else
 		echo -e "可使用\033[30;47m http://clash.razord.top \033[0m管理内置规则"
 		echo -e "Host地址:\033[36m $host \033[0m 端口:\033[36m $db_port \033[0m"
@@ -293,6 +285,21 @@ checkport(){
 	done
 }
 clashstart(){
+	#检查clash核心
+	if [ ! -f $clashdir/clash ];then
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo -e "\033[31m没有找到核心文件，请先下载clash核心！\033[0m"
+		checkupdate
+		source $clashdir/getdate.sh && getcore
+	fi
+	#检查GeoIP数据库
+	if [ ! -f $clashdir/Country.mmdb ];then
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo -e "\033[31m没有找到GeoIP数据库文件，请下载数据库文件！\033[0m"
+		checkupdate
+		source $clashdir/getdate.sh && getgeo
+	fi
+	#检查yaml配置文件
 	if [ ! -f "$yaml" ];then
 		echo -----------------------------------------------
 		echo -e "\033[31m没有找到配置文件，请先导入配置文件！\033[0m"
@@ -631,7 +638,7 @@ if [[ $num -le 9 ]] > /dev/null 2>&1; then
 			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 			read -p "是否配置自动代理PAC文件(1/0) > " res
 				if [ "$res" = 1 ]; then
-					source $clashdir/getdate.sh && catpac
+					source $clashdir/getdate.sh && setpac
 				fi
 		else
 			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
@@ -758,7 +765,7 @@ echo -----------------------------------------------
 echo -e " 1 使用自定义配置:	\033[36m$modify_yaml\033[0m	————不使用内置规则修饰config.yaml"
 echo -e " 2 启用ipv6支持:	\033[36m$ipv6_support\033[0m	————实验性功能，可能不稳定"
 echo -e " 3 使用保守方式启动:	\033[36m$start_old\033[0m	————切换时会停止clash服务"
-echo -e " 4 代理本机流量:	\033[36m$local_proxy\033[0m	————配置本机代理环境变量"
+echo -e " 4 代理本机流量:	\033[36m$local_proxy\033[0m	————使用环境变量或者PAC配置本机代理"
 echo -e " 5 手动指定clash运行端口及秘钥"
 echo -e " 6 手动配置内置DNS服务"
 echo -----------------------------------------------
@@ -828,14 +835,14 @@ if [[ $num -le 9 ]] > /dev/null 2>&1; then
 		if [ "$local_proxy" = "未开启" ] > /dev/null 2>&1; then 
 			sed -i "1i\local_proxy=已开启" $ccfg
 			local_proxy=已开启
-			$clashdir/start.sh set_proxy $mix_port
-			echo -e "\033[32m已经将代理参数写入环境变量~\033[0m"
+			$clashdir/start.sh set_proxy $mix_port $dbdir
+			echo -e "\033[32m已经成功配置本机代理~\033[0m"
 			echo -e "\033[36m如未生效，请重新启动终端或重新连接SSH！\033[0m"
 		else
 			sed -i "1i\local_proxy=未开启" $ccfg
 			local_proxy=未开启
 			$clashdir/start.sh unset_proxy
-			echo -e "\033[33m已经将代理参数从环境变量移除！！\033[0m"	
+			echo -e "\033[33m已经停用本机代理规则！！\033[0m"	
 		fi
 		sleep 1
 		clashadv 		
@@ -924,7 +931,7 @@ if [[ $num -le 9 ]] > /dev/null 2>&1; then
 		
 	elif [[ $num == 5 ]]; then	
 		source $clashdir/getdate.sh
-		catpac
+		setpac
 		update
 
 	elif [[ $num == 7 ]]; then	
@@ -1177,74 +1184,7 @@ if [[ $num -le 9 ]] > /dev/null 2>&1; then
 		clashadv
 
 	elif [[ $num == 8 ]]; then
-		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-		echo -e "\033[30;47m这里是测试命令菜单\033[0m"
-		echo -e "\033[33m如遇问题尽量运行相应命令后截图发群\033[0m"
-		echo -e "磁盘占用/所在目录："
-		du -h $clashdir
-		echo -----------------------------------------------
-		echo " 1 查看clash运行时的报错信息"
-		echo " 2 查看系统DNS端口(:53)占用 "
-		echo " 3 测试ssl加密（aes-128-gcm）跑分"
-		echo " 4 查看iptables端口转发详情"
-		echo " 5 查看config.yaml前40行"
-		echo " 6 测试代理服务器连通性（google.tw)"
-		echo -----------------------------------------------
-		echo " 0 返回上级目录！"
-		read -p "请输入对应数字 > " num
-		if [ -z "$num" ]; then
-			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-			echo -e "\033[31m请输入正确的数字！\033[0m"
-			clashsh
-		elif [[ $num == 0 ]]; then
-			clashsh
-		elif [[ $num == 1 ]]; then
-			$clashdir/start.sh stop
-			echo -----------------------------------------------
-			$clashdir/clash -t -d $clashdir 
-			echo -----------------------------------------------
-			echo -e "\033[31m如有报错请截图后到TG群询问！！！\033[0m"
-			exit;
-		elif [[ $num == 2 ]]; then
-			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-			netstat -ntulp |grep 53
-			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-			echo -e "可以使用\033[44m netstat -ntulp |grep xxx \033[0m来查询任意(xxx)端口"
-			exit;
-		elif [[ $num == 3 ]]; then
-			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-			openssl speed -multi 4 -evp aes-128-gcm
-			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-			exit;
-		elif [[ $num == 4 ]]; then
-			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-			iptables  -t nat  -L PREROUTING --line-numbers
-			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-			iptables  -t nat  -L clash --line-numbers
-			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-			iptables  -t nat  -L clash_dns --line-numbers
-			exit;
-		elif [[ $num == 5 ]]; then
-			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-			sed -n '1,40p' $yaml
-			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-			exit;
-		elif [[ $num == 6 ]]; then
-			echo 注意：测试结果不保证一定准确！
-			delay=`curl -kx ${authentication}@127.0.0.1:$mix_port -o /dev/null -s -w '%{time_starttransfer}' 'https://google.tw' & { sleep 3 ; kill $! & }` > /dev/null 2>&1
-			delay=`echo |awk "{print $delay*1000}"` > /dev/null 2>&1
-			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-			if [ `echo ${#delay}` -gt 1 ];then
-				echo -e "\033[32m连接成功！响应时间为："$delay" ms\033[0m"
-			else
-				echo -e "\033[31m连接超时！请重试或检查节点配置！\033[0m"
-			fi
-			clashsh
-		else
-			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-			echo -e "\033[31m请输入正确的数字！\033[0m"
-			clashsh
-		fi
+		source $clashdir/getdate.sh && testcommand
 
 	elif [[ $num == 9 ]]; then
 		update
diff --git a/scripts/getdate.sh b/scripts/getdate.sh
index 72c3923..025aad3 100644
--- a/scripts/getdate.sh
+++ b/scripts/getdate.sh
@@ -2,260 +2,260 @@
 # Copyright (C) Juewuy
 
 linkconfig(){
-echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-echo -e "\033[44m 实验性功能，遇问题请加TG群反馈：\033[42;30m t.me/clashfm \033[0m"
-echo 当前使用规则为：$rule_link
-echo 1	ACL4SSR通用版无去广告（推荐）
-echo 2	ACL4SSR精简全能版（推荐）
-echo 3	ACL4SSR通用版+去广告加强
-echo 4	ACL4SSR精简版+去广告加强
-echo 5	ACL4SSR重度全分组+奈飞分流
-echo 6	ACL4SSR重度全分组+去广告加强
-echo 7	洞主规则精简版（推荐）
-echo 8	洞主规则重度完整版
-echo 9	神机规则高级版
-echo 10	神机规则-回国专用
-echo 11	李哥规则-墙洞专用
-echo 12	基础规则-仅Geoip CN+Final
-echo 13	网易云解锁-仅规则分组
-echo -----------------------------------------------
-echo 0 返回上级菜单
-read -p "请输入对应数字 > " num
-if [ -z "$num" ] || [[ $num -gt 13 ]];then
 	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-	echo -e "\033[31m请输入正确的数字！\033[0m"
-elif [[ "$num" = "0" ]];then
-	echo 
-elif [[ $num -le 13 ]];then
-	#将对应标记值写入mark
-	sed -i '/rule_link*/'d $ccfg
-	sed -i "4i\rule_link="$num"" $ccfg	
-	rule_link=$num
-	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~	  
-	echo -e "\033[32m设置成功！返回上级菜单\033[0m"
-fi
-}
-linkserver(){
-echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-echo -e "\033[44m 实验性功能，遇问题请加TG群反馈：\033[42;30m t.me/clashfm \033[0m"
-echo -e "\033[36m 感谢 https://github.com/tindy2013/subconverter \033[0m"
-echo 当前使用后端为：$server_link
-echo 1 subcon.dlj.tf
-echo 2 subconverter.herokuapp.com
-echo 3 subcon.py6.pw
-echo 4 api.dler.io
-echo 5 api.wcc.best
-echo -----------------------------------------------
-echo 0 返回上级菜单
-read -p "请输入对应数字 > " num
-if [ -z "$num" ] || [[ $num -gt 5 ]];then
-	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-	echo -e "\033[31m请输入正确的数字！\033[0m"
-elif [[ "$num" = 0 ]];then
-	echo
-elif [[ $num -le 5 ]];then
-	#将对应标记值写入mark
-	sed -i '/server_link*/'d $ccfg
-	sed -i "4i\server_link="$num"" $ccfg	
-	server_link=$num
-	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~	  
-	echo -e "\033[32m设置成功！返回上级菜单\033[0m"
-fi
-}
-linkfilter(){
-[ -z "$exclude" ] && exclude="未设置"
-echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-echo -e "\033[44m 实验性功能，遇问题请加TG群反馈：\033[42;30m t.me/clashfm \033[0m"
-echo -e "\033[33m当前过滤关键字：\033[47;30m$exclude\033[0m"
-echo -----------------------------------------------
-echo -e "\033[33m匹配关键字的节点会在导入时被【屏蔽】！！！\033[0m"
-echo -e "多个关键字可以用\033[30;47m | \033[0m号分隔"
-echo -e "\033[32m支持正则表达式\033[0m，空格请使用\033[30;47m + \033[0m号替代"
-echo -----------------------------------------------
-echo -e " 000   \033[31m删除\033[0m关键字"
-echo -e " 回车  取消输入并返回上级菜单"
-echo -----------------------------------------------
-read -p "请输入关键字 > " exclude
-if [ -z "$exclude" ]; then
-	linkset
-elif [ "$exclude" = '000' ]; then
-	echo -----------------------------------------------
-	exclude=''
-	echo -e "\033[31m 已删除节点过滤关键字！！！\033[0m"
-fi
-sed -i '/exclude=*/'d $ccfg
-sed -i "1i\exclude=\'$exclude\'" $ccfg
-linkset
-}
-linkfilter2(){
-[ -z "$include" ] && include="未设置"
-echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-echo -e "\033[44m 实验性功能，遇问题请加TG群反馈：\033[42;30m t.me/clashfm \033[0m"
-echo -e "\033[33m当前筛选关键字：\033[47;30m$include\033[0m"
-echo -----------------------------------------------
-echo -e "\033[33m仅有匹配关键字的节点才会被【导入】！！！\033[0m"
-echo -e "多个关键字可以用\033[30;47m | \033[0m号分隔"
-echo -e "\033[32m支持正则表达式\033[0m，空格请使用\033[30;47m + \033[0m号替代"
-echo -----------------------------------------------
-echo -e " 000   \033[31m删除\033[0m关键字"
-echo -e " 回车  取消输入并返回上级菜单"
-echo -----------------------------------------------
-read -p "请输入关键字 > " include
-if [ -z "$include" ]; then
-	linkset
-elif [ "$include" = '000' ]; then
-	echo -----------------------------------------------
-	include=''
-	echo -e "\033[31m 已删除节点匹配关键字！！！\033[0m"
-fi
-sed -i '/include=*/'d $ccfg
-sed -i "1i\include=\'$include\'" $ccfg
-linkset
-}
-linkset(){
-if [ -n "$Url" ];then
-	[ -z "$skip_cert" ] && skip_cert=已开启
-	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-	echo -e "\033[47;30m请检查输入的链接是否正确：\033[0m"
-	echo -e "\033[32;4m$Url\033[0m"
-	echo -----------------------------------------------
-	echo -e " 1 \033[36m生成配置文件\033[0m（原文件将被备份）"
-	echo -e " 2 设置\033[31m节点过滤\033[0m关键字 \033[47;30m$exclude\033[0m"
-	echo -e " 3 设置\033[32m节点筛选\033[0m关键字 \033[47;30m$include\033[0m"
-	echo -e " 4 选取在线\033[33m配置规则模版\033[0m"
-	echo -e " 5 \033[0m选取在线生成服务器\033[0m"
-	echo -e " 6 \033[0m跳过本地证书验证：	\033[36m$skip_cert\033[0m   ————自建tls节点务必开启"
-	echo -----------------------------------------------
-	echo -e " 0 \033[31m取消导入\033[0m并返回上级菜单"
+	echo -e "\033[44m 实验性功能，遇问题请加TG群反馈：\033[42;30m t.me/clashfm \033[0m"
+	echo 当前使用规则为：$rule_link
+	echo 1	ACL4SSR通用版无去广告（推荐）
+	echo 2	ACL4SSR精简全能版（推荐）
+	echo 3	ACL4SSR通用版+去广告加强
+	echo 4	ACL4SSR精简版+去广告加强
+	echo 5	ACL4SSR重度全分组+奈飞分流
+	echo 6	ACL4SSR重度全分组+去广告加强
+	echo 7	洞主规则精简版（推荐）
+	echo 8	洞主规则重度完整版
+	echo 9	神机规则高级版
+	echo 10	神机规则-回国专用
+	echo 11	李哥规则-墙洞专用
+	echo 12	基础规则-仅Geoip CN+Final
+	echo 13	网易云解锁-仅规则分组
 	echo -----------------------------------------------
+	echo 0 返回上级菜单
 	read -p "请输入对应数字 > " num
-	if [ -z "$num" ]; then
-		clashlink
-	elif [ "$num" = '0' ]; then
-		clashlink
-	elif [ "$num" = '1' ]; then
-		#将用户链接写入mark
-		sed -i '/Url=*/'d $ccfg
-		sed -i '/Https=*/'d $ccfg
-		sed -i "6i\Url=\'$Url\'" $ccfg
-		Https=""
-		#获取在线yaml文件
-		$clashdir/start.sh getyaml
-		start_over
-		exit;
-	elif [ "$num" = '2' ]; then
-		linkfilter
-		linkset
-	elif [ "$num" = '3' ]; then
-		linkfilter2
-		linkset
-	elif [ "$num" = '4' ]; then
-		linkconfig
-		linkset
-	elif [ "$num" = '5' ]; then
-		linkserver
-		linkset
-	elif [ "$num" = '6' ]; then
-		sed -i '/skip_cert*/'d $ccfg
-		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-		if [ "$skip_cert" = "未开启" ] > /dev/null 2>&1; then 
-			sed -i "1i\skip_cert=已开启" $ccfg
-			#echo -e "\033[33m已设为开启跳过本地证书验证！！\033[0m"
-			skip_cert=已开启
-		else
-			sed -i "1i\skip_cert=未开启" $ccfg
-			#echo -e "\033[33m已设为禁止跳过本地证书验证！！\033[0m"
-			skip_cert=未开启
-		fi
-		linkset
-	else
+	if [ -z "$num" ] || [[ $num -gt 13 ]];then
 		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 		echo -e "\033[31m请输入正确的数字！\033[0m"
-		linkset
+	elif [[ "$num" = "0" ]];then
+		echo 
+	elif [[ $num -le 13 ]];then
+		#将对应标记值写入mark
+		sed -i '/rule_link*/'d $ccfg
+		sed -i "4i\rule_link="$num"" $ccfg	
+		rule_link=$num
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~	  
+		echo -e "\033[32m设置成功！返回上级菜单\033[0m"
 	fi
-	clashlink
-fi
 }
-getlink(){
-#设置输入循环
-i=1
-while [ $i -le 99 ]
-do
+linkserver(){
 	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-	echo -e "\033[44m 遇问题请加TG群反馈：\033[42;30m t.me/clashfm \033[0m"
-	echo -e "\033[31m本功能依赖第三方网站在线服务实现，脚本本身不提供任何代理服务！\033[0m"
+	echo -e "\033[44m 实验性功能，遇问题请加TG群反馈：\033[42;30m t.me/clashfm \033[0m"
+	echo -e "\033[36m 感谢 https://github.com/tindy2013/subconverter \033[0m"
+	echo 当前使用后端为：$server_link
+	echo 1 subcon.dlj.tf
+	echo 2 subconverter.herokuapp.com
+	echo 3 subcon.py6.pw
+	echo 4 api.dler.io
+	echo 5 api.wcc.best
 	echo -----------------------------------------------
-	echo -e "支持批量导入订阅文件的在线链接"
-	echo -----------------------------------------------
-	echo -e " 0   \033[31m撤销输入\033[0m"
-	echo -e "回车 \033[32m完成输入\033[0m并\033[33m开始导入\033[0m配置文件！"
-	echo -----------------------------------------------
-	read -p "请输入第${i}个链接 > " url
-	test=$(echo $url | grep "://")
-	url=`echo ${url/\ \(*\)/''}`   #删除恶心的超链接内容
-	url=`echo ${url/*\&url\=/""}`   #将clash完整链接还原成单一链接
-	url=`echo ${url/\&config\=*/""}`   #将clash完整链接还原成单一链接
-	url=`echo ${url//\&/\%26}`   #将分隔符 & 替换成urlcode：%26
-	if [[ "$test" != "" ]];then
-		if [ -z "$Url" ];then
-			Url="$url"
-		else
-			Url="$Url"\|"$url"
-		fi
-		i=$((i+1))
-	elif [ -z "$url" ];then
-		[ -n "$Url" ] && linkset
-	elif [[ $url == 0 ]];then
+	echo 0 返回上级菜单
+	read -p "请输入对应数字 > " num
+	if [ -z "$num" ] || [[ $num -gt 5 ]];then
 		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-		echo -e "\033[31m已撤销并删除所有已输入的链接！！！\033[0m"
-		Url=""
-		sleep 1
-		clashlink
-	else
-		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-		echo -e "\033[31m请输入正确的订阅链接！！！\033[0m"
+		echo -e "\033[31m请输入正确的数字！\033[0m"
+	elif [[ "$num" = 0 ]];then
+		echo
+	elif [[ $num -le 5 ]];then
+		#将对应标记值写入mark
+		sed -i '/server_link*/'d $ccfg
+		sed -i "4i\server_link="$num"" $ccfg	
+		server_link=$num
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~	  
+		echo -e "\033[32m设置成功！返回上级菜单\033[0m"
 	fi
-done
-####
-echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-echo 输入太多啦，可能会导致订阅失败！
-echo "多个较短的链接请尽量用“|”分隔以一次性输入！"
-clashlink
-} 
-getlink2(){
-echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-echo -e "\033[33m仅限导入完整clash配置文件链接！！！\033[0m"
-echo -e "可以使用\033[32m https://acl4ssr.netlify.app \033[0m在线生成配置文件"
-echo -e "\033[36m导入后如无法运行，请使用【导入订阅】功能"
-echo -----------------------------------------------
-echo -e "\033[33m0 返回上级菜单\033[0m"
-echo -----------------------------------------------
-read -p "请输入完整链接 > " Https
-test=$(echo $Https | grep -iE "http.*://" )
-Https=`echo ${Https/\ \(*\)/''}`   #删除恶心的超链接内容
-if [ -n "$Https" -a -n "$test" ];then
+}
+linkfilter(){
+	[ -z "$exclude" ] && exclude="未设置"
 	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-	echo -e 请检查输入的链接是否正确：
-	echo -e "\033[4m$Https\033[0m"
-	read -p "确认导入配置文件？原配置文件将被更名为config.yaml.bak![1/0] > " res
-		if [ "$res" = '1' ]; then
+	echo -e "\033[44m 实验性功能，遇问题请加TG群反馈：\033[42;30m t.me/clashfm \033[0m"
+	echo -e "\033[33m当前过滤关键字：\033[47;30m$exclude\033[0m"
+	echo -----------------------------------------------
+	echo -e "\033[33m匹配关键字的节点会在导入时被【屏蔽】！！！\033[0m"
+	echo -e "多个关键字可以用\033[30;47m | \033[0m号分隔"
+	echo -e "\033[32m支持正则表达式\033[0m，空格请使用\033[30;47m + \033[0m号替代"
+	echo -----------------------------------------------
+	echo -e " 000   \033[31m删除\033[0m关键字"
+	echo -e " 回车  取消输入并返回上级菜单"
+	echo -----------------------------------------------
+	read -p "请输入关键字 > " exclude
+	if [ -z "$exclude" ]; then
+		linkset
+	elif [ "$exclude" = '000' ]; then
+		echo -----------------------------------------------
+		exclude=''
+		echo -e "\033[31m 已删除节点过滤关键字！！！\033[0m"
+	fi
+	sed -i '/exclude=*/'d $ccfg
+	sed -i "1i\exclude=\'$exclude\'" $ccfg
+	linkset
+}
+linkfilter2(){
+	[ -z "$include" ] && include="未设置"
+	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+	echo -e "\033[44m 实验性功能，遇问题请加TG群反馈：\033[42;30m t.me/clashfm \033[0m"
+	echo -e "\033[33m当前筛选关键字：\033[47;30m$include\033[0m"
+	echo -----------------------------------------------
+	echo -e "\033[33m仅有匹配关键字的节点才会被【导入】！！！\033[0m"
+	echo -e "多个关键字可以用\033[30;47m | \033[0m号分隔"
+	echo -e "\033[32m支持正则表达式\033[0m，空格请使用\033[30;47m + \033[0m号替代"
+	echo -----------------------------------------------
+	echo -e " 000   \033[31m删除\033[0m关键字"
+	echo -e " 回车  取消输入并返回上级菜单"
+	echo -----------------------------------------------
+	read -p "请输入关键字 > " include
+	if [ -z "$include" ]; then
+		linkset
+	elif [ "$include" = '000' ]; then
+		echo -----------------------------------------------
+		include=''
+		echo -e "\033[31m 已删除节点匹配关键字！！！\033[0m"
+	fi
+	sed -i '/include=*/'d $ccfg
+	sed -i "1i\include=\'$include\'" $ccfg
+	linkset
+}
+linkset(){
+	if [ -n "$Url" ];then
+		[ -z "$skip_cert" ] && skip_cert=已开启
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo -e "\033[47;30m请检查输入的链接是否正确：\033[0m"
+		echo -e "\033[32;4m$Url\033[0m"
+		echo -----------------------------------------------
+		echo -e " 1 \033[36m生成配置文件\033[0m（原文件将被备份）"
+		echo -e " 2 设置\033[31m节点过滤\033[0m关键字 \033[47;30m$exclude\033[0m"
+		echo -e " 3 设置\033[32m节点筛选\033[0m关键字 \033[47;30m$include\033[0m"
+		echo -e " 4 选取在线\033[33m配置规则模版\033[0m"
+		echo -e " 5 \033[0m选取在线生成服务器\033[0m"
+		echo -e " 6 \033[0m跳过本地证书验证：	\033[36m$skip_cert\033[0m   ————自建tls节点务必开启"
+		echo -----------------------------------------------
+		echo -e " 0 \033[31m取消导入\033[0m并返回上级菜单"
+		echo -----------------------------------------------
+		read -p "请输入对应数字 > " num
+		if [ -z "$num" ]; then
+			clashlink
+		elif [ "$num" = '0' ]; then
+			clashlink
+		elif [ "$num" = '1' ]; then
 			#将用户链接写入mark
 			sed -i '/Url=*/'d $ccfg
 			sed -i '/Https=*/'d $ccfg
-			sed -i "6i\Https=\'$Https\'" $ccfg
+			sed -i "6i\Url=\'$Url\'" $ccfg
+			Https=""
 			#获取在线yaml文件
 			$clashdir/start.sh getyaml
 			start_over
 			exit;
+		elif [ "$num" = '2' ]; then
+			linkfilter
+			linkset
+		elif [ "$num" = '3' ]; then
+			linkfilter2
+			linkset
+		elif [ "$num" = '4' ]; then
+			linkconfig
+			linkset
+		elif [ "$num" = '5' ]; then
+			linkserver
+			linkset
+		elif [ "$num" = '6' ]; then
+			sed -i '/skip_cert*/'d $ccfg
+			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+			if [ "$skip_cert" = "未开启" ] > /dev/null 2>&1; then 
+				sed -i "1i\skip_cert=已开启" $ccfg
+				#echo -e "\033[33m已设为开启跳过本地证书验证！！\033[0m"
+				skip_cert=已开启
+			else
+				sed -i "1i\skip_cert=未开启" $ccfg
+				#echo -e "\033[33m已设为禁止跳过本地证书验证！！\033[0m"
+				skip_cert=未开启
+			fi
+			linkset
+		else
+			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+			echo -e "\033[31m请输入正确的数字！\033[0m"
+			linkset
 		fi
-elif [[ $Https == 0 ]];then
-	clashlink
-else
+		clashlink
+	fi
+}
+getlink(){
+	#设置输入循环
+	i=1
+	while [ $i -le 99 ]
+	do
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo -e "\033[44m 遇问题请加TG群反馈：\033[42;30m t.me/clashfm \033[0m"
+		echo -e "\033[31m本功能依赖第三方网站在线服务实现，脚本本身不提供任何代理服务！\033[0m"
+		echo -----------------------------------------------
+		echo -e "支持批量导入订阅文件的在线链接"
+		echo -----------------------------------------------
+		echo -e " 0   \033[31m撤销输入\033[0m"
+		echo -e "回车 \033[32m完成输入\033[0m并\033[33m开始导入\033[0m配置文件！"
+		echo -----------------------------------------------
+		read -p "请输入第${i}个链接 > " url
+		test=$(echo $url | grep "://")
+		url=`echo ${url/\ \(*\)/''}`   #删除恶心的超链接内容
+		url=`echo ${url/*\&url\=/""}`   #将clash完整链接还原成单一链接
+		url=`echo ${url/\&config\=*/""}`   #将clash完整链接还原成单一链接
+		url=`echo ${url//\&/\%26}`   #将分隔符 & 替换成urlcode：%26
+		if [[ "$test" != "" ]];then
+			if [ -z "$Url" ];then
+				Url="$url"
+			else
+				Url="$Url"\|"$url"
+			fi
+			i=$((i+1))
+		elif [ -z "$url" ];then
+			[ -n "$Url" ] && linkset
+		elif [[ $url == 0 ]];then
+			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+			echo -e "\033[31m已撤销并删除所有已输入的链接！！！\033[0m"
+			Url=""
+			sleep 1
+			clashlink
+		else
+			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+			echo -e "\033[31m请输入正确的订阅链接！！！\033[0m"
+		fi
+	done
+	####
 	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-	echo -e "\033[31m请输入正确的配置文件链接地址！！！\033[0m"
-	echo -e "\033[33m链接地址必须是http或者https开头的形式\033[0m"
+	echo 输入太多啦，可能会导致订阅失败！
+	echo "多个较短的链接请尽量用“|”分隔以一次性输入！"
 	clashlink
-fi
+} 
+getlink2(){
+	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+	echo -e "\033[33m仅限导入完整clash配置文件链接！！！\033[0m"
+	echo -e "可以使用\033[32m https://acl4ssr.netlify.app \033[0m在线生成配置文件"
+	echo -e "\033[36m导入后如无法运行，请使用【导入订阅】功能"
+	echo -----------------------------------------------
+	echo -e "\033[33m0 返回上级菜单\033[0m"
+	echo -----------------------------------------------
+	read -p "请输入完整链接 > " Https
+	test=$(echo $Https | grep -iE "http.*://" )
+	Https=`echo ${Https/\ \(*\)/''}`   #删除恶心的超链接内容
+	if [ -n "$Https" -a -n "$test" ];then
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo -e 请检查输入的链接是否正确：
+		echo -e "\033[4m$Https\033[0m"
+		read -p "确认导入配置文件？原配置文件将被更名为config.yaml.bak![1/0] > " res
+			if [ "$res" = '1' ]; then
+				#将用户链接写入mark
+				sed -i '/Url=*/'d $ccfg
+				sed -i '/Https=*/'d $ccfg
+				sed -i "6i\Https=\'$Https\'" $ccfg
+				#获取在线yaml文件
+				$clashdir/start.sh getyaml
+				start_over
+				exit;
+			fi
+	elif [[ $Https == 0 ]];then
+		clashlink
+	else
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo -e "\033[31m请输入正确的配置文件链接地址！！！\033[0m"
+		echo -e "\033[33m链接地址必须是http或者https开头的形式\033[0m"
+		clashlink
+	fi
 }
 gettar(){
 	result=$(curl -w %{http_code} -kLo /tmp/clashfm.tar.gz $tarurl)
@@ -305,332 +305,424 @@ gettar(){
 	rm -rf $clashdir/clash.service
 }
 getsh(){
-echo -----------------------------------------------
-echo -e "当前脚本版本为：\033[33m $versionsh_l \033[0m"
-echo -e "最新脚本版本为：\033[32m $release_new \033[0m"
-echo -----------------------------------------------
-read -p "是否更新脚本？[1/0] > " res
-if [ "$res" = '1' ]; then
-	tarurl=$update_url/bin/clashfm.tar.gz
-	#下载更新
-	gettar
-	#提示
 	echo -----------------------------------------------
-	echo -e "\033[32m管理脚本更新成功!\033[0m"
+	echo -e "当前脚本版本为：\033[33m $versionsh_l \033[0m"
+	echo -e "最新脚本版本为：\033[32m $release_new \033[0m"
 	echo -----------------------------------------------
-	exit;
-	else
-	update
-fi
+	read -p "是否更新脚本？[1/0] > " res
+	if [ "$res" = '1' ]; then
+		tarurl=$update_url/bin/clashfm.tar.gz
+		#下载更新
+		gettar
+		#提示
+		echo -----------------------------------------------
+		echo -e "\033[32m管理脚本更新成功!\033[0m"
+		echo -----------------------------------------------
+		exit;
+		else
+		update
+	fi
 }
 getcore(){
-#获取核心及版本信息
-[ ! -f $clashdir/clash ] && clashcore="未安装核心"
-#获取设备处理器架构
-	getcputype(){
-		cputype=$(uname -ms | tr ' ' '_' | tr '[A-Z]' '[a-z]')
-		[ -n "$(echo $cputype | grep -E "linux.*armv.*")" ] && cpucore="armv5"
-		[ -n "$(echo $cputype | grep -E "linux.*armv7.*")" ] && [ -n "$(cat /proc/cpuinfo | grep vfp)" ] && cpucore="armv7"
-		[ -n "$(echo $cputype | grep -E "linux.*aarch64.*|linux.*armv8.*")" ] && cpucore="armv8"
-		[ -n "$(echo $cputype | grep -E "linux.*86.*")" ] && cpucore="386"
-		[ -n "$(echo $cputype | grep -E "linux.*86_64.*")" ] && cpucore="amd64"
-		if [ -n "$(echo $cputype | grep -E "linux.*mips.*")" ];then
-			mipstype=$(echo -n I | hexdump -o | awk '{ print substr($2,6,1); exit}') #通过判断大小端判断mips或mipsle
-			if [ "$mipstype" = "1" ];then
-				cpucore="mipsle-softfloat"
-				#[ -n "$(uname -a | grep -E "M2100")" ] && cpucore="mipsle-hardfloat"
-			else
-				cpucore="mips-softfloat"
+	#获取核心及版本信息
+	[ ! -f $clashdir/clash ] && clashcore="未安装核心"
+	#获取设备处理器架构
+		getcputype(){
+			cputype=$(uname -ms | tr ' ' '_' | tr '[A-Z]' '[a-z]')
+			[ -n "$(echo $cputype | grep -E "linux.*armv.*")" ] && cpucore="armv5"
+			[ -n "$(echo $cputype | grep -E "linux.*armv7.*")" ] && [ -n "$(cat /proc/cpuinfo | grep vfp)" ] && cpucore="armv7"
+			[ -n "$(echo $cputype | grep -E "linux.*aarch64.*|linux.*armv8.*")" ] && cpucore="armv8"
+			[ -n "$(echo $cputype | grep -E "linux.*86.*")" ] && cpucore="386"
+			[ -n "$(echo $cputype | grep -E "linux.*86_64.*")" ] && cpucore="amd64"
+			if [ -n "$(echo $cputype | grep -E "linux.*mips.*")" ];then
+				mipstype=$(echo -n I | hexdump -o | awk '{ print substr($2,6,1); exit}') #通过判断大小端判断mips或mipsle
+				if [ "$mipstype" = "1" ];then
+					cpucore="mipsle-softfloat"
+					#[ -n "$(uname -a | grep -E "M2100")" ] && cpucore="mipsle-hardfloat"
+				else
+					cpucore="mips-softfloat"
+				fi
 			fi
+		}
+	###
+	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+	[ -z "$cpucore" ] && getcputype
+	echo -e "当前clash核心：\033[47;30m $clashcore \033[46;30m$clashv\033[0m"
+	echo -e "当前系统处理器架构：\033[32m $cpucore \033[0m"
+	echo -e "\033[33m请选择需要下载的核心版本！\033[0m"
+	echo -----------------------------------------------
+	echo "1 clash：     稳定，内存占用小，推荐！"
+	echo "(官方正式版)  不支持Tun模式、混合模式"
+	echo
+	echo "2 clashpre：  支持Tun模式、混合模式"
+	echo "(高级预览版)  内存占用更高"
+	echo
+	echo "3 手动指定处理器架构"
+	echo -----------------------------------------------
+	echo 0 返回上级菜单 
+	read -p "请输入对应数字 > " num
+		if [ -z "$num" ]; then
+			echo -----------------------------------------------
+			echo -e "\033[31m请输入正确的数字！\033[0m"
+			update
+		elif [[ $num == 0 ]]; then
+			update
+		elif [[ $num == 1 ]]; then
+			clashcore=clash
+			version=$clash_v
+		elif [[ $num == 2 ]]; then
+			clashcore=clashpre
+			version=$clashpre_v
+		elif [[ $num == 3 ]]; then
+			cpucore_list="armv5 armv7 armv8 386 amd64 mipsle-softfloat mipsle-hardfloat mips-softfloat"
+			echo -----------------------------------------------
+			echo -e "\033[31m仅适合脚本无法正确识别核心或核心无法正常运行时使用！\033[0m"
+			echo -e "当前可供在线下载的处理器架构为："
+			echo -e "\033[32m$cpucore_list\033[0m"
+			echo -e "如果您的CPU架构未在以上列表中，请运行【uname -a】命令,并复制好返回信息"
+			echo -e "之后前往 t.me/clashfm 群提交或 github.com/juewuy/ShellClash 提交issue"
+			echo -----------------------------------------------
+			read -p "请手动输入处理器架构 > " cpucore
+			if [ -z "$(echo $cpucore_list |grep "$cpucore")" ];then
+				echo -e "\033[31m请输入正确的处理器架构！\033[0m"
+				sleep 1
+				cpucore=""
+			fi
+			getcore
+		else
+			echo -----------------------------------------------
+			echo -e "\033[31m请输入正确的数字！\033[0m"
+			update
 		fi
-	}
-###
-echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-[ -z "$cpucore" ] && getcputype
-echo -e "当前clash核心：\033[47;30m $clashcore \033[46;30m$clashv\033[0m"
-echo -e "当前系统处理器架构：\033[32m $cpucore \033[0m"
-echo -e "\033[33m请选择需要下载的核心版本！\033[0m"
-echo -----------------------------------------------
-echo "1 clash：     稳定，内存占用小，推荐！"
-echo "(官方正式版)  不支持Tun模式、混合模式"
-echo
-echo "2 clashpre：  支持Tun模式、混合模式"
-echo "(高级预览版)  内存占用更高"
-echo
-echo "3 手动指定处理器架构"
-echo -----------------------------------------------
-echo 0 返回上级菜单 
-read -p "请输入对应数字 > " num
-	if [ -z "$num" ]; then
+	#生成链接
+	corelink="$update_url/bin/$clashcore/clash-linux-$cpucore"
+	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+	echo 正在连接服务器获取clash核心文件…………链接地址为：
+	echo -e "\033[4;32m$corelink\033[0m"
+	echo 如无法正常下载可以手动复制到浏览器下载核心文件！
+	echo -e "\033[36m~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~"
+	echo -e "|                                             |"
+	echo -e "|         需要一点时间，请耐心等待！          |"
+	echo -e "|       \033[0m如长时间没有数据请用ctrl+c退出        |"
+	echo -e "~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\033[0m"
+	#获取在线clash核心文件
+	result=$(curl -w %{http_code} -kLo /tmp/clash.new $corelink)
+	if [ "$result" != "200" ];then
 		echo -----------------------------------------------
-		echo -e "\033[31m请输入正确的数字！\033[0m"
-		update
-	elif [[ $num == 0 ]]; then
-		update
-	elif [[ $num == 1 ]]; then
-		clashcore=clash
-		version=$clash_v
-	elif [[ $num == 2 ]]; then
-		clashcore=clashpre
-		version=$clashpre_v
-	elif [[ $num == 3 ]]; then
-		cpucore_list="armv5 armv7 armv8 386 amd64 mipsle-softfloat mipsle-hardfloat mips-softfloat"
+		echo -e "\033[31m核心文件下载失败！\033[0m"
 		echo -----------------------------------------------
-		echo -e "\033[31m仅适合脚本无法正确识别核心或核心无法正常运行时使用！\033[0m"
-		echo -e "当前可供在线下载的处理器架构为："
-		echo -e "\033[32m$cpucore_list\033[0m"
-		echo -e "如果您的CPU架构未在以上列表中，请运行【uname -a】命令,并复制好返回信息"
-		echo -e "之后前往 t.me/clashfm 群提交或 github.com/juewuy/ShellClash 提交issue"
-		echo -----------------------------------------------
-		read -p "请手动输入处理器架构 > " cpucore
-		if [ -z "$(echo $cpucore_list |grep "$cpucore")" ];then
-			echo -e "\033[31m请输入正确的处理器架构！\033[0m"
-			sleep 1
-			cpucore=""
-		fi
 		getcore
 	else
-		echo -----------------------------------------------
+		echo -e "\033[32m$clashcore核心下载成功，正在替换！\033[0m"
+		mv /tmp/clash.new $clashdir/clash
+		chmod  777 $clashdir/clash  #授予权限
+		sed -i '/clashcore=*/'d $ccfg
+		sed -i "1i\clashcore=$clashcore" $ccfg
+		sed -i '/clashv=*/'d $ccfg
+		sed -i "1i\clashv=$version" $ccfg
+		rm -rf /tmp/clashversion
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo -e "\033[32m$clashcore核心安装成功！\033[0m"
+	fi			
+}
+getgeo(){
+	echo -----------------------------------------------
+	echo -e "当前GeoIP版本为：\033[33m $Geo_v \033[0m"
+	echo -e "最新GeoIP版本为：\033[32m $GeoIP_v \033[0m"
+	echo -----------------------------------------------
+	read -p "是否更新数据库文件？[1/0] > " res
+	if [ "$res" = '1' ]; then
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo 正在从服务器获取数据库文件…………
+		result=$(curl -w %{http_code} -kLo /tmp/Country.mmdb $update_url/bin/Country.mmdb)
+		if [ "$result" != "200" ];then
+			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+			echo -e "\033[31m文件下载失败！\033[0m"
+			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+			getgeo
+		else
+			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+			echo -e "\033[32mGeoIP数据库文件下载成功！\033[0m"
+			mv /tmp/Country.mmdb $clashdir/Country.mmdb
+			sed -i '/Geo_v=*/'d $ccfg
+			sed -i "1i\Geo_v=$GeoIP_v" $ccfg
+			rm -rf /tmp/clashversion
+		fi
+	else
+		clashsh
+	fi
+}
+getdb(){
+	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+	echo -e "\033[36m安装本地版dashboard管理面板\033[0m"
+	echo -e "\033[32m打开管理面板的速度更快且更稳定\033[0m"
+	echo -----------------------------------------------
+	echo -e "请选择面板\033[33m安装类型：\033[0m"
+	echo -----------------------------------------------
+	echo -e " 1 安装\033[32m官方面板\033[0m(约500kb)"
+	echo -e " 2 安装\033[32mYacd面板\033[0m(约1.1mb)"
+	echo -e " 3 卸载\033[33m本地面板\033[0m"
+	echo " 0 返回上级菜单"
+	read -p "请输入对应数字 > " num
+
+	if [ -z "$num" ];then
+		update
+	elif [ "$num" = '1' ]; then
+		db_type=clashdb
+	elif [ "$num" = '2' ]; then
+		db_type=yacd
+	elif [ "$num" = '3' ]; then
+		read -p "确认卸载本地面板？(1/0) > " res
+		if [ "$res" = 1 ];then
+			rm -rf /www/clash
+			rm -rf $clashdir/ui
+			echo -----------------------------------------------
+			echo -e "\033[31m面板已经卸载！\033[0m"
+			sleep 1
+		fi
+		update
+	else
 		echo -e "\033[31m请输入正确的数字！\033[0m"
 		update
 	fi
-#生成链接
-corelink="$update_url/bin/$clashcore/clash-linux-$cpucore"
-echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-echo 正在连接服务器获取clash核心文件…………链接地址为：
-echo -e "\033[4;32m$corelink\033[0m"
-echo 如无法正常下载可以手动复制到浏览器下载核心文件！
-echo -e "\033[36m~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~"
-echo -e "|                                             |"
-echo -e "|         需要一点时间，请耐心等待！          |"
-echo -e "|       \033[0m如长时间没有数据请用ctrl+c退出        |"
-echo -e "~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\033[0m"
-#获取在线clash核心文件
-result=$(curl -w %{http_code} -kLo /tmp/clash.new $corelink)
-if [ "$result" != "200" ];then
 	echo -----------------------------------------------
-	echo -e "\033[31m核心文件下载失败！\033[0m"
+	echo -e "请选择面板\033[33m安装目录：\033[0m"
 	echo -----------------------------------------------
-	getcore
-else
-	echo -e "\033[32m$clashcore核心下载成功，正在替换！\033[0m"
-	mv /tmp/clash.new $clashdir/clash
-	chmod  777 $clashdir/clash  #授予权限
-	sed -i '/clashcore=*/'d $ccfg
-	sed -i "1i\clashcore=$clashcore" $ccfg
-	sed -i '/clashv=*/'d $ccfg
-	sed -i "1i\clashv=$version" $ccfg
-	rm -rf /tmp/clashversion
-	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-	echo -e "\033[32m$clashcore核心替换成功，请手动启动clash服务！\033[0m"
-	clashsh
-fi			
-}
-getgeo(){
-echo -----------------------------------------------
-echo -e "当前GeoIP版本为：\033[33m $Geo_v \033[0m"
-echo -e "最新GeoIP版本为：\033[32m $GeoIP_v \033[0m"
-echo -----------------------------------------------
-read -p "是否更新数据库文件？[1/0] > " res
-if [ "$res" = '1' ]; then
-	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-	echo 正在从服务器获取数据库文件…………
-	result=$(curl -w %{http_code} -kLo /tmp/Country.mmdb $update_url/bin/Country.mmdb)
-	if [ "$result" != "200" ];then
-		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-		echo -e "\033[31m文件下载失败！\033[0m"
-		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-		getgeo
-	else
-		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-		echo -e "\033[32mGeoIP数据库文件下载成功！\033[0m"
-		mv /tmp/Country.mmdb $clashdir/Country.mmdb
-		sed -i '/Geo_v=*/'d $ccfg
-		sed -i "1i\Geo_v=$GeoIP_v" $ccfg
-		rm -rf /tmp/clashversion
-		clashsh
-	fi
-else
-clashsh
-fi
-}
-getdb(){
-#host=$(ubus call network.interface.lan status | grep \"address\" | grep -oE '[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}';)
-echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-echo -e "\033[36m安装本地版dashboard管理面板\033[0m"
-echo -e "\033[32m打开管理面板的速度更快且更稳定\033[0m"
-echo -----------------------------------------------
-echo -e "请选择面板\033[33m安装类型：\033[0m"
-echo -----------------------------------------------
-echo -e " 1 安装\033[32m官方面板\033[0m(约500kb)"
-echo -e " 2 安装\033[32mYacd面板\033[0m(约1.1mb)"
-echo -e " 3 卸载\033[33m本地面板\033[0m"
-echo " 0 返回上级菜单"
-read -p "请输入对应数字 > " num
+	echo -e " 1 在$clashdir/ui目录安装(推荐！安装后会自动重启clash服务！)"
+	echo -e " 2 在/www/clash目录安装(依赖Openwrt的Nginx服务，可能失败！)"
+	echo -----------------------------------------------
+	echo " 0 返回上级菜单"
+	read -p "请输入对应数字 > " num
 
-if [ -z "$num" ];then
-	update
-elif [ "$num" = '1' ]; then
-	db_type=clashdb
-elif [ "$num" = '2' ]; then
-	db_type=yacd
-elif [ "$num" = '3' ]; then
-	read -p "确认卸载本地面板？(1/0) > " res
-	if [ "$res" = 1 ];then
-		rm -rf /www/clash
-		rm -rf $clashdir/ui
-		echo -----------------------------------------------
-		echo -e "\033[31m面板已经卸载！\033[0m"
-		sleep 1
-	fi
-	update
-else
-	echo -e "\033[31m请输入正确的数字！\033[0m"
-	update
-fi
-echo -----------------------------------------------
-echo -e "请选择面板\033[33m安装目录：\033[0m"
-echo -----------------------------------------------
-echo -e " 1 在$clashdir/ui目录安装(推荐！安装后会自动重启clash服务！)"
-echo -e " 2 在/www/clash目录安装(依赖Openwrt的Nginx服务，可能失败！)"
-echo -----------------------------------------------
-echo " 0 返回上级菜单"
-read -p "请输入对应数字 > " num
-
-if [ -z "$num" ];then
-	update
-elif [ "$num" = '1' ]; then
-	dbdir=$clashdir/ui
-	hostdir=":$db_port/ui\033[0;36m访问面板"
-elif [ "$num" = '2' ]; then
-	dbdir=/www/clash
-	hostdir='/clash\033[0;36m访问面板'
-else
-	update
-fi
-	#下载及安装
-	if [ -d /www/clash -o -d $clashdir/ui ];then
-		echo -----------------------------------------------
-		echo -e "\033[31m检测到您已经安装过本地面板了！\033[0m"
-		echo -----------------------------------------------
-		read -p "是否覆盖安装？[1/0] > " res
-		if [ -z "$res" ]; then
-			update
-		elif [ "$res" = 1 ]; then
-			rm -rf /www/clash
-			rm -rf $clashdir/ui
-		else
-			update
-		fi
-	fi
-	dblink="${update_url}/bin/${db_type}.tar.gz"
-	echo -----------------------------------------------
-	echo 正在连接服务器获取安装文件…………
-	result=$(curl -w %{http_code} -kLo /tmp/clashdb.tar.gz $dblink)
-	if [ "$result" != "200" ];then
-		echo -----------------------------------------------
-		echo -e "\033[31m文件下载失败！\033[0m"
-		echo -----------------------------------------------
-		getdb
+	if [ -z "$num" ];then
+		update
+	elif [ "$num" = '1' ]; then
+		dbdir=$clashdir/ui
+		hostdir=":$db_port/ui"
+	elif [ "$num" = '2' ]; then
+		dbdir=/www/clash
+		hostdir='/clash'
 	else
-		echo -e "\033[33m下载成功，正在解压文件！\033[0m"
-		mkdir -p $dbdir > /dev/null
-		tar -zxvf "/tmp/clashdb.tar.gz" -C $dbdir > /dev/null
-		[ $? -ne 0 ] && echo "文件解压失败！" && exit 1 
-		#修改默认host和端口
-		if [ "$db_type" = "clashdb" ];then
-			sed -i "s/127.0.0.1/${host}/g" $dbdir/js/*.js
-			sed -i "s/9090/${db_port}/g" $dbdir/js/*.js
-		else
-			sed -i "s/127.0.0.1/${host}/g" $dbdir/app*.js
-			sed -i "s/7892/${db_port}/g" $dbdir/app*.js
-		fi
-		[ "$dbdir" != "/www/clash" ] && $clashdir/start.sh restart
-		echo -----------------------------------------------
-		echo -e "\033[32m面板安装成功！\033[0m"
-		echo -e "\033[36m请使用\033[32;4mhttp://$host$hostdir\033[0m"
-		rm -rf /tmp/clashdb.tar.gz
-		sleep 1
 		update
 	fi
-	
-update
+		#下载及安装
+		if [ -d /www/clash -o -d $clashdir/ui ];then
+			echo -----------------------------------------------
+			echo -e "\033[31m检测到您已经安装过本地面板了！\033[0m"
+			echo -----------------------------------------------
+			read -p "是否覆盖安装？[1/0] > " res
+			if [ -z "$res" ]; then
+				update
+			elif [ "$res" = 1 ]; then
+				rm -rf /www/clash
+				rm -rf $clashdir/ui
+			else
+				update
+			fi
+		fi
+		dblink="${update_url}/bin/${db_type}.tar.gz"
+		echo -----------------------------------------------
+		echo 正在连接服务器获取安装文件…………
+		result=$(curl -w %{http_code} -kLo /tmp/clashdb.tar.gz $dblink)
+		if [ "$result" != "200" ];then
+			echo -----------------------------------------------
+			echo -e "\033[31m文件下载失败！\033[0m"
+			echo -----------------------------------------------
+			getdb
+		else
+			echo -e "\033[33m下载成功，正在解压文件！\033[0m"
+			mkdir -p $dbdir > /dev/null
+			tar -zxvf "/tmp/clashdb.tar.gz" -C $dbdir > /dev/null
+			[ $? -ne 0 ] && echo "文件解压失败！" && exit 1 
+			#修改默认host和端口
+			if [ "$db_type" = "clashdb" ];then
+				sed -i "s/127.0.0.1/${host}/g" $dbdir/js/*.js
+				sed -i "s/9090/${db_port}/g" $dbdir/js/*.js
+			else
+				sed -i "s/127.0.0.1/${host}/g" $dbdir/app*.js
+				sed -i "s/7892/${db_port}/g" $dbdir/app*.js
+			fi
+			[ "$dbdir" != "/www/clash" ] && $clashdir/start.sh restart
+			#写入配置文件
+			sed -i '/dbdir*/'d $ccfg
+			sed -i "1i\dbdir=\'$hostdir\'" $ccfg
+			echo -----------------------------------------------
+			echo -e "\033[32m面板安装成功！\033[0m"
+			echo -e "\033[36m请使用\033[32;4mhttp://$host$hostdir\033[0;36m访问面板\033[0m"
+			rm -rf /tmp/clashdb.tar.gz
+			sleep 1
+		fi
 }
 catpac(){
-#检测目录
-[ ! -d /www/clash -a ! -d $clashdir/ui ]&&echo 未检测到本地Dashboard面板，请先安装面板！&&sleep 1&&getdb
-#host=$(ubus call network.interface.lan status | grep \"address\" | grep -oE '[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}';)
-[ -d /www/clash ]&&dir="/www/clash"&&pac=http://$host/clash/pac
-[ -d $clashdir/ui ]&&dir="$clashdir/ui"&&pac=http://$host:$db_port/ui/pac
-echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-echo -e "\033[30;47m生成用于设备WIFI或浏览器的自动PAC代理文件\033[0m"
-echo -e "\033[33m非纯净模式不推荐使用此功能\033[0m"
-[ -f $dir/pac ]&&echo -e "PAC地址：\033[32m$pac\033[0m"
-echo -----------------------------------------------
-echo -e " 1 生成PAC文件"
-echo -e " 2 清除PAC文件"
-echo -----------------------------------------------
-echo -e " 0 返回上级菜单"
-read -p "请输入对应数字 > " num
-	if [ "$num" = '1' ]; then
-		cat > $dir/pac <<EOF
+	cat > $dbdir/pac <<EOF
 function FindProxyForURL(url, host) {
-		return "PROXY $authentication@$host:$mix_port; DIRECT;"
+	if (
+		isInNet(host, "0.0.0.0", "255.0.0.0")||
+		isInNet(host, "10.0.0.0", "255.0.0.0")||
+		isInNet(host, "127.0.0.0", "255.0.0.0")||
+		isInNet(host, "224.0.0.0", "224.0.0.0")||
+		isInNet(host, "240.0.0.0", "240.0.0.0")||
+		isInNet(host, "172.16.0.0",  "255.240.0.0")||
+		isInNet(host, "192.168.0.0", "255.255.0.0")||
+		isInNet(host, "169.254.0.0", "255.255.0.0")
+	)
+		return "DIRECT";
+	else
+		return "PROXY $host:$mix_port; DIRECT;"
 }
 EOF
-		echo -e "\033[33mPAC文件已生成！\033[0m"
-		echo -e "PAC地址：\033[32m$pac\033[0m"
-		echo "使用教程：https://baike.baidu.com/item/PAC/16292100"
-		sleep 2
-	elif [[ $num == 2 ]]; then
-		rm -rf $dir/pac
-		echo -----------------------------------------------
-		echo -e "\033[33mPAC文件已清除！\033[0m"
-		sleep 1
-	fi
+}
+setpac(){
+	#检测目录
+	[ -n "$authentication" ] && echo 检测到已经设置http代理密码，pac不支持加密代理，请先取消加密！ && sleep 1 && clashadv
+	[ ! -d /www/clash -a ! -d $clashdir/ui ] && echo 未检测到本地Dashboard面板，请先安装面板！ && sleep 1 && getdb
+	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+	echo -e "\033[30;47m生成用于设备WIFI或浏览器的自动PAC代理文件\033[0m"
+	echo -e "\033[33m适用于纯净模式或本机代理配置\033[0m"
+	[ -f $dbdir/pac ] && echo -e "PAC地址：\033[32mhttp://$host$dbdir/pac\033[0m"
+	echo -----------------------------------------------
+	echo -e " 1 生成PAC文件"
+	echo -e " 2 清除PAC文件"
+	echo -----------------------------------------------
+	echo -e " 0 返回上级菜单"
+	read -p "请输入对应数字 > " num
+		if [ "$num" = '1' ]; then
+			catpac
+			echo -e "\033[33mPAC文件已生成！\033[0m"
+			echo -e "PAC地址：\033[32mhttp://$host$dbdir/pac\033[0m"
+			echo "使用教程：https://baike.baidu.com/item/PAC/16292100"
+			sleep 2
+		elif [[ $num == 2 ]]; then
+			rm -rf $dbdir/pac
+			echo -----------------------------------------------
+			echo -e "\033[33mPAC文件已清除！\033[0m"
+			sleep 1
+		fi
 }
 setserver(){
 
-echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-echo -e "\033[30;47m您可以在此处切换在线更新时使用的资源地址\033[0m"
-echo -e "当前源：\033[4;32m$update_url\033[0m"
-echo -----------------------------------------------
-echo -e " 1 Github源(直连美国服务器)"
-echo -e " 2 Jsdelivr-CDN源(仅同步最新release版本)"
-echo -e " 3 Github源+clash代理(需开启clash服务)"
-echo -e " 4 自定义输入(请务必确保路径正确)"
-echo -e " 0 返回上级菜单"
-read -p "请输入对应数字 > " num
-if	[ -z "$num" ]; then 
 	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-	echo -e "\033[31m请输入正确的数字！\033[0m"
-	update
-elif [[ $num == 1 ]]; then
-	update_url='--resolve raw.githubusercontent.com:443:199.232.68.133 https://raw.githubusercontent.com/juewuy/ShellClash/master'
-elif [[ $num == 2 ]]; then
-	update_url='https://cdn.jsdelivr.net/gh/juewuy/ShellClash'
-elif [[ $num == 3 ]]; then
-	update_url='-x '$authentication'@127.0.0.1:'$mix_port' https://raw.githubusercontent.com/juewuy/ShellClash/master'
-elif [[ $num == 4 ]]; then
-	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-	read -p "请输入个人源路径 > " update_url
-	if [ -z "$update_url" ];then
+	echo -e "\033[30;47m您可以在此处切换在线更新时使用的资源地址\033[0m"
+	echo -e "当前源：\033[4;32m$update_url\033[0m"
+	echo -----------------------------------------------
+	echo -e " 1 Github源(直连美国服务器)"
+	echo -e " 2 Jsdelivr-CDN源(仅同步最新release版本)"
+	echo -e " 3 Github源+clash代理(需开启clash服务)"
+	echo -e " 4 自定义输入(请务必确保路径正确)"
+	echo -e " 0 返回上级菜单"
+	read -p "请输入对应数字 > " num
+	if	[ -z "$num" ]; then 
 		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-		echo -e "\033[31m取消输入，返回上级菜单\033[0m"
+		echo -e "\033[31m请输入正确的数字！\033[0m"
+		update
+	elif [[ $num == 1 ]]; then
+		update_url='--resolve raw.githubusercontent.com:443:199.232.68.133 https://raw.githubusercontent.com/juewuy/ShellClash/master'
+	elif [[ $num == 2 ]]; then
+		update_url='https://cdn.jsdelivr.net/gh/juewuy/ShellClash'
+	elif [[ $num == 3 ]]; then
+		update_url='-x '$authentication'@127.0.0.1:'$mix_port' https://raw.githubusercontent.com/juewuy/ShellClash/master'
+	elif [[ $num == 4 ]]; then
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		read -p "请输入个人源路径 > " update_url
+		if [ -z "$update_url" ];then
+			echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+			echo -e "\033[31m取消输入，返回上级菜单\033[0m"
+			update
+		fi
+	elif [[ $num == 9 ]]; then
+		update_url='http://192.168.31.30:8080/clash-for-Miwifi'
+	else
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo -e "\033[31m请输入正确的数字！\033[0m"
 		update
 	fi
-elif [[ $num == 9 ]]; then
-	update_url='http://192.168.31.30:8080/clash-for-Miwifi'
-else
+	#写入mark文件
+	sed -i '/update_url*/'d $ccfg
+	sed -i "1i\update_url=\'$update_url\'" $ccfg
 	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-	echo -e "\033[31m请输入正确的数字！\033[0m"
+	echo -e "\033[32m源地址更新成功！\033[0m"
+	release_new=""
 	update
-fi
-#写入mark文件
-sed -i '/update_url*/'d $ccfg
-sed -i "1i\update_url=\'$update_url\'" $ccfg
-echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-echo -e "\033[32m源地址更新成功！\033[0m"
-release_new=""
-update
+}
+userguide(){
+	echo 欢迎使用ShellClash新手引导！
+	checkupdate
+	getcore
+	getgeo
+	getdb
+	catpac
+	clashlink
+}
+testcommand(){
+	echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+	echo -e "\033[30;47m这里是测试命令菜单\033[0m"
+	echo -e "\033[33m如遇问题尽量运行相应命令后截图发群\033[0m"
+	echo -e "磁盘占用/所在目录："
+	du -h $clashdir
+	echo -----------------------------------------------
+	echo " 1 查看clash运行时的报错信息"
+	echo " 2 查看系统DNS端口(:53)占用 "
+	echo " 3 测试ssl加密（aes-128-gcm）跑分"
+	echo " 4 查看iptables端口转发详情"
+	echo " 5 查看config.yaml前40行"
+	echo " 6 测试代理服务器连通性（google.tw)"
+	echo " 7 重新进入新手引导"
+	echo -----------------------------------------------
+	echo " 0 返回上级目录！"
+	read -p "请输入对应数字 > " num
+	if [ -z "$num" ]; then
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo -e "\033[31m请输入正确的数字！\033[0m"
+		clashsh
+	elif [[ $num == 0 ]]; then
+		clashsh
+	elif [[ $num == 1 ]]; then
+		$clashdir/start.sh stop
+		echo -----------------------------------------------
+		$clashdir/clash -t -d $clashdir 
+		echo -----------------------------------------------
+		echo -e "\033[31m如有报错请截图后到TG群询问！！！\033[0m"
+		exit;
+	elif [[ $num == 2 ]]; then
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		netstat -ntulp |grep 53
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo -e "可以使用\033[44m netstat -ntulp |grep xxx \033[0m来查询任意(xxx)端口"
+		exit;
+	elif [[ $num == 3 ]]; then
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		openssl speed -multi 4 -evp aes-128-gcm
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		exit;
+	elif [[ $num == 4 ]]; then
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		iptables  -t nat  -L PREROUTING --line-numbers
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		iptables  -t nat  -L clash --line-numbers
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		iptables  -t nat  -L clash_dns --line-numbers
+		exit;
+	elif [[ $num == 5 ]]; then
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		sed -n '1,40p' $yaml
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		exit;
+	elif [[ $num == 6 ]]; then
+		echo 注意：测试结果不保证一定准确！
+		delay=`curl -kx ${authentication}@127.0.0.1:$mix_port -o /dev/null -s -w '%{time_starttransfer}' 'https://google.tw' & { sleep 3 ; kill $! & }` > /dev/null 2>&1
+		delay=`echo |awk "{print $delay*1000}"` > /dev/null 2>&1
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		if [ `echo ${#delay}` -gt 1 ];then
+			echo -e "\033[32m连接成功！响应时间为："$delay" ms\033[0m"
+		else
+			echo -e "\033[31m连接超时！请重试或检查节点配置！\033[0m"
+		fi
+		clashsh
+	elif [[ $num == 7 ]]; then
+		userguide
+	else
+		echo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+		echo -e "\033[31m请输入正确的数字！\033[0m"
+		clashsh
+	fi
 }
\ No newline at end of file
diff --git a/scripts/start.sh b/scripts/start.sh
index ff9f64d..442424b 100644
--- a/scripts/start.sh
+++ b/scripts/start.sh
@@ -341,7 +341,7 @@ afstart(){
 	#标记启动时间
 	mark_time
 	#设置本机代理
-	[ "$local_proxy" = "已开启" ] && $0 set_proxy $mix_port
+	[ "$local_proxy" = "已开启" ] && $0 set_proxy $mix_port $dbdir
 	#启用面板配置自动保存
 	web_save_auto
 	#后台还原面板配置
@@ -406,12 +406,32 @@ web_save)
 		web_save
 	;;
 set_proxy)
-		echo 'export all_proxy=http://127.0.0.1:'"$2" >> /etc/profile
-		echo 'export ALL_PROXY=$all_proxy' >> /etc/profile
+		#GNOME配置
+		if  gsettings --version >/dev/null 2>&1 ;then
+			gsettings set org.gnome.system.proxy autoconfig-url "http://127.0.0.1${3}/pac"
+			gsettings set org.gnome.system.proxy mode "auto"
+		#KDE配置
+		elif  kwriteconfig5 -h >/dev/null 2>&1 ;then
+			kwriteconfig5 --file kioslaverc --group "Proxy Settings" --key "ProxyType" 2
+			kwriteconfig5 --file kioslaverc --group "Proxy Settings" --key "Proxy Config Script" "http://127.0.0.1${3}/pac"
+		#环境变量方式
+		else
+			echo 'export all_proxy=http://127.0.0.1:'"$2" >> /etc/profile
+			echo 'export ALL_PROXY=$all_proxy' >> /etc/profile
+		fi
 	;;
 unset_proxy)
-		sed -i '/all_proxy/'d /etc/profile
-		sed -i '/ALL_PROXY/'d /etc/profile
+		#GNOME配置
+		if  gsettings --version >/dev/null 2>&1 ;then
+			gsettings set org.gnome.system.proxy mode "none"
+		#KDE配置
+		elif  kwriteconfig5 -h >/dev/null 2>&1 ;then
+			kwriteconfig5 --file kioslaverc --group "Proxy Settings" --key "ProxyType" 0
+		#环境变量方式
+		else
+			sed -i '/all_proxy/'d /etc/profile
+			sed -i '/ALL_PROXY/'d /etc/profile
+		fi
 	;;
 esac